It's all about the Software

While my RTL-SDR v4 is working in SDRSharp, SDR++ and SDRAngel, it fails to work in SDR Console. It simply does not show anything and when I hit stop, the proces locks up. Tried v3.3 and v3.4 Beta. What did I do wrong?

Log
SDR Console tmp.txt...

Here is an attempt to find the best settings in SDRC by comparing WSPR decode performance. This is my test setup

Station setup at HB9VQQ.jpeg

First, I created a baseline to see how much the DX (Spots > 3000 km) WSPR decodes differ from each...

Hi all
I have set up Sdr console 3.4 with a sdrplay duo.
I use it for taking signals from Eshail2 but when I apply the radio definitions to make the display read the true frequency at over 10gigs as soon as I use the updown arrow keys to nudge the...

Hi Simon,

I love your World map, and especially the auroral overlay.

Can you expand briefly on where the overlay draws its data from? The auroral overlay seems to be a little bit expanded over the familiar NOAA's latest visual map. Possibly you...

Hin
I have a Win10 corei7-6700 (2016) laptop with pluto (latest firmware) used for QO100 only.

Console version: 3.4 April 21 25
SDRtelevision version: April 23 25
OBS version 31.0.3

Additionally to these programs I need a webserver (XAMPP),...

Hi,
For various reasons my antennae are some distance from my shack so upto now I have used ICRON USB ranger 2204 which allows two boxes of electronics to be connected by network cable, the box at the antenna end has the SDRs pugged into it and the...

Hi All,

I've realised after having my SDRplay in Console that the noise blanket does not work.

I switched to RX and TX on the radio and the NB was very good at removing the electric fence noisy on the common grazing area near my station....

Hello to all on the forum and apologies if I'm asking questions that have an FAQ somewhere I've not been able to find.

I be you can tell whats coming....

Okay, here goes! I'm not a computer type person (still use a paper log book), but I am...

I am not sure which driver to use for the SDR-Console to make efficient use of the Cuda Cores. NVIDIA App replaceed GeForce Experience and it is offering a choice between the Studio Driver or the Game Ready Driver. I don't understand the difference...

Hi,

I'm out of ideas, my pluto has an ethernet adapter and has worked through all versions of SDR console until the version bundled with the SDR television.I created new definitions as described but the program reports back no Pluto found at the...

Is there something special about 256k BW and certain serial numbers (or firmware) that won't work?
Ref Super Station #5
Airspy #2 and #3 will not work on 256k, but Airspy#1 works 100%.
Just put v3.4 on the site (old W7 Netbook so it's 32bit machine)...

Hi all ..

First of all ...I love this software...
However i do have a problem in conjunction with my USB Audio card and ...my SDRPlay RSPDx R2 ...

It seems as if the audio buffer sizes vary ...so I mute the audio on TX and reduce the IQ by the...

Hello Simon.

I'm transmitting with SDR Angel / Hack RF and I'm trying to decode with RTL/SDR Dongle + SDR Television.

I'm well able to see the constellation but I have Incorrect PAT checksum and impossible to decode any images.

Do you have any...

Hello, running SDRC on a win11 Dell inspiron 16 plus 7620 with 32GB RAM. With a B210 USRP connected to the USB 3.1 port, I can get the 28MHz BW option to stream smoothly. CPU use is low and GPU use is maybe 30%. But, I cannot use the 56MHz BW option...

Hello, first, thanks for awesome software. :-)

Second, while using the Ettus B210, I notice that when setting the gain to a low value, the noise floor goes up, and when setting the gain to a high value, the noise floor goes down. Also, when...

Is there a way to configure the analog bandwidth setting and the sample rate setting for UHD devices independently? I'm using a B210 and the Bandwidth menu options cover a certain range of possibilities but not everything you might want. For...

Hi Simon,
Using Console 3.3. When using QO-100, I would find it very helpul if the Rx audio could be muted automatically when the Tx button is pressed. This would make for a much quicker change-over. Perhaps you could incorporate a tick box 'Auto...

Hello,

Been quite a while, so please put up with a very basic question.
Incredible softtwre program.

Am using with an Icom R8600.
In the radio's memories, I have stored about 20 Groups, each with a load of Channels

SDRConsole locks the radio up,...

Greetings.

Can I make another suggestion re: MIDI?

Can the Data Playback functions be added to the possible commands that can be mapped to MIDI?
Would only need to be the START, STOP, PAUSE, BACK/FORWARD (by x interval as previously set).

Being...

a friend of mine use sdr console and ic-9700 as external radio with 70cm
the offset on external radio iss 10057
rx works perfectly, but if he send on 432.700 he hear himselv on websdr on 10489.700.but never see his signal at waterfall at 10489.700...

Dear Simon,

to build a full radio with pluto (may be on a raspberry...) the only feature we need is the ability to move RIT via MIDI command.
It is necessary, for example, on the QO-100 where the correspondent is not always isofrequency and SDR...

Hello,

Blame this question, and the others I will undoubtedly have
on old-age . A really great excuse for most anything.

Back to using, and learning again, the program after a long time away from
due to medical issues.

Incredible program.

Am I...

I got a new laptop that runs Windows 11. However, the key that was the right Ctrl key is now the CoPilot key. I find this very annoying. I want the Ctrl key back.

The result of Googling on this issue results in the suggestion of installing...

Hello,

I decided to record my experimentation with SDR Television - and put it all together (a little disjointed but hopefully informative) for tonight's ATV net on VK3RTV

Its on my YouTube channel and here is the link to the video...

The...

Hello.

I'm trying to run DATV Television app on two different PC but it doesn't start.
One PC is running Windows 10 and the other has Windows 11 and the Television app was installed at the same folder (C:Radio\SDR-Radio.com (V3)) of SDR Console on...