It's all about the Software

SO2R implementation with SDR Console:

- two Identities for two independent SDRs such as two ANAN or Hermes Lite etc. as Radio 1 and Radio 2.
- SDR Console would connect the serial port of virtual serial cable back to logging program (N1MM etc.) -...

I use these when monitoring, but if I choose to scroll through the spectrum using the ‘2 arrows’ on the left or right at the bottom, and then want to use a keyboard shortcut, they won’t work.

I then have to stop and start the software to make them...

I know this is our Elad SW2 software, so excuse me, Simon is on the list to get one within a few weeks so that Console can support the DCM as we are calling it. But here it is on test in the USA, got some great signals from 30miles away using a...

Gentlemen,
Just getting back in to satellites after a couple of years absence. Hasn't the program changed in that time. One feature I was waiting for that has been added is the auto scheduling of satellites.
The feature is working fine as I want to...

I see I won't be getting much help. That's a shame, as it was my favorite sdr software but I'm not going to reformat a computer to use it.

Hi Simon and others,
The satellite scheduling works well and I would like to use it 24/7 even when I am away for a few days.
What I find lacking to achieve this is the ability to change antennas for the different satellites.
I have three antennas,...

Hi all,
I recently took a trip to a more remote part of Virginia in the USA to make some IQ recordings to potentially capture some meteor scatter on the FM broadcast band. For the most part, mission accomplished! I used the Airspy v2 and SDR...

Would be great to add support for Signal Hound Analyzers, to be used as an receiver.
Depending on model it can go up to 20GHz.

Hi,

I'm not sure I have this right.
Will blame it on old age now if I am, as usual, a bit confused.

A long time back I think there were some Posts about the development
of:
additional digital modes right from the program

and of a stand-alone...

Hello,

I tried to put my RSP1A into the sdr-serverworld.
I see my RSP1A in the list SDRSpace.com with a green tick.
Everything looks fine in my servermanager.
The service is runng and the on-air status is ok.

But if I try to connect my SDR via...

Is it me or is the banner looking a little outdated?
{o.o}

Hi Simon,

When adding/edit Favourites they are not automaticly added/changed in the FFT (as a marker).
To activate every change one have to go to View, Markers, Marker Config, uncheck Fav and check Fav again. A bit cumbersome that way.

Is it...

Hi friends,

Is possible to decode DMR / there are some tutorial about this ?

I´m new here / with SDR Console, sorry if this question was already answered (i have made a search in this forum but with out results about DMR )

TKS !

73's

marcelo -...

Hi,

I've tried for about an hour now. Really.
Admit I'm not as sharp as I (probably) once was, but talk about something being convoluted...

All I need, please is a simple, basic, link that when I click on it will install the new V 0.28

I don't...

Could you please add support for the 0-38.4MHz frequency range? Thanks.

I know this request cropped up on a broadcast DX forum but the original poster hasn't mentioned it here so I will. Can the RDS PS display show the characters in their original positions and maybe indicate the 8 character locations so a partial...

Hi Simon -
Playing with some more SDR radios...
My preferred platform is your SDR Console V3.1 for my Elad FM-DUO and HL2. Anan coming next...my poor 101D is quickly taking a backseat to wanting your GUI - hence the Anan....

I have in the mean...

SDRuno 1.40.1 installs their V3.07 API. SDR Console is looking for V3.06. It there a timeline for SDR Console to be able to use the V3.07 API?

Would it be possible to add markers (favourites, etc) at the top of the Analyser window? Perhaps as an optional sub-window at the top or something?

Good for analysing for beacons etc.

Thanks !

I have mentioned this request in general conversation, but don't remember putting it in the right place, so I shall do so now that 3.1 is released...

Currently, double-clicking an entry in the RDS log brings up an editor window with possible...

Hello Simon,

With V3.1, the stability of the QO-100 Beacon Synchronization seems to be noticeably lower than it has been with V3.0.28. While V3.0.28 (and before) showed a sync stability in the order of 1-2Hz, the stabilization is jumping around by...

Hello Simon
with the PLUS button in receiver pane you can add another receiver so far so good ... but the X in each of the receivers do only close and mute it but the window is still there ... either use the x in each receiver box to also delete it...

I would like to have QO-100 beacon sync without secondary windows and clicks.

My desired solution:
- I tune (USB usually) until I hear the beacon
- I press a keyboard shortcut (whatever that may be)
- The program syncs RX with the beacon
- The...

Hi Simon,

Could this be added? This could be very useful.
Right click on the call sign will bring up a submenu so a quick search can be done on QRZ or QRZCQ page. Lookup can be done by configuring the api key.
right click.jpg

Please also...

If audio pops & clicks are heard it may be necessary to re-enter the setting in Options-Audio-Buffering by changing it and/or restoring it to it's original setting. That seemed to correct a serious case of audio popping that occurred after...