It's all about the Software

win11 vs console, win 11 wins 🙁
I had to discard my old win7 pc, win7 not support, hardware issues due to age and some obsolete drivers... But it worked flawlessly with wsjt... New PC with win11... Months of frustration. I can make qsos (wsjt) until...

Hi All,

I've been using Pluto with Sdr Console for QO100 for a couple of months now and thought I had an issue with tx drift, but it turns out that although beacon lock appears to to function, over time the frequency drifts by as much as 2KHz. I'm...

I am fairly new to SDR Console, have it working with OmniRig and my IC-7600. It seems to work very well and is mostly intuitive. CAT works, follows along with my 7600 when track is selected. But that is only for my VFO A. How can I get VFO B to...

Has anyone used this software to control the russion Malahit-DSP SDRs?

if so, what settings are you using?

Hello!

I have been using SDR Console for about a year for VHF use with transverters with a Hermes Lite 2. I recently purchased a second HL2 so that I don't have to swap cables to switch between 222mhz and 144mhz.
I used the second identity which...

I Have installed SDR Console V3 and use it with a simple usb dongle R820T based.

On 145.800 FMN i receive the same signal of 144.800 😓.

With other software (sdr Sharp an example) i don’t have this problem.

Can you help me ?

Alberto

Hi all,

I am experiencing problems with audio device detection as well as some issue with the tone function.

My pc (dedicated to operating QO-100 satellite) was working in May, since then it was switched off until the past weekend. I tried to...

Hi all,

I'd like to use a footswitch with my Adalm Pluto on QO100 for tx/rx switching. Is it feasible and if so how?

Thanks and regards,

Roger. (G8VLR)

In the bandscope in CW, within the filter bandwidth , the CW peck or, as in thetis , the tx frequency , depending on the sidetone that operator chooses .tnx

I came across this splitter the other day (i'm not associated with them) , i need one for the FT-2000 and the Rspdx using the rear in/out and rx button on the 2000 .

One is turning up in a few days , it looks nicely made with input protections ,...

Small issue I have with my fmduo tx/rx is that sdr console identifies it as rx only model
As such I have no way to switch antennas.

Also I cant see a way to disable LPF and thus go past 54 MHz

Any ideas team?

Hi

Has anyone managed to get the RS-HFIQ working with SDR Console? I much prefer this software than the recommended HDSDR

Hi!

the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far...

between a few Betas ago and Sept. 16, my unchanged hardware setup no longer is able to detect or use the RX888 Mk II.

log files seem interesting in that the RX888 is responding to probes and the responses look successful.
the unit serial number...

I don't see an option to get the SSB medium under receiver. What do I need to do to get this?

Thanks

A very wonderful ARINST SDR Dreamkit V1D has appeared. Planning to support your receiver using the SDR Console?

The Fusion 13 option doesn't work so well and this is on a 2021 Mac so it's fairly fast. Lots of pops etc and slow. Never did get the receiver panel to show SSB. Audio very poor on FM. The box to set configuration wasn't consistent. Maybe Parallels...

Hi Simon
Firstly huge thanks for SDRConsole. By far the best sdr program

One request I would like is a button on the Frequ database to filter by time. So when its tracking it only shows database entries that are scheduled to be on air now (with...

Firstly thank you Simon - I love SDRConsole...

One feature is if the frequency database could have a filter by time button, so when I click on a frequency, it would only show stations scheduled to be on air now, with option to see all .

In the same vein as I/Q (aka Data) recordings would it be possible to include audio (aka AF) recordings in the scheduler? I would find this extremely useful to record audio ony overnight from several different frequencies at different times. By...

I recently installed SDR Console after running a few other SDR packages, and connected up my RTL SDR Dongle. Selecting the RTL SDR as the radio with a bandwidth of 2.4 MHz, and pressing start I get - Nothing. No audio, no visual dospalys, just the...

Hello, I have a problem using the Adalm-Pluto together with the SDR-console for QO-100 communications. So far, everything works fine except of full duplex. Anytime I switch from RX to TX the console waterfall becomes completely noisy and no signal...

Hello,
I detected a bug, when changing TX filter setting e.g. from 2k7 to 2k9 for some testing...
If I want to change it back from 2k9 to 2k7, the TX settings still using the increased bandwidth settings.

This problem happens for all version of...

Opened my thoroughly awesome SWM, and oh no! Its doing some kind of weird, vertical line thing again, like I stumbled across a long time back... :shock:

Uh, actually, Happy Equinox!!! :mrgreen: :lol:

For those who missed it, set your clock/date...

I am surprised that any of the SDR control programs dont have the option of piping the output audio through TCP link. For Example DSD Plus uses this for multi SDR use. Especially if set up for two RTL SDR's. I suggest this if programs like FLDIGI or...