It's all about the Software

Weird one this...

If I start SDRC with the AGC panel visible, then the splash screen stays up indefinitely while the task sits burning CPU (see screenshot). Note, the radio (an SDRplay RSP2) has not been started. The splash screen does go away when...

In later versions of the gateware on the HL2 there is a band-volt modification to automatically change the band on a linear amplifier (it sends a specific voltage per-band to the amp).

It's explained here:

This mod implements the generation PWM...

Has anybody experimented using the GPU on the relatively new Intel I750 or other video GPU cards? If so I wonder how it works. The price is not bad at all, about $200US.

{^_^}

Hi

I am using the HL2 with the band-volt modification to automatically change the band on my linear amplifier (it sends a specific voltage per-band to the amp).

It's explained here:

This mod implements the PWM required with a code element in...

Screenshot-2023-05-26-092033.jpg

I am in the Central time zone, currently observing daylight savings time. Windows 10 is set to show Central time and to adjust for DST.

In the screenshot, the correct PC time is shown on the main clock but the...

Bonjour;
J' utilise SDR Console V3.3 j' ai une déconnexion récurrente du logiciel . Je suis obligé de liquer sur start pour relancer SDR CONSOLE normal ?
merci
Richard

Hello Simon,

On my system the CPU and GPU performance graphs are not indicative of the System Performance tool.

See attached screenshot.

73 Hauke (VK5HW)

Hello,
I have a problem with the mouse in SDR Console, latest version, not beta version. I use Winsows 11 as the operating system.
The problem presents itself as follows:
I can move the mouse in the spectrum, but I can't set any filters, and I can't...

I have created a VSPE virtual splitter port for my rotator so that the World Map can track PSTRotatorAZ. My serial port is COM3 and the splitter virtual port is COM20. While PST works fine on COM20, COM20 isn't listed at all in the World Map port...

First post here, new user of SDR C so I hope that someone has an idea of how to resolve a tuning problem.

Elad FDM Duo as the main receiver (not Remote rcvr) on Com3. Works great with SDR Console but I have a query when using Dx Commander. I can...

Hi Simon
Any progress on the 11m DXCC Prefixes ?

Hi
I am noticing an issue with this version while adjusting the waterfall contrast/brightness.
While I am moving the brightness bar, a noise us generated on the waterfall along with a static sound noise. That happens with more intensity if the...

While fiddling with the RSP1A and it's needed AM BC filter, I noticed this mess on my screen. Was active this AM, then mid-day was off. Now this PM it's active again.
Peaks are at EVERY 6 kHz, which is a new one for me. The QRM drifts ever so...

Hi all , is there a ExtIO for the RSPdx and spectravue? , i have spent several hours looking about and no luck so far , no real reason or urgency btw as sdrc and uno are just fine but i would just like to try spectravue just because :roll:
cheers...

I happened to be in the repeater shed and noticed a user on the new SDR-IP was down in the LW band. The AM BC filter was primarily for the RSP1A due to it's poor front end hearing/seeing AM signals all the way up into 40m. So... enjoy AM BC now on...

I am running v3.3 build 2949 (April 24 2023, 05.45.01) and every time I select a Favourite on 432MHz (GB3UHF) the Console crashes.
I give up waiting after 20 minutes of the application telling me to wait so a crash dump is highly unlikely

Even...

How to change the ScreenShot from jpeg to .png
Thanks
Larry K4LED

Would a Propagation topic be useful for HF ?, or propagation results , or what is that shown on the sdrc screen .

Like for instance in the picture , see all those horizontal lines going up and down in frequency (mostly down) in the waterfall , the...

I have long used and enjoyed the SDR Console, and believe it's one of the most featureful and capable out there.

It's just a pitty that I cannot transmit with my homemade and kit-made SDR radios based on hard/soft rock which use sound card input as...

While using the Airspy on Super Station #1, I get a rapid pulsing (ticking) sound when RXing a signal thats not near the center of bandscope. This occurs ONLY when operating at bandwidth of 384 thru 912 kHz . Happens on two different client laptops....

Just for grins, I loaded the latest SDR Console beta and SDRuno 1.41 on to my 2012 HP Pavilion g-series laptop (AMD A6, no gpu) running Win 8.1. Both appear to run just fine. 7.4% on the cpu for Console is quite respectable, I believe. :)...

Hi All
Thanks for your help.
I've been trying for several days to configure SDR console with cw Skimmer with SDRplay1A without getting results.
The real problem is with the frequency sync between Cw skimmer and SDRconsole. As for the decoding of the...

Hi,

I'd like to report what appears to be a minor bug in the Scheduler Recording dialog window.

When creating a new scheduler definition, the list of events does not populate until I mess with the Title text box. Before messing with the Title box,...

I have been testing a Wellgood Loop Antenna with an RX-888 MKII. I've been getting impressive results, especially around 5 MHz for the UK Aero Volmets where there is a low noise floor.

But I have a huge noise jump from around 8.5 MHz to 12 MHz...

Lately i always seem to be on another tab (Memories or Favourites) when i need to quickly mute the audio briefly or for a while , so it takes to click the receive tab then the mute button , how about a extra button if possible somewhere that is...