It's all about the Software

Hi all,

I'd like to use a footswitch with my Adalm Pluto on QO100 for tx/rx switching. Is it feasible and if so how?

Thanks and regards,

Roger. (G8VLR)

In the bandscope in CW, within the filter bandwidth , the CW peck or, as in thetis , the tx frequency , depending on the sidetone that operator chooses .tnx

I came across this splitter the other day (i'm not associated with them) , i need one for the FT-2000 and the Rspdx using the rear in/out and rx button on the 2000 .

One is turning up in a few days , it looks nicely made with input protections ,...

Small issue I have with my fmduo tx/rx is that sdr console identifies it as rx only model
As such I have no way to switch antennas.

Also I cant see a way to disable LPF and thus go past 54 MHz

Any ideas team?

Hi

Has anyone managed to get the RS-HFIQ working with SDR Console? I much prefer this software than the recommended HDSDR

Hi!

the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far...

between a few Betas ago and Sept. 16, my unchanged hardware setup no longer is able to detect or use the RX888 Mk II.

log files seem interesting in that the RX888 is responding to probes and the responses look successful.
the unit serial number...

I don't see an option to get the SSB medium under receiver. What do I need to do to get this?

Thanks

A very wonderful ARINST SDR Dreamkit V1D has appeared. Planning to support your receiver using the SDR Console?

The Fusion 13 option doesn't work so well and this is on a 2021 Mac so it's fairly fast. Lots of pops etc and slow. Never did get the receiver panel to show SSB. Audio very poor on FM. The box to set configuration wasn't consistent. Maybe Parallels...

Hi Simon
Firstly huge thanks for SDRConsole. By far the best sdr program

One request I would like is a button on the Frequ database to filter by time. So when its tracking it only shows database entries that are scheduled to be on air now (with...

Hello!

I have been using SDR Console for about a year for VHF use with transverters with a Hermes Lite 2. I recently purchased a second HL2 so that I don't have to swap cables to switch between 222mhz and 144mhz.
I used the second identity which...

Firstly thank you Simon - I love SDRConsole...

One feature is if the frequency database could have a filter by time button, so when I click on a frequency, it would only show stations scheduled to be on air now, with option to see all .

In the same vein as I/Q (aka Data) recordings would it be possible to include audio (aka AF) recordings in the scheduler? I would find this extremely useful to record audio ony overnight from several different frequencies at different times. By...

I recently installed SDR Console after running a few other SDR packages, and connected up my RTL SDR Dongle. Selecting the RTL SDR as the radio with a bandwidth of 2.4 MHz, and pressing start I get - Nothing. No audio, no visual dospalys, just the...

I have not been able to get the LimeRFE to work above 100 MHz with SDRConsole. What I have found is the logic levels on U9 (SW6_V2 & SW6_V3) are not correct at 222 MHz. As such it can not receive or transmit on J3 at 222 MHz. SW6_V2 has to be a 1...

Hello, I have a problem using the Adalm-Pluto together with the SDR-console for QO-100 communications. So far, everything works fine except of full duplex. Anytime I switch from RX to TX the console waterfall becomes completely noisy and no signal...

Hello,
I detected a bug, when changing TX filter setting e.g. from 2k7 to 2k9 for some testing...
If I want to change it back from 2k9 to 2k7, the TX settings still using the increased bandwidth settings.

This problem happens for all version of...

Opened my thoroughly awesome SWM, and oh no! Its doing some kind of weird, vertical line thing again, like I stumbled across a long time back... :shock:

Uh, actually, Happy Equinox!!! :mrgreen: :lol:

For those who missed it, set your clock/date...

I am surprised that any of the SDR control programs dont have the option of piping the output audio through TCP link. For Example DSD Plus uses this for multi SDR use. Especially if set up for two RTL SDR's. I suggest this if programs like FLDIGI or...

I enjoy using Console as the only SDR software in my shack. It is fantastic! I only wish that my Flex 1500 could use it.
Is it possible?
I'm afraid I know the answer. I just had to ask so I can quit dreaming...

Thank you,
John

First a big thank you to Simon for fixing NR4! While I had a workaround for this using Favorites, it is still VERY NICE to now switch modes and not have NR4 warble. I've been testing this fix and find no issues and frankly it makes shortwave...

Hello, I am a student at Kocaeli University. I am looking for open source software stack for 3G like OpenAirInterface for 5G or Osmocom for 2G for my work. (Osmocom has partial support for 3G)

I request you to direct me to the right resource that...

I'm trying to calculate the dBm of some raw IQ samples I got via gnuradio but I can't seem to find a correct link. I looked at the ADC my hackrf one uses but the IQ values don't seem to be directly related to the voltage measured. This is the...

Would a Propagation topic be useful for HF ?, or propagation results , or what is that shown on the sdrc screen .

Like for instance in the picture , see all those horizontal lines going up and down in frequency (mostly down) in the waterfall , the...