It's all about the Software

I've been playing with the RX88 MK II I now have. As it stands the main window zoom feature is useless. It always expands around 16 MHz. (Where's 128 ksps or better user settable sample rate?) I can fool it by setting the nonexistent LO frequency to...

Dear Simon,
I would appreciate ON/OFF options for Dither and Random, as they are available for RX-888 (Receive > DSP > Radio).
SDR Console is my favourite SDR UI; thank you very much for your great work and effort!
Walter HB9AJG

I Have the mute function set for strong signals, however I do not believe it is working correctly or there is an operator error. I have the RSP1A and a Yaesu FT1000MP with the pandadpter board installed. When I transmit I get the huge signal and...

Hi Simon,

One of my equipment configurations in my shack is running my Airspy connected to a buffered IF tap on my FT890. The FT890 upconverts to a 70.455 MHz. This gives me multiple receivers and the benefit of the waterfall.

Because I upconvert,...

I manage to connect my radio via omnirig and display follows in external radio but RX SDR does not follow the frq of my TX

Hi,

Always something new:

Have noticed that when I am on a am station, and the AM button is depressed, if I move
to another frequency it seems to automatically go to SAM .

Why ? Is there perhaps a Default I have set inadvertently somewhere ?...

I see receiver Commradio CR-1a support on screenshots on the site, but cannot find it in the program. May support be discontinued?

Possible update in last 48 hours? Super Station #4 was getting the 10 second time out warning. Apparently W10 decided to change the status of the port it was listening on and blocked it via Windows Firewall. Re-enabled and refreshed, all is well in...

I use my SDR as both an enhanced panadaptor for my IC-7300 and as a second receiver. I don't want tracking enabled much of the time - I'm using the two receivers separately. I will watch the SDR waterfall, looking for something of potential...

Hi,

Might just be me, but in using the Radio Frequency box that comes up by pressing Home/Frequency
that allows the setting of Frequency and Span:

Again, it might be me, but it seems that the numbers you enter do not appear, always, where you have...

Hi!

Version 3.1 2365 using Windows 11 Intel 10700k NVidia 3070 has no effect when activating noise filters. This was also in the non-beta version 3.1.
Most other functions except Notch on as the filter bandwith, etc work nicely. I have used it on...

Hello,

Might it be possible to alter the Frequency box that comes up when pressing a number
such that it also allows the setting of Span ?

Like the box that appears in Home/Frequency which has both.

Thanks for considering.

Regards,
Bob

Special Points Requests

Shaded = For some time this parameter must be reset each time the program is opened. He didn't need it before.

Resolution = The same is true for the value of the chosen resolution, each time the program is opened, the value...

I have not been able to use the video recorder feature and the Start button is 'greyed out'. I've looked in the settings and I assume I don't have to enable it in the options. I am using the latest test version although I've not been able to use it...

Apologies if this has been asked before.

Using my HackRF One via Console 3.1 build 2320 just fine :D
Tried adding a RTL-SDR V.3, having first loaded the new driver with Zadig 2.6, but can’t start it because of this error:

API version don’t match...

Hi Simon,
Hi all,

I use v3.1 beta Build 2346 on my Dell Laptop running Win10, updated recently to functional update 21H1. Now Win10, Version 21H1 (Build 19043.1202).
After a couple of hours of operation SDR Console stops working. This was not...

Hello,

This really isn't important.
It's just asking for someone to educate me a bit,
and my desire to learn a bit more on File structures, etc.

I have been using the latest version, 3.1 with
CSVUserList Browser talking to it.
They really work...

Hi wonder if anyone can help.
I have HRD set to com3 and rig control is good. I set 3rd party rig control to com19 using virtual ports com19/20.
I then set SDRradio omnirig to connect to com20 and set track radio. SDR radio in the external radio...

Greetings to all, and sorry if I'm stupid .. I have this problem, with the use of the external radio module ( SDR console )
I use a Yaesu ft1000mp mark 5 Field and connecting the radio with SDRPlay or an Airspy hf, the connection between SDR console...

Hello All,
i hope in an help.
I am using SDR Console v. 3.1 Build 2320,
I have made some settings in it and now whe i try to go on TX it seems it won't to go.
I have tried with bot Tune and Tone but i do not see my signal on the waterfall.
Yes the...

Hello Forum,

I would like to know if it is worth buying this type of receiver (to complement my SDRPlay) and what are the strong and weak points for general HF - VHF use ?
Does it work well with SDR-Console? Any limitations?

Many thank for any...

Hello, friends...

I learned yesterday that one of my favorite DX tools (quite literally named DX Toolbox) has CAT commands implemented using the Kenwood TS2000 protocol and therefore can tune your receiver using SDR Console. It is not immediately...

Hello,

Running vers. 3.1 build 2320 which I assume is the very latest. True ?

I am just getting started again, so may have this wrong.
I seem to remember reading recently that Console now can show the various bands (limits) graphically superposed...

Hello,
I'm using SDRConsole with Airspy Mini, conected to IF of my Yaesu FT-2000 transceiver as external receiver using OmniRig. Everything is working fine, except Waterfall and frequency bar are moving into oposite direction as I manually tune my...

Displaying Markers, Memories and DX Cluster spots in the spectrum display is a great feature but could be so much better if clicking anywhere in the line of text of the Marker/Memory or Spot took you straight to that frequency.

Or if it's too...