It's all about the Software

Hello,

i am using the favourites list windows very often . I also have a long list of favourites which i am going thru daily ( intruder monitoring ) . It would be superb if i could use the keyboard ( enter ) to activate the current line. I can...

This is the scenario: I'm using an IC705 for transmit/receive on Es'Hail-2. I have a Lime SDR attached as an external radio to enable me to monitor my transmit signal via the satellite as required. The Lime tracks the Icom OK.

However, my transmit...

Helllo, recently tried out the MIDI functionality which is really nice. Thanks for that. I have found that if I make a slider for volume control that has a range of 0 to 127, the software detects it properly and sets the values in the midi config...

I use a home built MIDI controller and it really makes my life so easy when working contacts on QO-100 with the Pluto and SSB contacts on the Hermes-Lite2 while sitting back and talking. It will be so awesome to have RIT on the MIDI controller then...

Hi I have purchased a new Aaronia SPECTRAN V6 ECO 150XA-6. The latest SDR Console said can support SPECTRAN V6 (but not sure if is only V6 or both the V6 and V6 ECO) by SDK, I tried that on the V6 ECO, looks like it can see the hardware and detected...

When I try to connect to bladeRF v2 in SDR console please wait appear and then I see crush report.

crash report:

Hello, struggling on connecting Prosistel D controller to show antenna azimuth on Simons map. The controller is connected to PC via USB and creates port. The rest is unclear how to connect to the map. Have been using Yaesu rotator successfully...

Hi, first of all,sorry didnt read the whole forum!
Is it possible to implement Flrig for controlling external radio.
Im switching from Port cloning and using hrd and omnirig to flrig.
But now not possible to change frequency by clicking waterfall...

Had a bad case of Sciurus carolinensis or Tamiasciurus hudsonicus!
Grey squirrel or Red squirrel decided to chew on the insulation, and wires of the antenna about 4' from the 9:1 unun. Both ends were stripped about 2 so I wrapped the two back...

Hi
I hope you forgive my ignorance.
To use SDR console on a Windows PC to control a raspberry pi 4 with 1 RTL-sdr dongle, what do I need to install in the raspberry (drivers, software, etc.) ?
Many thanks in advance
Regards

Hi,

On SDR-Console V 3.3 when I try to select Hermes Lite 2 in the Search option, I am given the below option

-> Default
-> Extended
-> Fixed Address

But when I select the option of PlutoSDR in the search option,I do not find any of the options...

SDR Console has been working flawlessly until today when a Windows update installed. Now SDR Console will run only a minute or two then freezes, accompanied by the disconnect sound ding. I can click on the stop button, wait a minute or so, then...

Hello,
I am using sdrconsole for the QO100 operation successfully.
I have linked my external radio and the SDR console shares the frequency information on 70cm to my rig.
On the SDR display I see the 10.489 frequency as it is used on the satellite....

So when I reboot the PC that the server is installed on, the system status comes up on-air-services unknown
To get things to work I have to stop the service in the server manager and then restart, and then everything works fine.
Now if I reboot...

zoom function with external radio doesn't work in the right way, the signal move from the tuned frequency. changing zoom an offset on the sdr tuning about 1 kHz is applied.

In addition moving radio vfo change the zoom on the spectrum.

Tracking in...

So gentlemen,
I can not find an answer in FAQ's on this issue, so I would like to ask the many users with far more knowledgeable and experience with SDR Console a seemingly simple question.
With both a CW Transmit mode and the ability to generate...

I have been figuratively banging my head against the wall trying to find software that lets my Hack RF One transmit. This SDR console looks promising but I can't seem to get the Transmit option to work. Receive works fine.

I am really hoping...

I'm observing SDRC crashing when using 8 MHz bandwidth. This has been a long running problem I've never reported because I seldom use more than 2 MHz of bandwidth and the crashing at 8 MHz of bandwidth is at random times.

Though there may be a...

I'm an old timer of 45 years on amateur radio so this stuff is new to me. I would like to know what I need to get my Kenwood TS-59SG and HackRF One SDR to work to decode FT8 and display the FT8 also what other software is needed to work FT8 on the...

I use SDRConsole for preferance with my SDRPlay DX but have recently bought the remarkable BELKA all mode RX for mobile SWLing. It provides an IQ output for use via a computer sound card and together with a laptop, would be very useable. For...

Can somebody kindly provide me with detailed instructions on how to allow SDR Console to recognize a B210. Please assume that all what is available on this site has been done without success. Downloading drivers from ettus is part of it.
Thanks...

Something is wrong with Super Station #1, all signals are down by +20dB. Will have to walk out and check the antenna. We had horrendous winds for two days, and may be laying of ground or in pieces. Was too dark to investigate when I discovered it...

Just noticed this error(?). When selecting Pre-Amp on/off a window pops up saying the AGC must be off? Pre-amp works just fine on or off with AGC on.
Just uploaded the latest, V3.3 build 3236 on a W10 laptop
See screenshot

73 Kriss KA1GJU

When CW mode active, a means to park the peak of the CW signal in the middle of the filter window, like many HF transceiver's can do. I think it's essentially a search for peak signal strength +/- from the current VFO.

Also the ability to choose CW...

Hi,
I have Sdr-console on my pc.
I would like to copy all settings/data (memories etc) to my laptop.
Purpose is to take my laptop, radio, antennas when I am camping to 'listen around'.
Is that possible?
How can I do that?
Thanks in advance.
Paul