It's all about the Software

When I double click the program,the program will appear on taskmanager for 1 sec and then disappear.It means it only run for 1 sec and crush.It crush too fast to create the dump file.So I can't collect any dump files from taskmanager.
I used a...

Hello,

I posted this, first, to the GroupsIO Forum before I realized that I should have
probably posted here instead. Sorry. Blame it on old age now.

Question:

Have an Icom R8600.
The program seems to capture the radio just fine, as the small...

Hi all, now running on v3.4 but the tx meters are absent except the ALC meter, which was also the case on 3.3. It's not a major problem but it would be nice to see them :-)

Regards,

Roger G8VLR

Hello! the first audio is with SDR# , 2 meter band, ham qso, NMF 12 khz...the second is with SDR console without noise reduction, NFM 12 knz...device RTL SDR v3, gain set to 38 for both, same time, same antenna, same PC...where am I going wrong?

Hi all,

I have run my QO100 setup for nearly a year now. The heart of the unit is a Pluto+ which works very nicely on v3.3 (2993) with my Jabra evolve usb headset. I decided to try an update to the latest version (Feb 2024) and sound from the...

I have Omni-Rig v2.0 installed and running and am able to connect to SDRUno just fine and control my radio (FT-991A). I have installed SDR Console (v3.3) and even the Beta (3.4) and am unable to connect to my external radio because it constantly...

hi, regarding NFM listening both of communications in general and communications in amateur radio bands (e.g. in the 2 meter band) what configurations do you use as filter width and above all as noise reduction? I am using for the 2 meter band a...

Hi,

I'm about to buy an SDR, and I'm interested by the Pluto+.
But I also found other alternative like LibreSDR, which seem to be similar (but with a better FPGA), or even less known ones like the GeekRF One (and if you know others, don't hesitate...

In the options (...) dialogue, it would be nice to have mode button reordering.

Given the minimum DSP width, mode buttons could fit into 4 columns. Another user option?

Hello all....

I was on QO100 calling CQ whit my voice keyer running, after som call a other ham told me that I was to wide, arround 3.5khz++

I have my settings on 3Khz BW in sdr-console 3.3, so I am a littel confused about that I have so big BW...

A little wish, big effort? But asking anyway...

Hovering the mouse over spectrum or waterfall displays a vertical tuning bar with centre and bandwidth limits plus channelised tuned frequency.

An optional mode could be cross-hairs. Vertical to show...

Hello,
I just received my LibreSDR and tested it with SDR Console Version 3.3 build 2848 Ethernet connection.
RX, works well without any problems.
TX, no signal out of the LibreSDR.
LibreSDR is booting from SD-card (SD-card JT 2024 02 03)...

Hi,
i cannot use my LNB which has big drifts during daylight (over 100KHz) because the geostationary window span frequency is too small. I cannot zoom out and select the beacon to start correct tracking.

It would be nice to be possible to zoom out...

can someone please help? sdr console finds rtl dongle but i have no signal,
in the select radio box under option it says tuner : unknown,
on the pc in the house everything works fine and under option in the select radio it says tuner: rafael micro...

I have a problem, SDR Console freezes, mostly when I use the satellite function.
You can still hear the sound, but the interface freezes completely and there is no error message.
I have to close the program using the task manager.
I have already...

Hello ...
I wonder how I can feed an I-Q stream from external source LIVE into SDR-Console for displaying ??

73 , Jens / HB9JOI

Hi,

I'm developing a device to remote control the console and I observed an anomally with the MD command using the Serial port (CAT) connection.

As the documentation say (

MD
Mode
Read: MD; returns the current mode.
Write MD ;
Note: the mode...

I've started my Christmas Present List early this year. The latest item is for any generous SDR software developers out there...

Similar to a list of markers to show on the spectrum display: this is a set of frequencies to *hide*  from the display,...

Hi All...

I'm fortunate enough to be picking up an FDM-S3 later today but, as a non-ham with little or no electronics experience I really need some advice as to which power supply to purchase to get up and running.

I'll only need it for the S3 for...

Hej!

The Output power slider shows values ​​between 0 and 100%. unfortunately this regulator is not linear with the output power. Is it possible to linearize this or even calibrate it in dBm or W?

73, Holger DG3FEH

hello, I installed yesterday sdr console in my laptop
everything works ok ,but I have a problem , that I had never befor:
every signal I hear and see in waterfall has a shadow on the same frequency, but its only optical,the stations they are sending...

I have a user that probably doesn't know that one can use the pre-amp even with the AGC on.
It might be too late to train this person that you don't have to turn off the AGC to get a preamp on
for use when on 20m and higher.

I am forever finding...

Hi, new on this forum.
I use HL2 with all softwares like Thetis Sparksdr and Quisk, but with SDR console V3.2 or 3.3 the output power is around 0.5 W when speaking in the mic ( drive , proc & gain 100%) - Tune or whistle gives around 4 W a little...

hello, I have a small problem on a friend's SRD server, the server starts fine, it is visible on the monitor, port 50101 in TCP is open, the port forwarding in the box is OK, the parser -feu is OK, and from home I connect to his server without...