It's all about the Software

Any users of my system notice when this QRM started?
VERY broad banded, and effects all HF bands. Noticeable on ALL SDR's here at the QTH! :x
I have a hunch it may be a powerline insulator arcing due to the sound and width of QRM.

See the examples...

Thanks for SDR Console ! It is my favorite. I am using Pluto Plus which reportedly offers 60 Mhz bandwidth. My SDR v3 running on Windows 8.1 on 64-bit PC only allows 6 MHz. How can I utilize more bandwidth in receive-only mode ?

Due to thunderstorms in the area tonight. Will get back on air in the AM.
Stronger ones expected late in the day on Monday, so expect more of the same of shutdowns and disconnects of antennas.

73 Kriss KA1GJU
PS- My SO-239's were snapping after...

I'm currently running a HP Prodesk 400 G3 SFF, with a i7-6700 and 16GB ram.
A few years ago I was searching for a graphics card that would fit the SFF case, and ended up purchasing a Geforce GT 1030 2GB GDDR5 low profile card.
It was one of the few...

Hello Simon,

I am using SDRC together with a Pluto Version B. The firmware version on the Pluto is the one of F5OEO edition Perseverance.
I am also working with DATV via OBS - there I use UDP.
This is the line from the Logfile that is appearing in...

The HL2 gateware from v69 up supports ICOM AH-4 tuner protocol. It does require building two level convertor circuits on the back panel of the transceiver but that is the easy part. Before I run off buying some fet's and building the level convertor...

Bug? The long path seem to be anchored on the opposite side of the earth from the home location.

Nice to meet you everyone.

I was listening to FM stereo broadcast on SDR-Console v3.1 with headphones and noticed that the left and right sounds were reversed. Sounds normal on SDR# and SDR++. I thought I might have made a mistake in the settings,...

Hello,
I'm using a RTL-SDR as panadapter on my ic-756p2.

I have found several anomalus behaviour with External radio mode:

1) zoom level rest each time frequency is changed by radio vfo, the zoom level should be competely independent.
2)...

I am looking to use this online SDR but want to open it in multiple browser tabs, each tab set to a different frequency.
This is easy to do, but the difficult part is that I want to route the audio from each tab to a separate virtual audio cable...

Hello.

I've got an issue when transmitting while External Radio is active.
It seems the SDR Console detects external radio tx through CAT then mute and disable waterfall but the Auto Mute is disabled.
The issue happens only if External Radio...

Dear Simon,
Probably the best program is missing an option that will use the mouse wheel to zoom in/out and center the selected frequency.

To not loose the tune functionality, maybe tune when the mouse is on the waterfall, histogram or...

Good morning, guys but it is possible with the duo to activate a mechanical ptt (button) von the softwsre I'm not happy, thanks.

I own the original RX-888 and wondered what the differences are between that and the MK2? Basically is it worth the upgrade..

Thanks

Hardware:-
Hermes Lite 2 with firmware 72.8
Software:-
Windows 7 Home 32 bit
SDR Console compiled on 2022-04-12
Symptom:-
Maybe after one or two transmissions, on going to transmit, Hermes Lite relays chatter continuously, no transmit output. On...

I got the chance to buy an Elad-duo. After reading the sdr-radio website, it is still not clear what I could use to activate the PTT with a down to earth simple setup. Any suggestions?

73' Ron
ON2RON

Hello.

Can SDR Console exchange CAT information through UDP or TCP?
I am running SDR console for QO-100.
To logging contacts I'm running a CAT software that reads the frequencies from Console and send them to logging software. All connections...

Hi,
I am considering building a small, low-power system using this board:

I see that the Intel® Celeron® 6305E Processor has internal UHD GPU with OpenCL 2.0 support. The idea is to use this for remote monitoring over RDP. Do you think this CPU...

hi,

I have DIGITUS gigabit/USB3.0 adapter but I can not connect Pluto via USB to ETH... USB connection with Pluto works ok.
I try like on this video :

Pluto is visible by IP on local LAN ok.

Any idea ?

tnx info...

Dear,

simple feature to add in the External Radio Options menu, submenu Transmit.
Please add next to the Mute Audio checkbox a additional feature that will add extra time when the TX is going back to RX. There is some delay and I get very bad...

Having finally got round to finding where it is located I have to say this is a real game changer for checking for DX in the FM band. It took just over 3 minutes to load 5 hours worth of files at 1 line/sec resolution which can then be rapidly...

zoom function with external radio doesn't work in the right way, the signal move from the tuned frequency. changing zoom an offset on the sdr tuning about 1 kHz is applied.

In addition moving radio vfo change the zoom on the spectrum.

Tracking in...

Hello guys

I am building a MIDI VFO with rpi PICO and I send simpel note on and note off on 2 different notes
I can register them in SDR MIDI map se picture, but i can ONLY tune UP when I send TUNE down nothing happends

So i wonder what is...

Is there a way to get the map to fill the screen when maximized? Mine always has a black space to the right of the map.

When I expand the World Map, it leaves a border at the bottom of my display as seen in the capture below. Is there any way to move the informational text at the bottom of the World Map into that border area. The monitor I'm using is supposedly...