Calibration-value for dc-q stored incorrectly
Posted: Tue Nov 23, 2021 8:48 pm
The problem occurs in 3.1 Betas from September and November, using LimeSDR
After tx-calibration the calibration-values are shown correctly in the adv. options page, but the DC-Q-value is stored incorrectly. after reload it is reset to 0, which causes miscalibration at every startup. my workaround: write the correct value in the calibration-file manually and NEVER recalibrate in the console.
After tx-calibration the calibration-values are shown correctly in the adv. options page, but the DC-Q-value is stored incorrectly. after reload it is reset to 0, which causes miscalibration at every startup. my workaround: write the correct value in the calibration-file manually and NEVER recalibrate in the console.