It's all about the Software

Hi,

I'm out of ideas, my pluto has an ethernet adapter and has worked through all versions of SDR console until the version bundled with the SDR television.I created new definitions as described but the program reports back no Pluto found at the...

Hi All,

I've realised after having my SDRplay in Console that the noise blanket does not work.

I switched to RX and TX on the radio and the NB was very good at removing the electric fence noisy on the common grazing area near my station....

I am not sure which driver to use for the SDR-Console to make efficient use of the Cuda Cores. NVIDIA App replaceed GeForce Experience and it is offering a choice between the Studio Driver or the Game Ready Driver. I don't understand the difference...

Is there something special about 256k BW and certain serial numbers (or firmware) that won't work?
Ref Super Station #5
Airspy #2 and #3 will not work on 256k, but Airspy#1 works 100%.
Just put v3.4 on the site (old W7 Netbook so it's 32bit machine)...

Hi all ..

First of all ...I love this software...
However i do have a problem in conjunction with my USB Audio card and ...my SDRPlay RSPDx R2 ...

It seems as if the audio buffer sizes vary ...so I mute the audio on TX and reduce the IQ by the...

Hello to all on the forum and apologies if I'm asking questions that have an FAQ somewhere I've not been able to find.

I be you can tell whats coming....

Okay, here goes! I'm not a computer type person (still use a paper log book), but I am...

Hello Simon.

I'm transmitting with SDR Angel / Hack RF and I'm trying to decode with RTL/SDR Dongle + SDR Television.

I'm well able to see the constellation but I have Incorrect PAT checksum and impossible to decode any images.

Do you have any...

Hello, running SDRC on a win11 Dell inspiron 16 plus 7620 with 32GB RAM. With a B210 USRP connected to the USB 3.1 port, I can get the 28MHz BW option to stream smoothly. CPU use is low and GPU use is maybe 30%. But, I cannot use the 56MHz BW option...

Hello, first, thanks for awesome software. :-)

Second, while using the Ettus B210, I notice that when setting the gain to a low value, the noise floor goes up, and when setting the gain to a high value, the noise floor goes down. Also, when...

Is there a way to configure the analog bandwidth setting and the sample rate setting for UHD devices independently? I'm using a B210 and the Bandwidth menu options cover a certain range of possibilities but not everything you might want. For...

Hi Simon,
Using Console 3.3. When using QO-100, I would find it very helpul if the Rx audio could be muted automatically when the Tx button is pressed. This would make for a much quicker change-over. Perhaps you could incorporate a tick box 'Auto...

Hello,

Been quite a while, so please put up with a very basic question.
Incredible softtwre program.

Am using with an Icom R8600.
In the radio's memories, I have stored about 20 Groups, each with a load of Channels

SDRConsole locks the radio up,...

Greetings.

Can I make another suggestion re: MIDI?

Can the Data Playback functions be added to the possible commands that can be mapped to MIDI?
Would only need to be the START, STOP, PAUSE, BACK/FORWARD (by x interval as previously set).

Being...

a friend of mine use sdr console and ic-9700 as external radio with 70cm
the offset on external radio iss 10057
rx works perfectly, but if he send on 432.700 he hear himselv on websdr on 10489.700.but never see his signal at waterfall at 10489.700...

Dear Simon,

to build a full radio with pluto (may be on a raspberry...) the only feature we need is the ability to move RIT via MIDI command.
It is necessary, for example, on the QO-100 where the correspondent is not always isofrequency and SDR...

Hello,

Blame this question, and the others I will undoubtedly have
on old-age . A really great excuse for most anything.

Back to using, and learning again, the program after a long time away from
due to medical issues.

Incredible program.

Am I...

I got a new laptop that runs Windows 11. However, the key that was the right Ctrl key is now the CoPilot key. I find this very annoying. I want the Ctrl key back.

The result of Googling on this issue results in the suggestion of installing...

Hello,

I decided to record my experimentation with SDR Television - and put it all together (a little disjointed but hopefully informative) for tonight's ATV net on VK3RTV

Its on my YouTube channel and here is the link to the video...

The...

Hello.

I'm trying to run DATV Television app on two different PC but it doesn't start.
One PC is running Windows 10 and the other has Windows 11 and the Television app was installed at the same folder (C:Radio\SDR-Radio.com (V3)) of SDR Console on...

Hello,
Which firmware should I use for the LibreSDR and the new DATV software?

73 Thomas DL5BCA

I tried opening additional receiver windows to run different SDRs, but instead of additional windows opening, additional columns with different colors appeared on the same screen. Now, I can't seem to figure out how to close any of them or open...

Hi all
I need to re-install SDR Console on a new computer.
Is there a config file that I can transfer from one computer to the other so I do not have to spend hours reconfiguring ? If so, how is it named, and where is it located ?

TU + 73
Paul F6EXV

Hi Simon,

I love your World map, and especially the auroral overlay.

Can you expand briefly on where the overlay draws its data from? The auroral overlay seems to be a little bit expanded over the familiar NOAA's latest visual map. Possibly you...

Hi Simon,

Greetings from VK3

Been following your SDR Television development - great to see your beta release.

Unfortunately we don't have access to QO100 from VK - but we are active on the local ATV repeater which is VK3RTV.

We have a NET every...

Would it be possible to add support for 2MS/s transmissions (repeater outputs) please?

very best regards,

Justin - G8YTZ