Search found 769 matches
- Fri May 10, 2024 3:54 pm
- Forum: Server Status
- Topic: Isn't this just grand?
- Replies: 3
- Views: 84
Re: Isn't this just grand?
This QRM appeared within the last few days on all my servers at the QTH, worst is on Super Station #2, which was my best system. :evil: Starts at 1800kHz to about 2900kHz and again at 4050kHz to 4750kHz. Heading out with the Youloop and AirspyHF+ to track it down or at least get a bearing on it now...
- Tue Apr 30, 2024 3:32 pm
- Forum: Bugs
- Topic: Blade RF connection issues
- Replies: 1
- Views: 114
Re: Blade RF connection issues
When I try to connect to bladeRF v2 in SDR console "please wait" appear and then I see crush report. crash report: https://drive.google.com/file/d/1Roat-8Uvj-mnEBoZBzdnKfU82ETjKl33/view?usp=sharing See here. Close the CLI before attempting to access with SDRC? https://sdr-radio.groups.io/...
- Mon Apr 15, 2024 2:51 pm
- Forum: General
- Topic: SDR console and RTL dongle
- Replies: 6
- Views: 657
Re: SDR console and RTL dongle
Hi Thanks again. The purpose is to be able to receive without being physically close to the "receiver"/raspberry, and the connection to the antenna, that is, the receiver/raspberry and connection to the antenna in a fixed place and the reception/listening (tablet or laptop) anywhere, prov...
- Mon Apr 15, 2024 2:41 pm
- Forum: Forums
- Topic: SDR Console V3.3 with Log4OM2 !!!
- Replies: 3
- Views: 378
Re: SDR Console V3.3 with Log4OM2 !!!
I am trying to interface the SDR Console V3.3 with Log4OM2. I am not succeeding to get the VFO & mode information to the Log4OM2 application. Any suggestions as to how to get this fixed? Log4OM works very well with SDRC. Just use virtual serial port pair to connect Log4OM to SDRC: https://www.s...
- Sun Apr 14, 2024 7:33 pm
- Forum: General
- Topic: SDR console and RTL dongle
- Replies: 6
- Views: 657
Re: SDR console and RTL dongle
Hi Thanks for your response. My question results from the following: I saw a video of the radioberry installation on a Raspberry pi which was controlled on a laptop (Win) by the sdr console. The radioberry, in my case, is too much as I don't intend to transmit, just receive (HF) so I remembered to ...
- Sat Apr 13, 2024 10:47 pm
- Forum: General
- Topic: SDR console and RTL dongle
- Replies: 6
- Views: 657
Re: SDR console and RTL dongle
Hi I hope you forgive my ignorance. To use SDR console on a Windows PC to control a raspberry pi 4 with 1 RTL-sdr dongle, what do I need to install in the raspberry (drivers, software, etc.) ? Many thanks in advance Regards You can run RTL-SDR directly (locally) by simply adding it as a radio to SD...
- Thu Apr 04, 2024 10:02 pm
- Forum: Forums
- Topic: SDRconsole frequency data export
- Replies: 3
- Views: 507
Re: SDRconsole frequency data export
But for the RX I have the RSP2pro which is driven by the sdrconsole and the sdrconsole is set to the correct frequency using the offset. Now how can I get this frequency out of this connection?? My log programm does not offer an offset, if I connect to the omnirig interface(ext radio frequency ) it...
- Thu Apr 04, 2024 7:35 pm
- Forum: Forums
- Topic: SDRconsole frequency data export
- Replies: 3
- Views: 507
Re: SDRconsole frequency data export
Hello, I am using sdrconsole for the QO100 operation successfully. I have linked my external radio and the SDR console shares the frequency information on 70cm to my rig. On the SDR display I see the 10.489 frequency as it is used on the satellite. How can I read this frequency on my logbook? Is th...
- Thu Mar 28, 2024 9:58 am
- Forum: General
- Topic: CW on AO-100 (Help please)
- Replies: 11
- Views: 1962
Re: CW on AO-100 (Help please)
Windows has a new apparently not often used interface that is their answer to ASIO. ASIO is also limited by your sound card or equivalent. They all have a minimum buffer size. For ASIO itself the minimum is 64 samples (at 48ksps). {^_^} Joanne, maybe I missed the point, but what actually is the new...
- Wed Mar 27, 2024 10:12 am
- Forum: General
- Topic: CW on AO-100 (Help please)
- Replies: 11
- Views: 1962
Re: CW on AO-100 (Help please)
You know, I thought CW would have been easier! ANyway, thanks for the info, help and pointing me in the right direction. Very useful. 73s and Gud DX Yes, I thought the same as you when I first came to this, but then it soon dawned that where any digital system is concerned, then straight away you a...