It's all about the Software

I receive the PSK Beacon with -73dBm with 80cm Offset Dish, Bullseye LNB and PlutoSDR.
Had aligned the Gain of the PlutoSDR with a -73dBm Signal on 739,750MHz from my Stabilock4040 Testset.
So the readout on the SDR-Console is comparable.

73s Holger, DF6DBF

Thanks! Will try this, but i also use a Laptop with build In COM-Port. :/

73, Holger DF6DBF

Is is possible to transfer the real TX Frequency to DXLabs DX Keeeper?
Had to correct manually every QSO via QO-100 because SDR Console is sending the Downlink Freq. (10GHz)

73s Holger

Hello,
i suggest to make the polarity of the PTT input switchable.
So you can use a simple Pull-Up Resistor between RTS and CTS/DSR and you need only a external Key with 2 wires.

Tried it with an Resistor but get "reverse" Logic. (Must press my PTT to receive)

73s Holger