It's all about the Software

Hi,

to my knowledge the actual Aaronia support is limited to the v6 full version , not the ECO. So I wonder if it is planned to support also the ECO, as this is for sure the radio that will be bought by many hobbyists.

I own the ECO in RX/TX...

SDR console is my favorite program for controlling SDRs, the latest addition is a ZynqSDR/LibreSDR which comes in a CNC housing. This SDR it is equivalent to the PlutoSDR, in fact the Pluto+ with 2TX and 2RX but it requires modified firmware. What...

Subject: Assistance with Ingesting Raw IQ Data from SDR Console across LAN into Python on another PC

Hi, I’m attempting to ingest raw IQ data output from either the Data Repeater or the SDR Server in SDR Console using Python. I can successfully...

The spectrum of a spyserver shows op with a peak carrier on any entered receive frequency and a valley around it.
On certain higher frequencies the whole display starts bouncing up and down.

When using the SDR# client all is fine.

You can try with...

Hello,

I have been running thetis with HL2, fully loaded, for a while now. It works great, band switching the XPA-125B and all, but I want to try SDR Console. I have a couple SDR dongles I want to add to this setup to make a sweet SDR rig. But...

Found information on this gem on radio reference a couple months ago. Am surprised not many folks have this. The waterfall display is what drove me to this. Was going to get a Chinese radio with a waterfall display but to many mixed reviews. Am glad...

Hi Simon:

I feel like I am asking for the moon to even ask for DX cluster spots to be added to the program. But is this possible, or no. This is the best world map I have ever seen for hams!

Thanks for creating this.

Scott N1IA

hello
will be great if you can add a SA44B — 4.4 GHz Spectrum Analyzer

do you thing it is possible
thanks
and by the way i love sdr console

Hi All

I am trying to find a way to solve an issue I am having,
My setup is a Adam Pluto Controlled by SDRconsole and I am running JTDX and JTsync on my PC
Now when I sync the time on the PC to the server I am seeing the FT8 stations have a dt...

Hi,

I'm about to buy an SDR, and I'm interested by the Pluto+.
But I also found other alternative like LibreSDR, which seem to be similar (but with a better FPGA), or even less known ones like the GeekRF One (and if you know others, don't hesitate...

A little wish, big effort? But asking anyway...

Hovering the mouse over spectrum or waterfall displays a vertical tuning bar with centre and bandwidth limits plus channelised tuned frequency.

An optional mode could be cross-hairs. Vertical to show...

Hello ...
I wonder how I can feed an I-Q stream from external source LIVE into SDR-Console for displaying ??

73 , Jens / HB9JOI

I've started my Christmas Present List early this year. The latest item is for any generous SDR software developers out there...

Similar to a list of markers to show on the spectrum display: this is a set of frequencies to *hide*  from the display,...

I have a user that probably doesn't know that one can use the pre-amp even with the AGC on.
It might be too late to train this person that you don't have to turn off the AGC to get a preamp on
for use when on 20m and higher.

I am forever finding...

Hallo SDR-Console Users,

I use the SDR-Console V3.3 and an IC 9700 70cm + Transverter for Uplink. The frequency the console sends to my IC-9700 is 500 KHz to high on all Frequencys in the ssb part of the q100.
Changing the tx up frequency in the...

Hi All, I use SDR Console and SDR plays duo's (by 3). I also use Icom RSBA-1 software to remotely access my IC-7300.
As my ISP uses GCNAT (all my connections are 5G) I created a VLAN using Tailscale to provide me easy access to my remote radio....

Greetings All
Two questions on the audio spectrum screen...
1) Is there anyway to get rid of the coloured fill to leave just the bare spectrum analyser trace ?
2) Is there anyway to change the vertical scale to bring the trace more in line with the...

Hello,

I am currently using the SDR Console v3.3 program, and I would like to view the frequency and level values within a specific frequency band. Specifically, I want to know if there is a feature that allows me to save the frequency and level...

Hello to the group,

In transmit mode, no data ( power - swr - drv - vdd) except ALC in the transmit meter display.
Screenshot-2024-08-22-111012.jpeg

Thanks for reading !

Renauld ON4KVI

I still could not get SDR Console to show antenna selection with my SDR Play RSPDX-R2 but I had it working on ant A. It was tracking frequencies with satellites when I click on the various ones that were within my footprint in the passes. However,...

I wanted to post that if anyone needs help or wants to discuss using the Elad FDM-DUO with Elad SW2 software using computer supplied microphone input, no latency problems and fantastic TX audio contact me. I am enjoying using my Elad as it was...

I am using the SDR console with an Adalm Pluto, can I also insert the Doppler correction in the Adalm Pluto TX circuit in satellite mode, unfortunately I have not found it, probably only possible with an external transceiver or a second Pluto via an...

Hi All. Could simple hamlib server support be added? In this way SDRConsole would appear as a hamlib server to handle setting/getting the frequency and mode.

You would start a TCP server and repond to only four command, sent in plain ASCII:
F XXX =...

Could someone confirm the latest Pluto Plus Firmware version for me please. I believe from the BATC and Github it is v 0.33, but just wanted to check.
I am currently on v0.31-dirty and it has a few bugs on it.

Thanks for your assitance
Bob G4MWR

how about a freq drift tracking software for inmarsat c band and L band data. i have looked at the geostationary beacon software. seems if it was modified for all freqs it could work?..possible a automatic frequency correction.