It's all about the Software

In the Audio Spectrum display when selecting the oscilloscope view, the audio is still unsymmetrical for AM mode (see circle in screenshot). The display is no longer centered evenly above/below zero as it used to be and is on all other modes.

Also,...

If you turn off the receive dsp panel and you tune up or down with the tranceiver you will go outside the screen. (screen is not refreshed, tunning bar outside the screen)

Here's a video of the rig external radio bug

SDRPLAY has updated the SDRUNO software to version 1.42-0720 and the API to version 3.10. When I start SDRConsole it doesn't recognize the RSP2Pro (other SDR software without problems). Please find a screenshot and logfile attatched:

The new NR4 is great. However if one switches mode, say between LSB and SAM, undesired noise artifacts that sound like garbled water appear. Almost the same sound as not enough smoothing applied.

As a workaround to fix it, all one needs to do is...

When receiving on QO100 and synchronising the frequency to the beacon, the frequency of the Digital Decoder window is not compensated. Consequently the Digital Decoder can be way off frequency to the received frequency.

Has anyone else noticed...

First reported a year ago but not addressed yet...

Bug report:

When recording a stereo FM station using the video recorder, the recorded audio is mono from the left channel and not stereo. Could this please be fixed?

Thank you so much. Loving...

Hi,

Since I'm now running beta version 3.2 build 2645 I hope it is OK to report this long outstanding issue as a beta bug:

I use SDR console as spectrum display / waterfall to monitor the QO100 NB passband and monitor my transmissions.
I don't use...

Hi, Simon.

Thank you for the reply to my report in the groups.io list.

I asked the question because I saw something beneath the AM Squelch item in the Squelch panel. Whatever it is, it lights up when you mouse over it, which led me to think that...

I'm sure I'm missing a setting (I think)

When I set the display to show UTC Time, the Schedule shows local time

Is there a setting to make the Schedule also show UTC time?

Thanks.

Clicking on the top of any Console window brings up the two way arrow but instead of resizing it moves the window, the same procedure on the left, right and bottom edges behave as expected resizing the window. Not a show stopper but I seem to always...

Hello,
After updating my 2 pcs to W10 21H2 build 19044.1566 and W11 21H2 build 22000.527 both SDR-Console 3.1 and also 3.0.27 no longer run. I get various problem like frozen screen upon starting, sometimes audio but no spectrum, can´t select radio,...

I´m new to this forum because it´s the first time I have problems. I can´t really figure out how it started but this is how it is now:
I´m using Win 11 21H2 build 22000.675
and two times RSP1A. First the RSP1A´s couldn´t started. Seems I had some...

Hardware:-
Hermes Lite 2 with firmware 72.8
Software:-
Windows 7 Home 32 bit
SDR Console compiled on 2022-04-12
Symptom:-
Maybe after one or two transmissions, on going to transmit, Hermes Lite relays chatter continuously, no transmit output. On...

Bug? The long path seem to be anchored on the opposite side of the earth from the home location.

Test setup, RX888 at 30m with a narrowband 500Khz bandpass filter inline, also without the filter the problem is present.

This is the spectrum on wspr waterfall, when using the bw setting of 2, 4 and 8 there is some inter modulation from what it...

Hardware: Hermes Lite 2 with Windows 7 32 bit computer
Software: SDR Console version 3.1 build 2320
Issue: Both sides of a conversation only get recorded if in the *** Options -> Hermes Lite window -> Tx Options -> Mute Rx check box is left...

Software: SDR console ver 3.1 build 2320
Hardware: Hermes-Lite 2, 32 bit Windows 7 computer
Problem: After keying the voice keyer and then cancelling it, the scroll wheel no longer fine tunes the radio frequency. However, left mouse will step change...

I used SDRConsole to snip a 10 second portion of an I-Q file recorded by SpectraVue.

However, the snipped file does not playback in SpectraVue - an error window pops up Input file not valid . The new snipped file does playback in SDRConsole.

Whit

I'm a huge SDR-Console fan. I BCBDX which means listening around the top of the hour. Over time the clock on my recording doesn't track the real recorded time but drifts behind. I have a ten hour recording and it's almost a minute behind after that...

First, I love the SDR COnsole interface for my R-8600. I have noticed that the Noise Blanker (enabled) and NR filters (NR1 thru NR4) have no effect on R-8600 received signals.

Hi Forum,

i've noticed some weird behaviour with Receive or Transmit Pane undocked.

1. Frequency or Mode doesn't change when TX Pane is undocked:
Sync RX on Frequency and Sync RX on Mode are both activated.
Frequency doesn't change neither with...

Hello and a happy new year!

I am using the following setup:

Hermes Lite 2
Hardrock-50 amplifier
serial cable connection between TRX and PA

Until SDR Console V3.1, 64-bit, 2021-11-22_0623 automatic band switching of the Hardrock-50 worked...

SDRC v3.1 3AUG2021
WIN10

Greetings

Bug(s) :

1) 'Memories' entries set to BC-FM revert to Narrow FM after ~1 seconds after selection, a 2nd click sticks to BC-FM
2) filter width on display not reflecting BC-FM selection
3) BC-FM entry on Main...

Hi,
I'm using a funcube dongle pro+ I've bought a new desktop recently, I didn't have any problem
running SDR Consul but since the new PC the programme keeps locking up every miute?

I've checked up all updates but it keeps doing this?
Has anyone an...

SDR-Console has a weird bug with any AIRSPY HF+ (Discovery or dual port) that doesn't happen with SDR#.
I can't receive anything within a few MHz of 20MHz unless I reduce the sample rate to 384kHz.
At 768kHz when tuning within 2 or 3 MHz of 20MHz...