It's all about the Software

The HL2 gateware from v69 up supports ICOM AH-4 tuner protocol. It does require building two level convertor circuits on the back panel of the transceiver but that is the easy part. Before I run off buying some fet's and building the level convertor...

Dear Simon,
Probably the best program is missing an option that will use the mouse wheel to zoom in/out and center the selected frequency.

To not loose the tune functionality, maybe tune when the mouse is on the waterfall, histogram or...

Hello.

Can SDR Console exchange CAT information through UDP or TCP?
I am running SDR console for QO-100.
To logging contacts I'm running a CAT software that reads the frequencies from Console and send them to logging software. All connections...

Hardware: Hermes Lite 2 with Windows 7 32 bit computer
Software: SDR Console version 3.1 build 2320
Issue: Both sides of a conversation only get recorded if in the *** Options -> Hermes Lite window -> Tx Options -> Mute Rx check box is left...

I'm sure I'm missing a setting (I think)

When I set the display to show UTC Time, the Schedule shows local time

Is there a setting to make the Schedule also show UTC time?

Thanks.

Software: SDR console ver 3.1 build 2320
Hardware: Hermes-Lite 2, 32 bit Windows 7 computer
Problem: After keying the voice keyer and then cancelling it, the scroll wheel no longer fine tunes the radio frequency. However, left mouse will step change...

Hello,

Please, is it possible to add this Genesis G11 transceiver to the list of supported radios ?
I know it is old one, but I build it myself, and I am very pleased with its receiver.

Thank you very much,

Best regards,

Dragan, YU1UO

I have a quantity of these units. They are HID and W10 recognizes them. Is there a way to add them to the USB choices?

Thanks

Jim

Hi,

Using Console with a Icom R8600.
Work really well together, but it takes, for me, a little getting used to the locked
radio screen.

Is there any present way of accessing the scanning functions that the radio has while
being controlled by...

I used SDRConsole to snip a 10 second portion of an I-Q file recorded by SpectraVue.

However, the snipped file does not playback in SpectraVue - an error window pops up Input file not valid . The new snipped file does playback in SDRConsole.

Whit

I just wanted to tell Simon how much I have enjoyed using SDR Console. I downloaded the latest Beta and it seems it works even better with my Hermes Lite 2 than the release version. I swear that the Noise Reduction has improved too. I am amazed how...

Hi

This is a nice feature but one wonders why it is not available to an active receiver rather than to random highest
signal(s).

It seems that one might appreciate adding of an enabling setting tor the current Active Receiver (even Active...

Just finished testing a Perseus on my W10-64bit system. Works just fine.

The ability to read at least a couple command line parameters might be nice.

The first is /i (or -i or --identity). It's parameter would be the identity name.
for example: /i HF SWL RX888 MKII

The second is /a , -a, or --autorun. A parameter...

I've been trying to understand how to set up SDR Console with my RTL-SDR dongle. Like any man, I hate asking for directions - and so I tried Google to find a definitive answer. Problem is that I find several articles on this topic, but most seem...

What file do radio settings get saved in? For example, I am having an issue with Radio A and I delete it from my definitions so I can reinstall from scratch. Are there some old settings I need to delete too?

Please add support for multiple CW Skimmer instances.

Hi
The rig type FT897/857/817 do not allow Doppler correction via CAT during Tx period and working FT4 modes on the linear Sats is very difficult (only at elevations less than 10 degrees when Doppler shift is very small)
Is it possible to find a...

Dear Smon:
I am Jabi, ea2aru, and I am using and not have problems with your Sdr Console.But I have one question: for satelite QO-100 uploading DATV, Digital Amateur Television, I am using the Obs program. But not is incorporated the external relay...

Hi Simon,
Just a reminder, the virtual serial ports (like the ones created by VSPE) are not recognized by the rotator configuration.
73, Max

when qsy in the tx box the tx frequency changes in that same moment i do it (like it should be)

when i change the frequency by midi or inside the rx panel the tx does not follow (at the same moment) but just after tx-ing once

version 2511 10th of...

To use a bandwidth of 50 MHz, the following device string is needed:

peak=0.003906,otw_format=sc8,addr=192.168.10.2,uhd

works great with gqrx at the same system,

but sdr-console crashes, also the newest version.

if crash dump or any other...

Currently I prefer the NetSDR protocol which has been an interesting learning curve for me. The protocol is local only- porting to the internet directly doesn't work for whatever reason.
my efforts to date my 10 year old can work it.

SDR console...

Hello All

SDRC crashed, and wouldn't run despite multiple restarts and regressing to v3.1 (3AUG21), from a special kit (15JAN22) that Simon provided.

Also removing all SDR radio hardware did not succeed in running.

HOWEVER,

SDRC has...

Hi,

Would it be possible to have a UDP listener or TCP to track N1MM or HRD.

This would free up com ports or com port splitters that are unable to work together.

73
Pat
OO7P