It's all about the Software

I have a strange problem which is really bending my brain. I have an Adalm-Pluto RevB and LibreSDR Rev5 connected to the latest SDR-Radio release. Over time I upgraded both SDR's to v0.3.5 of the tezuka firmware. Both work well with SDR-Console and...

Issue: Just setup a new SMArt XTR SDR dongle to the laptop below attached to the default antenna. When trying to listen to local FM stations I see the patterns in the waterfall but all a get for audio is a chopping sound with muffled music or voices...

Where do you all want problems with audio and receiving posted? I am having issues with geting started with sdr-console due to audio/interfence issues... I am using a Nooelec SMArt XTR on a HP SPectre laptop and can't even get basic local FM...

Update Default cluster

spider.sdr-radio.com:8000
The DX Cluster node at spider.sdr-radio.com will close on April 1st,
2026. Please select another node.

Replace Default Satellite TLE links - None of them work anymore

I suggest:

Apologies if this has been reported before. The short of it is I'm monitoring 3 conventional channels at the same time, one SDR, 3 receivers inputting to 3 virtual audio cables. Trying to save this configuration into my favorites list. I've ensured...

--19-- Peace be with us.
Since yesterday, I have not been receiving a signal. The console starts up, the USB 820T dongle loads, but there is no signal. When I stop the device, the software freezes. I deleted the device drivers, reinstalled the...

This is probably not a supported problem but I post wondering if someone has any ideas.

So I want to use a 20 foot USB-C cable with PD (power delivery). So I have one cable on my computer that supplies both power and devices from the distant USB...

Hello,

I am using SDR Console V3.4 build 3871 on Windows 11.

When tuning signals on the narrow band portion of QO-100 I can click on a station with the mouse, but as soon as I use the mouse wheel to fine tune the frequency jumps to 9.999.999.949....

Hello.

When usinf Analyzer crop selection, BW is not correct so you get an error. If selected by hand, no problem.

SDRConsole_bug.jpg

Best regards.
ANgazu.

Hi,

I'm developing a device to remote control the console and I observed an anomally with the MD command using the Serial port (CAT) connection.

As the documentation say (

MD
Mode
Read: MD; returns the current mode.
Write MD ;
Note: the mode...

I have a problem, SDR Console freezes, mostly when I use the satellite function.
You can still hear the sound, but the interface freezes completely and there is no error message.
I have to close the program using the task manager.
I have already...

For my ic756pro I can click the waterfall or rf spectrum to tune, but it is not reliable, it will miss, and the logs say this when it happens:
SDR>Ext IC-756 Pro> Frequency 7.179.400, BLOCKED

I have confirmed this is the only omnirig piece of...

Using Limesdr RX and TX on AO100 in 3.4 console I often have to retry pressing the TX button before the Lime actually transmits. The button changes color every try but the lime only reacts like 50% of the time.

I run 3.4 on both W7 and W11 machines, same driver.

Limesdr is found correctly in device manager.

SDR console cannot find limesdr on the W11 machine.

The SDR console recognizes different USB cards, but controls them individually.
It's not possible to have a single PTT command on multiple radios connected to the software.
In my case I have 4 radios and amplifiers in separate boxes, and I can't...

Hi, Simon. I believe I've found a bug in SDRC's MIDI interface. Windows only allows one application to listen to a Midi controller. Which means that apps need to take into account that a controller might already be used by another app, and if so,...

Hin
I have a Win10 corei7-6700 (2016) laptop with pluto (latest firmware) used for QO100 only.

Console version: 3.4 April 21 25
SDRtelevision version: April 23 25
OBS version 31.0.3

Additionally to these programs I need a webserver (XAMPP),...

Hello Simon.

I'm transmitting with SDR Angel / Hack RF and I'm trying to decode with RTL/SDR Dongle + SDR Television.

I'm well able to see the constellation but I have Incorrect PAT checksum and impossible to decode any images.

Do you have any...

Hello.

I'm trying to run DATV Television app on two different PC but it doesn't start.
One PC is running Windows 10 and the other has Windows 11 and the Television app was installed at the same folder (C:Radio\SDR-Radio.com (V3)) of SDR Console on...

Solved: missing driver

Squelch does not work on AM, I listen to the AIR band and AM/ SSB sql level does not work. Any Ideas or is there a fix for this.

Hi,
I have an external radio Elecraft K3 and a SDR radio Perseus. It works fine until I change the band or the frequency. If I change it, the spectrum and waterfall stop working. It's just noise. To fix it, I have to turn the external radio off and...

SYMPTOMS
1. When SDR Console window remains minimized, the memory usage continuously increases. It can reach insane levels of memory usage until the application can stop responding or crashes.
2. Restoring the window causes very high disk activity...

Using Windows 10/11, the WINGET utility identifies the SDR Console (V3) version as Unknown .

>winget list SDR-Radio.com (V3)
Name Id Version Available Source
----------------------------------------------------------------
SDR-Radio.com (V3)...