It's all about the Software

Thanks Nick!
I'm sure it will be on the todo list.
Regards

Data Analyser works perfectly on the 1st analysis of each session. But moving on to a new project results in an image which appears “noisy” and overlaid with hash. In order to get a clear image it’s necessary to close the Analyser window and re-open it from the main SDRC window. The sequence of atta...

Try updating to 3.0.27. That cured it for me. Check the release notes. viewtopic.php?p=4485#p4485

Now we're in Summer time I'm seeing a discrepancy (when replaying recorded files) in the time stamp on the waterfall, which is showing correctly as UTC, and the time shown in the the bottom left box of the waterfall and in playback navigator. Both of these are showing DST. See screenshot. In waterfa...

Jaguar has a steep learning curve and requires lots of practice (at least for me!). But if you are an avid AMdx'er keep at it and the programme will reveal its depth. I started with it in late 2019 but NDB's and Pskov took over for the remainder of that season and most of the 2020/21 NDB season. In ...

It's not a dead project - here's a current link to Jaguar website http://jaguars.kapsi.fi/ Now on v6 with v7 about to be released. You can download here http://jaguars.kapsi.fi//download//JAGUAR_V6.0.zip This will run in the Lite mode which has most of the features. I'm in full agreement with Simon'...

Hi PD3LK Noise blanker off; notch off; In my original post I indicated that all had been working fine for many months until a Windows update. This is not a settings issue in SDRC. Here is a screenshot running just fine with 3 decoders using Virtual Audio Cable and not VB-Cable which is what VoiceMee...

Thank you for your suggestion, PD3LK. I have found that Windows Settings page and all are switched on. A few days ago i decided to switch to VAC and that appears to work well at the moment. So I still haven't definitively solved the issue but at least have what appears to be a working solution. Mayb...

Until about 2 weeks ago I had been using the HF+ Discovery, SDRConsole driving 3 receivers on 518, 490 and 486 through VB-Audio Cables into 3 instances of YaND. All worked very well and my only bother was qrm on 490. And then it all went bad……. Even strong signals were decoding as gibberish with the...

Thanks for the reply, Jim. I had ticked the Lock Frequency box.

I've just had another look. I now understand that you can tune the receiver and provided you don't centre it or change the visible span then all remains as set in the recorder.