It's all about the Software

Hi!

the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far too early.


Best !

I am runnin the RX888 from a USB 3.0 Hub, with channel knobs. Ocasionally it doeas not mount and I toggle the mount then. (Same on HSPDR). Please not i have opened the back of the device and blowing in air. If you dont ventilate, the device gets to HOT ! With cooling it runs at all frequencies stable.

I had a similar issue. My workaround on windows 11 with ASIO sound was to feed the sound into a virtual device from Voicemeter Banana. Within voicemeter banana then forwarding the virtual channel to a real sound oput put. Even though this seems to occupy more steps, the clicking was gone! However I ...

I would like to report that sound on the following configuration doeas not work properly. The issue seems to be a decoding, clipping issue as the sound is heavily distoreted under certain circumstance. Configuration: Windows 11, ASIO sound output (Arturia Minifuse 44khz or 48 khz), either direct but...

Hi! Version 3.1 2365 using Windows 11 Intel 10700k NVidia 3070 has no effect when activating noise filters. This was also in the non-beta version 3.1. Most other functions except "Notch on" as the filter bandwith, etc work nicely. I have used it on SDRPlay RSP1a as well as a NooElec RTLSDR...