It's all about the Software

Sorry all, but I still am clueless in what the solution should be. Start with the dish pointed to "some satellite" at 31,5 West, which actually carries a telemetry beacon. LNB is RHCP no matter if powered with 12 or 18 volt. I do the math and subtract the LO of the LNB from the beacon sign...

So, If you have a LNB with a LO above the received frequency then: * What is the LO frequency? * What is the frequency you are tuned to? * What is the Converter definition? I expect this should be an Upconverter? I have connected (by bias-t) an LNB for the 19.7 to 20.2 GHz range, which has it's LO ...

Hi, I am wondering how SDR Console (v 3.3 ) handles the downconverter settings for by example LNB use, when the LO frequency is higher as the RX frequency. Ben I am not 100% sure, but is it not the "Invert Spectrum" option you need to enable in the "Definitions" options when LO ...

Hi, I am wondering how SDR Console (v 3.3 ) handles the downconverter settings for by example LNB use, when the LO frequency is higher as the RX frequency. I have connected (by bias-t) an LNB for the 19.7 to 20.2 GHz range, which has it's LO at 21.2 GHz. How can I tell SDR Console it's 'inversed' ? ...

Hi,

what would be the costs for the forum to run one year without advertizing ? Somehow my page has more advertizing as forum topic space.


73'
Ben

Hi, SDRConsole 3.1 build 2575 I did run the analiser on a large recording from the 70 cm satellite band (18 hours recording) all works very nice and smooth. played back some signals from the analiser view with the "play" function and decoded some CW signals, some SSTV and so on. Decided to...

Hi, Simon, today I realised I was some releases behind and I noted the 3.1 build 2470 release notes showing the waterfall as playback option :-) Really really nice for me to play with, the possibility to choose a signal on the waterfall, for which you can set your resolution in lines per second make...

Hi, Would it be possible to have the waterfall saving one line every xx seconds to a jpg / bmp file ? I do record 6 - 12 - 24 hours with 6 MHz bandwidth and I can use the data flie analyser to generate the corresponding waterfall to check for activity, but it would be nice if I also could take a loo...

Hi Simon, Thanks for your reply. I understand that there are priorities to define very well. For now, I noticed that running V3 on the remote PC, with V2 server running on the same PC I can play back the IQ recordings made with V3 on my PC at home running V2 connected to the server. So I found a wor...

Hi,

Is it possible to tell the timeline for getting the remote SDR recording playback in V 3 , if this is going to happen ?

I can still fall back to V2 but I notice that with the same Airspy the reception in V3 is better as in V2, so now I am hoping this will be in V3.1


Thanks,

Ben - PE2BZ