It's all about the Software

Hi.

Maybe someone with solid knowledge about USB3 drivers and HW can give me a hint about how I should proceed with my investigation and hopefully solving of the below described problem.

I had my RX-888 open in order to get +5V from the USB...

This is more of a how is the sausage being made question. When I have created a CSV file in Data Analyser, it has taken its information from a +/- 0.5Hz slice of spectrum.

For each timestamp, is that data the total power level within the +/-0.5Hz...

Hi board , im Sandro from Milan , Italy
I'm just owner of this good SDR and i'm trying to use SdRconsole V3.0.26 build 2088 .
I have an Wellbrook Loop Ala 1530

Issue is related to audio feedback that on SdrConsole is a little distorced some fading...

Hi,
i want to use SDR-Console in network with SDR Console v3.0.27
When i go over Select Radio ->Radio Definitions ->Search -> Afedri LAN.
No device found.
The logfile is like this:

20:13:30.935: Radio Afedri-SDR: Auto-Detect> Host adapter address...

I was exploring some of the neat changes that can be made via options and was delighted I could tweak many to my liking to make my RSPdx play even better. But when I closed console down and restarted it some stayed but many went back to default. Is...

Hi,
Using SDR-CONSOLE with multiple dongles, is it possible to have more than one fully working radio on the screen at the same time?
Cheers, Camerart

Hello Community,
I am still on the way to switch from SDR Uno to SDR console because of connecting my FT 817 to sdr console.
In order to see how sdrc works I made a simple setup.
1. Rspdx on sdr uno
Signal generator set to -40,2dBm, cable and...

Hello Simon & group. I thought I would share 5 items I wish your software could do in a future update. I currently use a RSPdx:

1. Scan memories (squelch the radio, select the memory banks you want to scan then let her rip).

2. An enable button to...

Hi,
I have a Pluto running with SDR console v3, ASUS pc and win 10, trying to get a QO 100 station together.I have the RX working ok, but I cannot get any TX. The console TX DSP panel all seems to operate as it should, but no output from the Pluto...

Any chance of incorporating SDRplay TCP server support? In particular the extended support.

USB connection using API V2 an V3 is already supported. But we seem to frequently get posts about connecting using TCP.

You can connect using RTL_TCP...

Hi,

i'd love to see an option to set a custom bandwidth in the radio settings. Right now i'm using sdrconsole with an sdrplay tcp server (rtltcp compatible) and the maximum bandwidth i can set is 3.072MHz while the radio can do 8MHz (which should...

Given the current lack of any decent GPUs at sensible prices I been looking at cheaper available options that will give me dual monitor output.

How does the MSI GeForce GT 1030 2GB OC card fare for CUDA performance, I did look on the Nvidia site...

The latest extio available from Oscar Steila allows upto 140Msps sampling rate and 70MHz bandwidth, is it possible to add something similar to Console? Having 16bit performance up to 70MHz from the HF port will allow simultaneous coverage of 10, 8...

Simon
Could you put on your improvement list for the SDR ELAD FDM-S3 the possibility of putting the same value of Visual Gain that you planned for the FDM-S2, that is to say a maximum of - 40 dB,
Currently you have limited the FDM-S3 at -30 dB...

Hello,

Just getting set up with a new CloudSDR (as Simon is aware from my ramblings in another group). I am a big VHF and above searcher and DX'er and using CTCSS and DCS tones to identify unknown stations is a big part of that.

I notice under...

New LAN-IQ Owner searching for SDR control software - SDR Console v3 appears to work and is promising. However install footprint seems huge (600+ Mb?) - Any way to determine minimum disk space & files needed for a single radio?

Thanks.

I downloaded the 3.0.26 version of the SDRConsole (v3) to update my 2.0.20.

All is running nice.

I wish to link the program to my Icom IC-7000 through the Omnirig 1.19 for freq CAT control.

Now my Omnirig are in well relations with MixW3, JTDX,...

See this link .

For the time being don't use FW 0.32, stay with FW 0.31.

Hi all,

For some time I see people struggle with the question if their present computer of a one he or she wants to buy works fine when using SDRconsole.

It can be a guideline. Items like CPU model, memory, GPU, SDR model, used sample rate...

Hello,

Have been trying to fit some of CSVUserlistBrowser, and what I normally have showing in Console (when not using CSVULB) all on
my pc screen. Dragging an edge just cuts stuff off. Running W10.
A real battle.

I know that the screen...

Is there a way to interface the Icom IC-7300 and HRD and SDR Console for use at the same time? If so, please elaborate...my email is w4jcwjohn@gmail.com

Hi,

this is a crosspost, it first appeared here (I just joined the forum this morning):

I have found an entry in today's Windows Event Viewer that the SDRServerService.exe has crashed last night.

At that time, I didn't use it, and to be more...

Hi

My SDR console has suddenly stopped working with my RTL SDR dongle.

It starts up and I select the dongle, but nothing shows up on the waterfall and no sound comes out the speakers.

And when I close SDR Console it crashes.

My RSP1a works fine...

Hi,
When editing a 46 Gb I/Q file (see I-Q file_editing-#1 ) to extract a 200 kHz wide full lenght portion, the size of resulting file is less than 100Mb and the file covers a few minutes only of the original file (see I-Q file_editing-#2 ).
Did I...

Server Version V3.0.27, LimeSDR not exist in the server radio definition.
Server.png

However It existed in the previous version V3.0.22
Server3.0.22.png

Can I fix this myself?
Or is a deeper containment required?

Updated 18.04
The console...