It's all about the Software

SDR-Console, wjst, VAC.
Everything ran fine on win-7, ran fine on win-10....Win-11 I have nightmares. I have a high school science project going on here with my audio settings. What works one day, does not work the next. Any setup help would be...

Hello there!

I'd like to ask something that I did not find in the documentation, neither was I able to find something concrete in the forums about it.
-> What do the percentage sliders for RX filter and TX filter exactly do (Radio section on the...

Hello! I've seen that hotkeys can be custom mapped and that there is also MIDI support for external control. Great! I'd like to be able to expose the FM squelch on the currently selected rx to the keyboard or an external controller. I was thinking...

I think this feature may still be mentioned in the Hermes-Lite section, but I wanted to give it more visibility with this feature request.

There is a new build of Hermes-Lite taking place as we speak, so there will be even more users of this great...

Match to 3v3b2870

- Options / USB Relay:
> Both links to www.dcttech.com and www.Ucreatefun.com are gone. The sides don't longer exist
If you use HID usb Relay at ebay there are some 1/2/4/8x but I don't know if they work here.
> HELP link...

Copied pasted from HL2 Facebook group:
Jim Ahlstrom (designer of the filter board) has designed a general I/O board for the HL2. It allows things like amplifier/transverter interfacing, PureSignal input, dedicated receiver input and a few other...

I searched the forum with no results. Can SDR Sharp control this device? I would like to use it as a classic SDR receiver with software other than Expert Electronics. Thank you for the information.

I am using the latest version of Console with an Airspy HF Discovery, bandwidth set at 912kHz. I would like to make IQ recordings of the entire MW band from 530kHz to 1710kHz. I tried using the MW settings in Favourites but the resulting recordings...

I was not satisfied with the Noise Reduction and Noise Blanking Performance of the ICOM-7300. The Noise Reduction and Noise Blanking performace of SDRSharp impressed me (thanks Joanne).

The IC-7300 has a USB IF output where the the IQ Output as...

Hi all,

Is it possible to override the built-in 200 Hz high pass filter when using narrow FM? Although the majority of voice intelligibility is probably above this, I would very much prefer to adjust this and bring some of the lower frequencies...

I'm running 3.3 build 2870, when I change bands using favourites the Rx audio changess to the default windows audio device. Could we have it retain the last used setting please.

Thanks

Phil VK7ZPD.

Hi,

I am temporarily using an RTL-SDR V3 dongle while learning about SDRC. It basically works but the external receiver window always shows Port Busy. Is this a problem? The radio is a Kenwood TS-590S and the software is DXLab. I am using the basic...

I am new to HL2
The first board did not work and I ordered another.
I tested now with new board and have no output when tuning.
OP power set to 8 for not getting again a defective output
So finaly I tested with straight key.
I have 2 watts output...

SDR Console v3.2 for Windows 7 is locked by default

How to unlock it ?

Hovering over Program lock icon I get lock locked
When I click Program lock, new window opens with a message: Program locked
and Open lock icon to click
to unlock the Program...

How to upload screenshot of my SDR Console v3.2 ?

works for url address

(1) I will supply screenshots if needed, just tell me what to provide.

I used win7 for the longest time. Everything worked fine. I had to replace my pc and it came with win11 installed. I am new to win11.
Here is my issue: Radio on, SDR console...

Hello - I'm trying to understand how to set up SDR-Console's satellite tool to automatically record satellite I/Q data based on the schedule. I can't quite figure out how to set up and enable automatic recording. I opened the Automatic Scheduler...

Hello,
I want to record more than one audio stream within 500khz of bandwidth with only one SDR. I am trying to record NFM Local EMS and NFM Local LEO. Is this possible.
If I use data recording it has too much dead space and takes up to much...

SDR Console v.3.2 32-bit installed, Media-Tech usb RTL dongle installed, recognized, no signal at all (Windows 7)

Is there any way to check if any signal is received ?

RTL Dongle USB - unknown 20 -2000Mhz (drivers installed)

dBm meter set at...

The day before yesterday i received a handheld personnel Dosimeter , brand new and a weeks wait off the bay .

14 day battery life with screen and alarms off , rechargeable .

After setting it all up i hung it on the wall off a self tapper turned on...

Downloaded Zadig as advised, run in Windows 7, 32-bit
to update driver and Total Security 360 monitored 2 problems
and win usb driver update locked

I can attach photo.

thank you

darius

Media-Tech USB RTL dongle installed, recognized, no signal at all

any idea ?

small indoor antenna installed by default
no signal at all

RTL usb dongle donated by my friend
since another Media Tech usb dongle purchased a week ago was to short to...

SDR Console v.3.2 32-bit installed, Media-Tech usb RTL dongle installed, recognized, no signal at all (Windows 7)

Is there any way to check if any signal is received ?

RTL Dongle USB - unknown 20 -2000Mhz (drivers installed)

dBm meter set at...

I have upgraded status of your mail from spam to not spam with Gmail

(forum registration confirmation email received by Gmail)

im using a RTL SDR v3 , this happens when i use the right button of my mouse to move around the frequency or when i click on the center button, and no, this is not a dc spike, this thing its jumping .