It's all about the Software

Hello,

I've bough a HL2 but I face issue with SDRConsole regarding the output power.
Basicaly i can't have more than 3W of output but I got 5W using Quisk.

I've tried to understand why and inspected network packet between my computer and my HL2...

May have power outages tonight, so my local servers may be down (Superstations1-4) while I power up the diesel generator and put everything back online. May have lots of static crashes due to lightning currently offshore as well, so 160m will be...

Odd behaviour with the OEO firmware.
Everything seems to be samplet wrong. If I set 3MHz sampling it seems close to working but is too much for my pluto on ethernet.
Using the standard 750KHz I used to is giving odd signals.
This only happens with...

Hi Simon,
I think this may have been requested before. Is there any chance to be able to produce a waterfall of a complete IQ recording? I use Data Analyser to check my recordings but that can take a long time to analyse several hours worth. I know...

Hi guys, I have an issue with V3.1, often it freezes on startup. I have 2 profiles, the Main for an RTL-SDR Blog V3 and a second profile for an SdrPlay RSPDX.
At any given time I only have one oif the above SDR's connected.
The installation has...

Hi Everyone,

Using SDR Console v3.1 build 2320. Having trouble getting automatic satellite pass recordings to work consistently.
Steps
Start radio
go to Satellites page and turn on Autoschedule and Tracker
screenshot.623.jpg
go to records tab...

Simon,

Currently the info box (while hovering) displays beam headings from the home station to the cursor position on the map. I am wondering can you add beam headings (selectable) from the cursor position TO the home station. This is very useful...

I have a really annoying problem with SDR-Console, AirSpy HF+ and Windows 11. It has to be some weird setting somewhere in Windows 11. Here is short description about behavior.

Everything works fine for a while, but if I reboot or disconnet...

Hi Simon.

Will v3.0.27 support the 64 MHz instantaneous bandwidth of the Rx888 Mk II?

If so, have you tried it? Any comments?

73 / Ingolf, SM6FHZ

I've been playing with the RX88 MK II I now have. As it stands the main window zoom feature is useless. It always expands around 16 MHz. (Where's 128 ksps or better user settable sample rate?) I can fool it by setting the nonexistent LO frequency to...

Dear Simon,
I would appreciate ON/OFF options for Dither and Random, as they are available for RX-888 (Receive > DSP > Radio).
SDR Console is my favourite SDR UI; thank you very much for your great work and effort!
Walter HB9AJG

I Have the mute function set for strong signals, however I do not believe it is working correctly or there is an operator error. I have the RSP1A and a Yaesu FT1000MP with the pandadpter board installed. When I transmit I get the huge signal and...

Hi Simon,

One of my equipment configurations in my shack is running my Airspy connected to a buffered IF tap on my FT890. The FT890 upconverts to a 70.455 MHz. This gives me multiple receivers and the benefit of the waterfall.

Because I upconvert,...

I manage to connect my radio via omnirig and display follows in external radio but RX SDR does not follow the frq of my TX

Hi,

Always something new:

Have noticed that when I am on a am station, and the AM button is depressed, if I move
to another frequency it seems to automatically go to SAM .

Why ? Is there perhaps a Default I have set inadvertently somewhere ?...

I see receiver Commradio CR-1a support on screenshots on the site, but cannot find it in the program. May support be discontinued?

Possible update in last 48 hours? Super Station #4 was getting the 10 second time out warning. Apparently W10 decided to change the status of the port it was listening on and blocked it via Windows Firewall. Re-enabled and refreshed, all is well in...

I use my SDR as both an enhanced panadaptor for my IC-7300 and as a second receiver. I don't want tracking enabled much of the time - I'm using the two receivers separately. I will watch the SDR waterfall, looking for something of potential...

Hi,

Might just be me, but in using the Radio Frequency box that comes up by pressing Home/Frequency
that allows the setting of Frequency and Span:

Again, it might be me, but it seems that the numbers you enter do not appear, always, where you have...

Hi!

Version 3.1 2365 using Windows 11 Intel 10700k NVidia 3070 has no effect when activating noise filters. This was also in the non-beta version 3.1.
Most other functions except Notch on as the filter bandwith, etc work nicely. I have used it on...

Hello,

Might it be possible to alter the Frequency box that comes up when pressing a number
such that it also allows the setting of Span ?

Like the box that appears in Home/Frequency which has both.

Thanks for considering.

Regards,
Bob

Special Points Requests

Shaded = For some time this parameter must be reset each time the program is opened. He didn't need it before.

Resolution = The same is true for the value of the chosen resolution, each time the program is opened, the value...

I have not been able to use the video recorder feature and the Start button is 'greyed out'. I've looked in the settings and I assume I don't have to enable it in the options. I am using the latest test version although I've not been able to use it...

Apologies if this has been asked before.

Using my HackRF One via Console 3.1 build 2320 just fine :D
Tried adding a RTL-SDR V.3, having first loaded the new driver with Zadig 2.6, but can’t start it because of this error:

API version don’t match...

Hi Simon,
Hi all,

I use v3.1 beta Build 2346 on my Dell Laptop running Win10, updated recently to functional update 21H1. Now Win10, Version 21H1 (Build 19043.1202).
After a couple of hours of operation SDR Console stops working. This was not...