It's all about the Software

hello, I have a little problem with SDR SERVER MANAGER, I can connect but with one (1) person maximum, it is impossible for 2 or 3 to connect to this sdr server, I opened the ports, etc. everything works well, but the problem is when 1 person...

Hello,
This is my first post and I'm not sure if this is the right place...

A quick intro. I'm a radio amateur, vk2ezf, licenced for 50 years, ex IT professional, and have been using various SDR software for a number of years. But only just came...

One of SDR Console's many fine attributes is the ability to read files recorded by Jaguar software (for the Perseus) at the 1600kHz sample rate.

Background: Jaguar can record at the Perseus' software's standard 2000kHz rate, but a separate 1600kHz...

Hi,

I am trying to interface the SDR Console V3.3 with Log4OM2.

I am not succeeding to get the VFO & mode information to the Log4OM2 application.

Log4OM2 works fine with my FT991A.

An suggestions as to how to get this fixed?

Thanks
Ravi

Is there a How To to enable Win4Icom rig controller to play nice with Console plus my IC-7100? I already have the 7100 connected as an External Radio in Console in addition to my RSPdx via OmniRig. New Consle user; like it a LOT.

I see we can create 8 receivers but only have FA-FF (6) commands for set/get frequency. Can we get FG and FH added?

Hi.
It will be very practical an option to send Analyzer>crop window parameters directly to data file editor to extract one or more signals from a wideband file.

Best regards.
ANgazu.

Hello anyone,

I'm new with this software.

Is it possible to display FT4, FT8, etc... signal on Simon's Map ?

Thank you for the info.

Francois
VA2RC

Hello,

i am using the favourites list windows very often . I also have a long list of favourites which i am going thru daily ( intruder monitoring ) . It would be superb if i could use the keyboard ( enter ) to activate the current line. I can...

This is the scenario: I'm using an IC705 for transmit/receive on Es'Hail-2. I have a Lime SDR attached as an external radio to enable me to monitor my transmit signal via the satellite as required. The Lime tracks the Icom OK.

However, my transmit...

Helllo, recently tried out the MIDI functionality which is really nice. Thanks for that. I have found that if I make a slider for volume control that has a range of 0 to 127, the software detects it properly and sets the values in the midi config...

I use a home built MIDI controller and it really makes my life so easy when working contacts on QO-100 with the Pluto and SSB contacts on the Hermes-Lite2 while sitting back and talking. It will be so awesome to have RIT on the MIDI controller then...

Hi I have purchased a new Aaronia SPECTRAN V6 ECO 150XA-6. The latest SDR Console said can support SPECTRAN V6 (but not sure if is only V6 or both the V6 and V6 ECO) by SDK, I tried that on the V6 ECO, looks like it can see the hardware and detected...

When I try to connect to bladeRF v2 in SDR console please wait appear and then I see crush report.

crash report:

Hello, struggling on connecting Prosistel D controller to show antenna azimuth on Simons map. The controller is connected to PC via USB and creates port. The rest is unclear how to connect to the map. Have been using Yaesu rotator successfully...

Hi, first of all,sorry didnt read the whole forum!
Is it possible to implement Flrig for controlling external radio.
Im switching from Port cloning and using hrd and omnirig to flrig.
But now not possible to change frequency by clicking waterfall...

Had a bad case of Sciurus carolinensis or Tamiasciurus hudsonicus!
Grey squirrel or Red squirrel decided to chew on the insulation, and wires of the antenna about 4' from the 9:1 unun. Both ends were stripped about 2 so I wrapped the two back...

Hi
I hope you forgive my ignorance.
To use SDR console on a Windows PC to control a raspberry pi 4 with 1 RTL-sdr dongle, what do I need to install in the raspberry (drivers, software, etc.) ?
Many thanks in advance
Regards

Hi,

On SDR-Console V 3.3 when I try to select Hermes Lite 2 in the Search option, I am given the below option

-> Default
-> Extended
-> Fixed Address

But when I select the option of PlutoSDR in the search option,I do not find any of the options...

SDR Console has been working flawlessly until today when a Windows update installed. Now SDR Console will run only a minute or two then freezes, accompanied by the disconnect sound ding. I can click on the stop button, wait a minute or so, then...

Hello,
I am using sdrconsole for the QO100 operation successfully.
I have linked my external radio and the SDR console shares the frequency information on 70cm to my rig.
On the SDR display I see the 10.489 frequency as it is used on the satellite....

So when I reboot the PC that the server is installed on, the system status comes up on-air-services unknown
To get things to work I have to stop the service in the server manager and then restart, and then everything works fine.
Now if I reboot...

zoom function with external radio doesn't work in the right way, the signal move from the tuned frequency. changing zoom an offset on the sdr tuning about 1 kHz is applied.

In addition moving radio vfo change the zoom on the spectrum.

Tracking in...

So gentlemen,
I can not find an answer in FAQ's on this issue, so I would like to ask the many users with far more knowledgeable and experience with SDR Console a seemingly simple question.
With both a CW Transmit mode and the ability to generate...

I have been figuratively banging my head against the wall trying to find software that lets my Hack RF One transmit. This SDR console looks promising but I can't seem to get the Transmit option to work. Receive works fine.

I am really hoping...