It's all about the Software

The ability to hit a button to toggle transmit from the External Radio form would be great. I use the RSP1 as a tracking receiver for my FT-991. The ability to toggler transmit on the External radio from SDRConsole instead of having to reach over...

Hello there!

I'd like to ask something that I did not find in the documentation, neither was I able to find something concrete in the forums about it.
-> What do the percentage sliders for RX filter and TX filter exactly do (Radio section on the...

Hello! I've seen that hotkeys can be custom mapped and that there is also MIDI support for external control. Great! I'd like to be able to expose the FM squelch on the currently selected rx to the keyboard or an external controller. I was thinking...

Match to 3v3b2870

- Options / USB Relay:
> Both links to www.dcttech.com and www.Ucreatefun.com are gone. The sides don't longer exist
If you use HID usb Relay at ebay there are some 1/2/4/8x but I don't know if they work here.
> HELP link...

Hi,

I am temporarily using an RTL-SDR V3 dongle while learning about SDRC. It basically works but the external receiver window always shows Port Busy. Is this a problem? The radio is a Kenwood TS-590S and the software is DXLab. I am using the basic...

(1) I will supply screenshots if needed, just tell me what to provide.

I used win7 for the longest time. Everything worked fine. I had to replace my pc and it came with win11 installed. I am new to win11.
Here is my issue: Radio on, SDR console...

Hello,
I want to record more than one audio stream within 500khz of bandwidth with only one SDR. I am trying to record NFM Local EMS and NFM Local LEO. Is this possible.
If I use data recording it has too much dead space and takes up to much...

I have upgraded status of your mail from spam to not spam with Gmail

(forum registration confirmation email received by Gmail)

Would a Propagation topic be useful for HF ?, or propagation results , or what is that shown on the sdrc screen .

Like for instance in the picture , see all those horizontal lines going up and down in frequency (mostly down) in the waterfall , the...

This evening I wanted to record a few hours of LRA36 on 15476, so I pointed SDR Console 3.2 at my Airspy, set the bandwidth to 192 kHz, and started recording. Reception was very good for the first hour and a half, then started to fade. After 3 hours...

Hi
I probably forgot a parameter in my SDR Console setup using a RSP1A and a Yaesu FTdx via Omnirig.
At the start of SDR Console the «External Radio» window starts automatically and shows the frequency of the TX from Omnirig as expected but the main...

Is it possible to keep waterfall fixed, when the External Radio has IF output selected, and have tuning bar moving when frequency is changed, similar to when Antenna: same frequency as external radio is selected?

Denny, KX7M

Hi,

i like the SDR-Console very much. I use it on Shortwave and QO100. My next plan is to work Satelittes on VHF/UHF with pluto and pa.
Now my question is if it whould be possible to make an connection to mqtt server. Many thinks would be possible....

Hi
I probably forgot a parameter in my SDR Console setup using a RSP1A and a Yaesu FTdx via Omnirig.
At the start of SDR Console the «External Radio» window starts automatically and shows the frequency of the TX from Omnirig as expected but the...

I know most newer TV/Monitors don't have this problem. However it can occur with some. My suggestion is an option to allow the image to randomly shift a few bits up, down, left and right to prevent screen ghosting/burn-in.

TX N7QPP

Radio G33DDC with V. 3.3 B2870 Win10 64 most recent MS build.

The console defaults to NR3 on first install, selecting any other NR# ( noise reduction ) or ( turning it OFF) attenuates the audio to a very low unusable level. Selecting NR3...

Hello,

Any way to use an Icom RC-28 rotary encoder with program ?

If not, what's the physically smallest similar item that will work ?
Very limited desk space.

Thanks,
Bob

Well that's what i think it looks like travelling across the screen , they can go up (left to right) or down (right to left) and a laugh to look at , also associated with a chirp sound .

They be an Ionosonde
if anyone was wondering , one can see...

Hi,

I am testing v. 3.3 version. So far not bad, but noticed that this version is little slow, for example setting frequency is little laggry, and noticed little clicks on sound... set buffer to x4 - thhis setting so far is the best... but still...

On V3.3 when I click the waterfall AUTO, or click and drag the adjust slider, the audio pops and cuts out while I'm adjusting. Also the audio will pop or cut out on occasion.
I'm running console on a Windows 10 pro, 3.4 GHz processor, 32 GB ram. I'm...

I was tired of the old $20 HP Windows 7 netbook disconnecting from the LAN intermittently, usually while I was away from town. Moved it over to my daughters old W10 laptop that also hosts two Icom remote bases. When either of the two Icom's are...

Greetings,
Is there a way to set a (fixed) XIT (Transmit incremental tuning) on a per radio basis?
I have two different radios (on OmniRign radio 1 and 2) an need to align them to my
receive frquency. I use the SDR-RTL dongle RX

BTW: what is the...

I have IC7300 via pandapter, I connect SDRplay receiver.
Everything is great, but the Signal meter readings on the SDRconsole are highly inflated relative to the IC. The reception level is the same, is there a way to lower, adjust these values?...

Hey,

is there a way to record audio with the ignore squleched audio checkbox and creating a new mp3-file on every conversation (non-squelched)?

its hard to search the big mp3files without timestamps. if there is a new file on every non-squelched...

MY SDR is not working, I have waterfall but am unable to get any signals. I thought I would uninstall and start over but am told each time that I lack administrator rights to uninstall the SDR software. I also learned I have 3 copies of SDR on this...