It's all about the Software

Sounds like your dish is not totally aligned.

How does SDRC calculate the SNR?

I re-aligned the dish and lnb and tried other lnb's and now have a snr of 20-23dB. This is better than it was but I can't get any where near the 30dB others have mentioned.

Thanks to all.

Alan

Fair comment. The Goonhilly snr is about 18dB and my Pluto is about 10dB.

What do others get?

Can anyone tell me what signal level to expect from the PSK beacon on QO100 via Pluto and SDRC?

At the moment mine seems quite low at -112dBm or S2 but listening via the batc Goonhilly sdr it is about s9+10db. I am using a 90cm dish and 0.1 lnb.

Thanks

Could the "visibility" of the tuning bars be made adjustable? I use the bars on the DSP IF display to home in on the received signal but the bars tend to disappear into the noise. Perhaps others do this in another way?

GPIO config not found, see screen

Simon G4ELI wrote: ↑Fri Nov 27, 2020 5:29 pm Please attach your GPIO configuration window.

Where do I find this?

Hi Simon I downloaded the 0.31 firmware from: https://github.com/analogdevicesinc/plutosdr-fw/releases/tag/v0.31 Installed it and checked the version using putty. No PTT via GPIO on TX. I then re-installed the DATV firmware from F5OEO and confirmed that PTT on TX was still working. I have a relay da...

Are you sure it worked on 0.31?

https://github.com/analogdevicesinc/plu ... -v0.32.zip

Thanks