It's all about the Software

Hi everyone, I'm having a strange situation with SDR Console. If I set the direct sampling rate to 192 kHz, when I open the SDR Console software, the sound card switches to 48 kHz and the microphone crackles, making it difficult to hear. The sound card is an ANTELOPE ZEN GO. I've tried other software like Thetis, Sun SDR, and Power SDR, and it works fine and maintains the sampling rate. I'm wondering if there's an option in the SDR Console software that lets me set the direct sampling rate to my liking... otherwise, what can I do?

I've uninstalled SDR Console and the sound card drivers, but nothing works.
I set it to 192 kHz, and SDR Console switches to 48 kHz!! And with this sampling rate, the microphone is difficult to hear. Thanks.

It sounds like you are trying to set the sound card to 192k and then connect to it with SDRConsole. I'd look for a way to set it with SDRConsole. The help files on https://www.sdr-radio.com/ might show you how. SDRConsole overrides sample rates that were set in front end interfaces to which it connects.

{^_^}

Hi, I've already tried virtual cables but it works for a while then when I reboot it sets the card to 48 khz and the audio comes out badly!!!