It's all about the Software

Dear Friends

I set my Lime SDR as shown in the photo to have an IF at 150 MHz.
In transmission it works perfectly from 14 MHz it transmits at 164 Mhz,
while in reception at 164 MHz I receive nothing.

Where am I going wrong?

Thanks 73 Arnaldo...

Hi Guys,

I'm a long time radio builder, and I'm planning a hybrid analog/digital RTX.

I am testing RF output with a spettrum analyzer using SDR Consolle with LIME MINI USB on the HF band TX (setting 3 MHZ Hf-TX)

In some bands, even if they are...

First of all, many thanks to Simon Brown for this excellent software! I am actively using it for QO-100 transmissions.

I am facing a problem working with Limesdr USB version and SDR Console. All tx options are turned off off late in my...

I have a problem with my Lime mini with the console. Whatever frequency I tune to there is another signal spike close to it.
With the RTL dongle it is possible to use offset tuning and it goes away.
Is there an option with either Lime settings on...

I use Lime Mini SDR for voice communication and it works fine. I am able to receive KGSTV, MMSSTV, BPSK and other modes. FT8 it does not decode. I use
Version of Lime mini is 1.30 Hardware version 2. I use virtual cable between SDR Console V3.1 and...

Hello
I am using LimeSDR Usb and Raspberry pi 4 and I need the software SDR Console.
Please, let me know the valid website, then I can download it.
Very much in advance for your solution.

Server Version V3.0.27, LimeSDR not exist in the server radio definition.
Server.png

However It existed in the previous version V3.0.22
Server3.0.22.png

Can I fix this myself?
Or is a deeper containment required?

Updated 18.04
The console...

After a significant investment by Simon to fine-tune the operation of the LimeSDR USB
Three receiving ports are still not operational and it is quite disappointing because in my project, I need them for particular uses of this SDR.
I still don't...

Hi All, I have a Lime mini sdr and although I can receive perfectly well, all transmit options are greyed out. Am I missing something obvious? I'm running 3.0.27 2123.

Regards,

Roger.

Hi all,

Is anyone else experiencing problems with the Lime-Mini transmit and SDR-Console v3.0.25 64bit? Mine will transmit once but then when I click on the Transmit button again nothing happens. The receive carries on functioning and I can see the...

4h
Quite a lot of improvements in this release:

LimeSuite library

Fixed GFIR floating point comparison
Disabled caller-saves optimization for GCC versions 9.3 onwards
Changed USB processing, FIFO and remote thread priorities on Linux systems
Fixed...