It's all about the Software

I'm very confused why binaural is available for AM and SAM, but not DSB.

SAM-Binaural makes sense in phase-locking the (virtual) CIO to the *strongest* carrier.
An unlocked DSB-Binaural alternative would be useful for resolving stations with...

Hi all,
I'm running SDR console with a sdrplay duo, omnirig and a ic9700. In using the ic9700 on satellite mode and I have everything synced up except RIT. I have selected rit in external radio settings but it never shows on the external radio...

I have tried to capture diagnostics so apologies for long post

Having problem with ELAD FMduo and SDR server.
It was working up til 2 weeks ago.

My setup have a win 11 laptop running v3117 (sdrserver) with an airspy hf+ discovery and elad fm-duo...

Hi!

the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far...

The Fusion 13 option doesn't work so well and this is on a 2021 Mac so it's fairly fast. Lots of pops etc and slow. Never did get the receiver panel to show SSB. Audio very poor on FM. The box to set configuration wasn't consistent. Maybe Parallels...

Firstly thank you Simon - I love SDRConsole...

One feature is if the frequency database could have a filter by time button, so when I click on a frequency, it would only show stations scheduled to be on air now, with option to see all .

I enjoy using Console as the only SDR software in my shack. It is fantastic! I only wish that my Flex 1500 could use it.
Is it possible?
I'm afraid I know the answer. I just had to ask so I can quit dreaming...

Thank you,
John

Hello, I am a student at Kocaeli University. I am looking for open source software stack for 3G like OpenAirInterface for 5G or Osmocom for 2G for my work. (Osmocom has partial support for 3G)

I request you to direct me to the right resource that...

Hi all and thanks for the add. I have a quick query.

I've recently come to the software and am trying it out with my RSPDX and so far so good. So my query is is there an easy way of importing the Mem Panels from SDR Uno to Console's memories or do...

Hi,

I have been using sdr console for years now, but I think it would be great if it could support transmit for DG8SAQ/PE0FKO/SoftRock based radios (currently there’s receive support).

This will enable owners of peaberry pi, multus proficio and...

Version 3.3 Build 3048 , i just updated to the latest version August 1st 2023 and very nice .
I really like the auto upgrade feature (one just runs the downloaded exe) and so far it does not mess anything else up like the saved memory's and Markers...

I use a home built MIDI controller and it really makes my life so easy when working contacts on QO-100 with the Pluto and SSB contacts on the Hermes-Lite2 while sitting back and talking. It will be so awesome to have RIT on the MIDI controller then...

Simon,

At some time in the future, would it be possible to optionally move the Band Plan from the bottom of the pane to the top? It's just a bit less busy in that location.

Thanks!

After running perfectly for several weeks with Phil's KA9Q-radio SW, last Saturday my RX888 suddenly failed.

The failure mode suggests that one or more of the BGA pins of the the FX3 have desoldered, and a FLIR scan of a FX3 showed it running at...

With the new Meteor 2-3, I wanted to add it to the pass list and favorites ribbon.
I have long forgeot how to do that.
I can highlight it and click add, but it does not get added.
I checked the .TLE file and the satellite is there.
Help please on...

With a new Meteor 2-3 now in orbit, I would like to add it to my favorites and top bar.
I thought I remembered how to do that , but have failed every attempt.
I did check in the .tle to ensure the satellite was listed.
Can someone please smarten me...

I am an early user of Thetis with my ANAN-!00D and use this with 2 instances of WSJT-X to operate concurrently 2 different bands. (Transmit only one band at a time of course)
I am very happy with that setup, a small software patch links the CAT...

As your probably aware? MMSSTV has been updated a bit into the 21st century by some EA's over there in Espania , the latest version is 1.13.3 and is on the EA's website and use a translator , YoniQ does have some quirks still .

The YoniQ mode is...

RSPdx , after it was sitting around for a month or so unused , i plugged it in and fired up sdrc and the noise floor indicator needle was at a 8 and the s-meter needle was stuck at a S-9 and nothing i did (adjusting rf-gain/if gain) would get them...

Hello.

I use SDR Console to pilot Adalm Pluto for QO-100 traffic. A question : Where do I connect the key to transmit in CW? And does it require a particular interface or configuration?

73 QRO de Michel F6GLJ

Kind of gave up trying to get the DSD interface* in SDR# to work properly, so perhaps a SDRC version might function better.
With the following proviso; some type of on the fly configuration to avoid having to dig into and edit any bat or cfg files...

Simon,
Recently i built Wolf DUC/DCC Transceiver.
I tested the IQ input with SoftRock XTAL as a receiver its working. Kindly add this Wolf Transceiver in the radio list and other parameter. I am not a developer of the project but i requesting to add...

Hi,
I'm a newcomer to the Pluto and have just received one today. Got all the drivers and it seems to have installed ok. I can see the Pluto in the device manager.
Start up SDR console, add the radio, set the definitions, and hit start.
Everything...

Has anybody experimented using the GPU on the relatively new Intel I750 or other video GPU cards? If so I wonder how it works. The price is not bad at all, about $200US.

{^_^}

Bonjour;
J' utilise SDR Console V3.3 j' ai une déconnexion récurrente du logiciel . Je suis obligé de liquer sur start pour relancer SDR CONSOLE normal ?
merci
Richard