It's all about the Software

Is it possible for SDRC to control (send band data) an external BPF like the OM-Poer OM6BPF ?

Hello,

I have a question about the general operation of how I/Q data is dumped for third-party software as specified in this section of the documentation:

I would need if someone uses this option please clarify a few questions I have:

From...

Anyone install and use this software on a Win tablet? Just ordered one with a i5 processor with 8 GB of ram. Am using a LAN IQ. Works good on my regular pc but like sitting in my recliner dialing through the frequencies. Am hoping I didn’t wast $400...

Hello:

Question: can I assume that the SDR Console won't recognize the hardware mute found on the 9 pin connector? My hunch is that you need to use the Elad SW2 software to access this hardware mute feature. Am I correct?

Thanks
Scott N1IA

Here is an attempt to find the best settings in SDRC by comparing WSPR decode performance. This is my test setup

Station setup at HB9VQQ.jpeg

First, I created a baseline to see how much the DX (Spots > 3000 km) WSPR decodes differ from each...

SDR Console v3.3 still needs MS Visual C++ 2010 and 2013 Redistributable kits.

MS Visual C++ 2010 and 2013 Redistributable kits are end-of-life products (EoL):

Only the MS Visual C++ Redistributable for Visual Studio 2015-2022 is supported by...

Greetings
For several years now, I have had solid performance and enjoying SDR Radio point and click capability with the Kenwood TS-990S / Airspy HF+ Discovery and the External Radio capability (thru OmniRig, of course). This is thru the LAN and...

Hi Guys, I am new here and to the SDR hobby but, I am a long time Radio Ham, G0EMJ.

The problem is that I have 2 SDR units, RTL-SDR and Nooelec NESDR SMART but, neither one of them will pick up a station on 105.4 mhz FM.
This is a station I listen...

Is there an ADC overload indicator in SDRC ?

Found information on this gem on radio reference a couple months ago. Am surprised not many folks have this. The waterfall display is what drove me to this. Was going to get a Chinese radio with a waterfall display but to many mixed reviews. Am glad...

New user as of today. Where do I go in v3.3 to change the audio output from default (speakers) to another destination? Also, is there a virtual cable that works well for connecting SDR Console to WSJT-x?
Many thanks for any responses!
Keith - ke4th

I have an odd question which may be quibbling but is more likely just me having an improper setting somewhere.

I am using the DX Cluster window, with spots on display above the waterfall. Now, ujsually when I go to a band in the default favourites...

Hello:

First let me say this is an AWESOME piece of software. I have a question: is there a place where I can set the received CW to exactly match my Kenwood TS590SG? I see I can change the filtering of course. But can't see where I can change the...

Anyone here use SDR Console with Malahit DSP2 radio? What is your experience with that combo?

Hi Simon:

I feel like I am asking for the moon to even ask for DX cluster spots to be added to the program. But is this possible, or no. This is the best world map I have ever seen for hams!

Thanks for creating this.

Scott N1IA

I am comparing RX path performance using WSPR according to this setup

GcqKWC4WwAAiYNX.jpeg

WSPR-compare.png

In SDRC I can see interferences (horizontal lines) it looks like splatter from a nearby station. I do not see any of these in SDR#...

Hello everyone

I would like to introduce you to a small project I am working on. I think that Simon's software is currently one of the most complete and I really appreciate the effort but I have always found it a bit difficult to manage the...

I greet everyone. I have the ts2000 connected to the sdr console via omnirigs, it works fine on the frequency changes. The connection is made via if 75925. and it goes to an rsp1a. as for the frequency, if I hear and see that they are talking, I...

Hi,

It would be useful to have the squelch command (the equivalent of the SQ command in the official Kenwood TS-2K protocol) supported in the serial cat protocol to be able to manipulate the value (read/write) in the same way that we have the AG...

Hi All

I am trying to find a way to solve an issue I am having,

My setup is a Adam Pluto Controlled by SDRconsole and I am running JTDX and JTsync on my PC

Now when I sync the time on the PC to the server I am seeing the FT8 stations have a dt...

hello
will be great if you can add a SA44B — 4.4 GHz Spectrum Analyzer

do you thing it is possible
thanks
and by the way i love sdr console

I would like to use sdr-console to tune into narrowband signals acquired by a Casper SNAP board.

So I'm looking for documentation on a suitable IQ data stream that sdr-console recognizes. The SNAP is set up to easily stream UDP, so I'm looking for...

I see a strong carrier with no antenna connected to the center of the span. How can I get rid of this?

SDRC.PNG

thanks

Has anybody tried running SDR Console on one of the Copilot+ PCs with a Snapdragon X CPU. I know it would only run in the x64 emulation, just wondering if there are any issues.

Hi All

I am trying to find a way to solve an issue I am having,
My setup is a Adam Pluto Controlled by SDRconsole and I am running JTDX and JTsync on my PC
Now when I sync the time on the PC to the server I am seeing the FT8 stations have a dt...