It's all about the Software

Has anybody tried running SDR Console on one of the Copilot+ PCs with a Snapdragon X CPU. I know it would only run in the x64 emulation, just wondering if there are any issues.

Hello! the first audio is with SDR# , 2 meter band, ham qso, NMF 12 khz...the second is with SDR console without noise reduction, NFM 12 knz...device RTL SDR v3, gain set to 38 for both, same time, same antenna, same PC...where am I going wrong?

hi, regarding NFM listening both of communications in general and communications in amateur radio bands (e.g. in the 2 meter band) what configurations do you use as filter width and above all as noise reduction? I am using for the 2 meter band a...

Hi,

I'm about to buy an SDR, and I'm interested by the Pluto+.
But I also found other alternative like LibreSDR, which seem to be similar (but with a better FPGA), or even less known ones like the GeekRF One (and if you know others, don't hesitate...

A little wish, big effort? But asking anyway...

Hovering the mouse over spectrum or waterfall displays a vertical tuning bar with centre and bandwidth limits plus channelised tuned frequency.

An optional mode could be cross-hairs. Vertical to show...

Hi,
i cannot use my LNB which has big drifts during daylight (over 100KHz) because the geostationary window span frequency is too small. I cannot zoom out and select the beacon to start correct tracking.

It would be nice to be possible to zoom out...

Hello ...
I wonder how I can feed an I-Q stream from external source LIVE into SDR-Console for displaying ??

73 , Jens / HB9JOI

I've started my Christmas Present List early this year. The latest item is for any generous SDR software developers out there...

Similar to a list of markers to show on the spectrum display: this is a set of frequencies to *hide*  from the display,...

I have a user that probably doesn't know that one can use the pre-amp even with the AGC on.
It might be too late to train this person that you don't have to turn off the AGC to get a preamp on
for use when on 20m and higher.

I am forever finding...

Hallo SDR-Console Users,

I use the SDR-Console V3.3 and an IC 9700 70cm + Transverter for Uplink. The frequency the console sends to my IC-9700 is 500 KHz to high on all Frequencys in the ssb part of the q100.
Changing the tx up frequency in the...

Hi All, I use SDR Console and SDR plays duo's (by 3). I also use Icom RSBA-1 software to remotely access my IC-7300.
As my ISP uses GCNAT (all my connections are 5G) I created a VLAN using Tailscale to provide me easy access to my remote radio....

Greetings All
Two questions on the audio spectrum screen...
1) Is there anyway to get rid of the coloured fill to leave just the bare spectrum analyser trace ?
2) Is there anyway to change the vertical scale to bring the trace more in line with the...

Hello,

I am currently using the SDR Console v3.3 program, and I would like to view the frequency and level values within a specific frequency band. Specifically, I want to know if there is a feature that allows me to save the frequency and level...

Hello to the group,

In transmit mode, no data ( power - swr - drv - vdd) except ALC in the transmit meter display.
Screenshot-2024-08-22-111012.jpeg

Thanks for reading !

Renauld ON4KVI

I still could not get SDR Console to show antenna selection with my SDR Play RSPDX-R2 but I had it working on ant A. It was tracking frequencies with satellites when I click on the various ones that were within my footprint in the passes. However,...

I wanted to post that if anyone needs help or wants to discuss using the Elad FDM-DUO with Elad SW2 software using computer supplied microphone input, no latency problems and fantastic TX audio contact me. I am enjoying using my Elad as it was...

I am using the SDR console with an Adalm Pluto, can I also insert the Doppler correction in the Adalm Pluto TX circuit in satellite mode, unfortunately I have not found it, probably only possible with an external transceiver or a second Pluto via an...

Hi All. Could simple hamlib server support be added? In this way SDRConsole would appear as a hamlib server to handle setting/getting the frequency and mode.

You would start a TCP server and repond to only four command, sent in plain ASCII:
F XXX =...

Could someone confirm the latest Pluto Plus Firmware version for me please. I believe from the BATC and Github it is v 0.33, but just wanted to check.
I am currently on v0.31-dirty and it has a few bugs on it.

Thanks for your assitance
Bob G4MWR

how about a freq drift tracking software for inmarsat c band and L band data. i have looked at the geostationary beacon software. seems if it was modified for all freqs it could work?..possible a automatic frequency correction.

Hi, this is rtlsdrblog, I manufacture the RTL-SDR Blog V3 and V4.

The V4 requires that the EEPROM have the manufacturer string be set to RTLSDRBlog and the product string be set to Blog V4 for the librtlsdr drivers to differentiate between the...

Just curious on what the SDR-Console trunking decoder can do.

Local systems:

Oklahoma City Metro Public Safety

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

I already have DSDPlus Fastlane and SDRTrunk both work okay on both...

Hi Simon,

A FM network broadcaster in Australia in currently trialling the Long PS (Group 15A) feature of RDS (Radio Data System), now on air
from multiple transmitters.
I note that SDR Console is unable to currently display Long PS (LPS).
Can you...

Hi.
It will be very practical an option to send Analyzer>crop window parameters directly to data file editor to extract one or more signals from a wideband file.

Best regards.
ANgazu.

Hello,

i am using the favourites list windows very often . I also have a long list of favourites which i am going thru daily ( intruder monitoring ) . It would be superb if i could use the keyboard ( enter ) to activate the current line. I can...