It's all about the Software

Hello,

I imagine the screen to do it is somewhere, but can't seem to find it.

Is it possible to create a Notch filter to notch out, e.g., a (selected) small am spread of frequencies with the program ?
Where, and/or how, please ?

(I know of the...

Hi,
I am wondering how SDR Console (v 3.3 ) handles the downconverter settings for by example LNB use, when the LO frequency is higher as the RX frequency.

I have connected (by bias-t) an LNB for the 19.7 to 20.2 GHz range, which has it's LO at...

Hello,
New SDR-Radio user, how to switch from straight key to paddle? and how to change the CW speed in the SDR-Console 3.2v?

Thank you

Al
W4RAM

good morning...a question that will surely spark the laughter of many but I'll ask it anyway...😅..with the same receiver and antenna (e.g. rsp1a and mla30 for example) varying the software (sdruno vs sdr console always for example) do we have the...

I'm trying to calculate the dBm of some raw IQ samples I got via gnuradio but I can't seem to find a correct link. I looked at the ADC my hackrf one uses but the IQ values don't seem to be directly related to the voltage measured. This is the...

I have used an RTL-SDR and Console as a panadapter by piping my FTDX-1200 microtune output into the RTL-SDR. It's worked very well.
Recently when I run the program it doesn't display anything, seems to have problems finding the RTL-SDR radio, and...

New user, so be gentle...
So far, things are going well; I have an HL2 TRX and I have set up several keyboard shortcuts to perform various functions - toggle VOX, toggle TUN, toggle XMIT, and bring up the RX and TX DSP Windows.

When I bring up the...

Hi all and thanks for the add. I have a quick query.

I've recently come to the software and am trying it out with my RSPDX and so far so good. So my query is is there an easy way of importing the Mem Panels from SDR Uno to Console's memories or do...

I like to use SAM in a number of cases and would like to know when the frequency is locked and what the offset is if locked or not. Thanks and enjoy, John.

I made some recordings around 2402 MHz with a bandwidth of 5MHz, when I use = audioread( ) in matlab, I only get a samplerate of 5MHz, while it should be atleast 10.
Is there any way I can manually set the samplerate or should I just record a bigger...

Is anyone using the SDR console as a poor man's spectrum analyzer along with an SDR RX and a noise source?
What are the best SW settings for this purpose?

73 de IZAFL

Bonjour;
J' utilise SDR Console V3.3 j' ai une déconnexion récurrente du logiciel . Je suis obligé de liquer sur start pour relancer SDR CONSOLE normal ?
merci
Richard

Hello Simon,

On my system the CPU and GPU performance graphs are not indicative of the System Performance tool.

See attached screenshot.

73 Hauke (VK5HW)

Hello,
I have a problem with the mouse in SDR Console, latest version, not beta version. I use Winsows 11 as the operating system.
The problem presents itself as follows:
I can move the mouse in the spectrum, but I can't set any filters, and I can't...

First post here, new user of SDR C so I hope that someone has an idea of how to resolve a tuning problem.

Elad FDM Duo as the main receiver (not Remote rcvr) on Com3. Works great with SDR Console but I have a query when using Dx Commander. I can...

Hi,
I'm using SDRConsole for the first time. Setup is W10 PC with SDRPlay RSPdx. All working fine with single band display.
When I select Multiband and, for example, Amateur CW, I get the full matrix on screen of the expected bands, but only one...

Hello
I'm having problems with my new windows 10 computer.
the sdr console frequency is fixed and cannot be changed, I can punch in new frequency but the spectrum stay's the same .
I can zoom in and tune in to stations on the frequency span that the...

I would like to read the set frequency on console via arduino.
In options, cat (serial port), I/O Test, I set the port and sent the frequency, arduino reads it correctly.
After I go to port selection I set the port as I/O Test, but nothing happens,...

Hello dear people,

I tried today to create a 1:1 copy from my stationary computer to my notebook in order to have exactly the same environment ready there.

Both devices run under exactly the same WIN10 22H2 and the current status and both devices...

The console is showing the spectrum with the odd spike but does not receive any signals on any frequency using sdr play or rtl sdr dongle.
there is audio noise and the squelch works in fact everything is ok but not receiving anything.
It worked ok...

Good afternoon,
I have a question about the program.
This program has API to link a guard book program like Swisslog.

The need is to be able to capture the keyer from Swisslog to be able to make the calls from the book on guard.
Could you be...

Hello there!

I'd like to ask something that I did not find in the documentation, neither was I able to find something concrete in the forums about it.
-> What do the percentage sliders for RX filter and TX filter exactly do (Radio section on the...

I am using the latest version of Console with an Airspy HF Discovery, bandwidth set at 912kHz. I would like to make IQ recordings of the entire MW band from 530kHz to 1710kHz. I tried using the MW settings in Favourites but the resulting recordings...

Hi all,

Is it possible to override the built-in 200 Hz high pass filter when using narrow FM? Although the majority of voice intelligibility is probably above this, I would very much prefer to adjust this and bring some of the lower frequencies...

Hello,
I want to record more than one audio stream within 500khz of bandwidth with only one SDR. I am trying to record NFM Local EMS and NFM Local LEO. Is this possible.
If I use data recording it has too much dead space and takes up to much...