It's all about the Software

If audio pops & clicks are heard it may be necessary to re-enter the setting in Options-Audio-Buffering by changing it and/or restoring it to it's original setting. That seemed to correct a serious case of audio popping that occurred after...

hello Simon
i have a few plutos here (modding them for others) ... when i start one pluto (my main unit) that has no ppm correction or start a different one (that need a correction of as example) -0.2ppm i have to correct the ppm value each time by...

Hi everybody,
is there any alternative way to connect
to the Server other than SDR Console itself?
I mean, at home I have no windows pcs,
can I connect from android or ios or mac, trough
some apps or web interface?
Thanks, Antonio.

I have seen a request coming from Slawek DL6SH which has been posted to the old reflector. I'm too playing around with MAP65, so I'm posting here on his and my behalf.

MAP65 (a K1JT's application for JT65/EME) can receive I/Q stream both via a...

Hi Simon

I'm using HL2 for the first time with low power output from HL2 RF1 to drive a transverter. I'm seeing some pretty weird behaviour.

So as a memory jogger, RF2 on the HL2 is actually labelled Ant and is the onboard 5W PA output (via...

I installed SDR Console and most of the features appear to work except that I cannot adjust the bandwidth on FM broadcast channel and so get a very poor quality of reception. I installed the latest package for 64bit. I also have SDR# installed, and...

It appears the Waterfall resolution is reset to default rather than that selected in the resolution menu after making changes to Satelllite or Favourite entries.
The example I can give is that I have selected x8 resolution ( Menu : View -...

Hi all,

Is there a way to activate/deactivate the Dither and Random functions for a HERMES board?
For the RX888 there are tick boxes, but for ANAN/HERMES I have not found anything comparable.
Maybe I have missed it?
If not, I guess I will add this...

I use PLUTO with SDR Console V3.0.38 as a PAN adapter for my 2 meter contests. There is always a DC in ther middle of the screen and also mirror signals are not suprest as I would expect.
for my Funcube dongle I have a special tool , where I can...

Having returned to using the Elad FDM-DUO more out of curiosity than need, I find that the menu option to reduce Visual Gain on SDR-Console is missing.
The Visual Gain features I used to allow me to control the S-meter reading, which on 50MHz sits...

I was on HF running FT8 and was noticing people struggle to copy me even when my signal was strong so I wanted to set up a monitor on my signals. At first I tried just running an AFEDRI with no antenna but I became convinced that the ugly signal was...

I would like to operate my SDR from the comfort of my armchair using a second laptop computer and thought I could use the remote server feature for this. I tried the streaming option but I'd like to do bandscans on multiple bands and streaming...

The console is great and my favorite SDR software. I have a few questions,

Question 1
LimeSDR, set RX Ant=NONE: There are 3 spikes on the spectrum: 415.314MHz, 435.000MHz, and 454.686MHz. It looks like 435.000MHz is like a DC spike. The other two...

Hello my name is Sascha!

I have 2 questions about sdr-radio software.

1. Is it possible to choose soundcard line in or mic for receiving vlf signals directly via soundcard?
2. When I use a upconverter it would be nice to configure the software to...

Hi simon,

I have a problem with the 3.0.28 console and my FDMS2.

When I change the bandwidth, my audio recording and my signal disappear

I've take 3 screenshot of Adobe audio and Console.

LB : 1.536MHZ = OK
LB : 3.072 MHz = X
LB : 6.144 MHz = X...

Hi all,

Seems a nice site with lots of candy for the SBC adepts. I can see several models that could work nice with the Console. The prices seem affordable.

73' Ron

If i have two virtual receivers with identical settings, then isnt it possible that anything both of them receive could be phase-inverted and thus canceled
when it comes to wideband noise the blanker is satisfactory to most, but since we have...

Hi,
Thanks for a great s/w tool, I have been able to get tx as well as rx to QO-100 working and learned a lot along the way.

My rx set up is:
pluto -> 1m patch lead ->bias T -> 25m satellite coax -> sat finder -> 1m patch lead -> 4 channel Octagon...

Trying to get FT8 going with my HL2 SDR (not external radio) but for some reason not having total success. I did at some point have WJST-X controlling SDRC frequency for receive by selecting band setting in WJST-X but somehow I even managed to mess...

I hear the intended signal clearly plus many other signals that are dozens of Khz away, well outside the passband of my receive filter.

I have a dipole, so most signals are not very strong or overwhelming.

Frequency: any
Mode: any, but effect...

I'm currently using my MK2 on an I9 desktop PC but would like to take it away on hols in September so I'm going to need a new laptop. What CPU type/speed/spec should I be looking at to run it at a reasonable bandwidth? Not necessarily 35MHz but...

I just realized I can hear out-of-band signals even when the receiver is muted, like if I was hearing a swath of IF spectrum all the time.

Normally, as Automatic Schedule switches from satellite to satellite, the frequency in the waterfall and the spectrum changes to the upcoming satellite frequency. It works fine except for the first satellite. For the first satellite, the frequency...

Cw monitoring in SDR console, other than going to a third party for the cw software decoding, Simon , the question arises , have you got some codeing on an old hard drive left over from the HRD days that you could plug into SDR console ?. Yep and I...

So i admit i dont really know how sdrs or sdr software works but there is data in a “form” that sdrconsole then decodes and renders into visible and audible forms.
That original stream of bits proper prior to any FFT processing is what neural...