Will SDR-C work with the Proficio (https://www.multus-sdr.com/index.php?rt ... path=79_81) SDR Transceiver?
73,
Robert
Search found 10 matches
- Thu Sep 07, 2023 6:13 am
- Forum: Other
- Topic: Proficio SDR or Multus SDR
- Replies: 1
- Views: 797
- Thu Sep 07, 2023 5:52 am
- Forum: General
- Topic: Keep Window Docking Status
- Replies: 4
- Views: 1096
Re: Keep Window Docking Status
Leon, Sorry for the late reply. I haven't been on this forum for some time. Anyway, I built my HL-2 together with a 20W amplifier and 7" touchscreen into a nice enclosure from Takachi. I used a Terryza "PC on a stick" to run it all in Win10Pro. Almost nothing else runs on the machine ...
- Thu Sep 07, 2023 5:37 am
- Forum: General Radio Topics
- Topic: New RFI - 24khz spacing on 80m
- Replies: 3
- Views: 2845
Re: New RFI - 24khz spacing on 80m
Kriss, Thanks for the input. It's very strange because mid February this year, it suddenly "went away". Then, about 3 weeks later it came back. I decided I would create a little written blurb about it including some pictures and an explanation that this interference was causing problems wi...
- Wed Nov 23, 2022 11:20 pm
- Forum: General Radio Topics
- Topic: New RFI - 24khz spacing on 80m
- Replies: 3
- Views: 2845
New RFI - 24khz spacing on 80m
Hi all, Wondering if anyone has seen anything like this before and, if so, what is the likely culprit. I was away for two weeks, came home and turned on the radio to find this wonderful new noise all across 80/75m with approximately 24khz spacing between signals. I'm using a Hermes Lite 2, powered b...
- Mon Sep 20, 2021 9:57 pm
- Forum: General
- Topic: AF Gain midi control won't go to "0"
- Replies: 2
- Views: 456
Re: AF Gain midi control won't go to "0"
My MIDI settings are correct; however, I have found that by using the "mute" switch on the digital pot, connected to NOT connected to a simple P-channel MosFET soft-latch switch I built (which controls the ON/OFF function of an audio output from the PC to a small 5w AF amplifier), rather t...
- Sun Sep 12, 2021 11:44 pm
- Forum: General
- Topic: AF Gain midi control won't go to "0"
- Replies: 2
- Views: 456
AF Gain midi control won't go to "0"
I have made an Arduino Micro-based midi controller for my HL2 running v. 3.0.24 SDR-C. It works very well; however, I don't seem to be able to get the pot to ever set to the AF Gain to "0". At it's minimum, the pot will only set the AF Gain down to "1" as indicated on the RX Pane...
- Tue Aug 31, 2021 4:20 am
- Forum: General
- Topic: Scale - Low - High - Centre - Zoom Controls
- Replies: 1
- Views: 228
Scale - Low - High - Centre - Zoom Controls
Hi alL, Kindly disregard my previous question re hiding/showing these controls. My ancient brain had a f**t and well, you may know what happened then. I finally cottoned onto the control....
DUH.
Thanks and 73,
Robert
VE7ZN
DUH.
Thanks and 73,
Robert
VE7ZN
- Tue Aug 31, 2021 4:16 am
- Forum: General
- Topic: Scale - Low - High - Centre - Zoom Controls
- Replies: 1
- Views: 228
Scale - Low - High - Centre - Zoom Controls
I know I did this before but for the life of me, I cannot remember how I did it. I am trying to HIDE the above controls which "appear" whenever one moves the mouse across the Panadapter window. There was a setting somewhere which allowed me to either show these controls or hide them but I ...
- Tue Feb 16, 2021 11:50 pm
- Forum: General
- Topic: Keep Window Docking Status
- Replies: 4
- Views: 1096
Re: Keep Window Docking Status
Thanks for the reply. I have 6 screenshots. 1) Initially, nothing is docked - with a 5" or 7" screen this gives maximum panadapter/waterfall viewing and is my default. 2) KEY R pressed on keyboard, brings up the RX DSP panel. (pic shows it docked after I selected "Docking" from t...
- Mon Feb 15, 2021 7:17 pm
- Forum: General
- Topic: Keep Window Docking Status
- Replies: 4
- Views: 1096
Keep Window Docking Status
New user, so be gentle... So far, things are going well; I have an HL2 TRX and I have set up several keyboard shortcuts to perform various functions - toggle VOX, toggle TUN, toggle XMIT, and bring up the RX and TX DSP Windows. When I bring up the DSP and Favourites windows, they default to "Fl...