Sounds like your dish is not totally aligned.
How does SDRC calculate the SNR?
Search found 37 matches
- Mon Jan 25, 2021 2:41 pm
- Forum: Pluto
- Topic: QO100 beacon signal level
- Replies: 13
- Views: 3214
- Sat Jan 23, 2021 1:02 pm
- Forum: Pluto
- Topic: QO100 beacon signal level
- Replies: 13
- Views: 3214
Re: QO100 beacon signal level
I re-aligned the dish and lnb and tried other lnb's and now have a snr of 20-23dB. This is better than it was but I can't get any where near the 30dB others have mentioned.
Thanks to all.
Thanks to all.
- Fri Jan 22, 2021 9:13 am
- Forum: Pluto
- Topic: QO100 beacon signal level
- Replies: 13
- Views: 3214
Re: QO100 beacon signal level
Alan
Fair comment. The Goonhilly snr is about 18dB and my Pluto is about 10dB.
What do others get?
Fair comment. The Goonhilly snr is about 18dB and my Pluto is about 10dB.
What do others get?
- Thu Jan 21, 2021 2:33 pm
- Forum: Pluto
- Topic: QO100 beacon signal level
- Replies: 13
- Views: 3214
QO100 beacon signal level
Can anyone tell me what signal level to expect from the PSK beacon on QO100 via Pluto and SDRC?
At the moment mine seems quite low at -112dBm or S2 but listening via the batc Goonhilly sdr it is about s9+10db. I am using a 90cm dish and 0.1 lnb.
Thanks
At the moment mine seems quite low at -112dBm or S2 but listening via the batc Goonhilly sdr it is about s9+10db. I am using a 90cm dish and 0.1 lnb.
Thanks
- Tue Jan 19, 2021 9:36 am
- Forum: Requests
- Topic: Tuning bar visibility
- Replies: 0
- Views: 256
Tuning bar visibility
Could the "visibility" of the tuning bars be made adjustable? I use the bars on the DSP IF display to home in on the received signal but the bars tend to disappear into the noise. Perhaps others do this in another way?
- Sat Nov 28, 2020 3:14 pm
- Forum: Pluto
- Topic: PTT via Pluto GPO pins
- Replies: 13
- Views: 4000
Re: PTT via Pluto GPO pins
GPIO config not found, see screen
- Sat Nov 28, 2020 2:41 pm
- Forum: Pluto
- Topic: PTT via Pluto GPO pins
- Replies: 13
- Views: 4000
Re: PTT via Pluto GPO pins
Where do I find this?
- Fri Nov 27, 2020 5:17 pm
- Forum: Pluto
- Topic: PTT via Pluto GPO pins
- Replies: 13
- Views: 4000
Re: PTT via Pluto GPO pins
Hi Simon I downloaded the 0.31 firmware from: https://github.com/analogdevicesinc/plutosdr-fw/releases/tag/v0.31 Installed it and checked the version using putty. No PTT via GPIO on TX. I then re-installed the DATV firmware from F5OEO and confirmed that PTT on TX was still working. I have a relay da...
- Thu Nov 26, 2020 8:49 pm
- Forum: Pluto
- Topic: PTT via Pluto GPO pins
- Replies: 13
- Views: 4000
Re: PTT via Pluto GPO pins
Are you sure it worked on 0.31?
- Thu Nov 26, 2020 3:19 pm
- Forum: Pluto
- Topic: PTT via Pluto GPO pins
- Replies: 13
- Views: 4000