It's all about the Software

The satellite Automatic Schedule sometimes does not switch to the frequency for the next satellite on the schedule. Sometimes it switches to the frequency defined for the satellite using Organise but sometimes it does not switch to that frequency. Since I am only recording the three NOAA satellites ...

The problem of the wrong frequency in the Automatic Schedule occurred again this morning. When I turned on SDR Console, the waterfall and the spectrum came up centred on 137.6200 MHz (NOAA 15). The Automatic Schedule and the Enable Tracking were on by default. The next satellite pass was shown as NO...

The satellite Automatic Schedule seems to be ignoring something else. Sometimes it switches to the frequency defined for the satellite using Organise but usually it does not switch to that frequency. Since I am only recording the three NOAA satellites on 137.1, 137.9125 and 137.62 MHz, the 2 MHz ban...

I'm looking forward to 3.0.26 but I just noticed a problem that I just became aware of in 3.0.25. With the minimum elevation set to the current maximum value of 20 degrees, the Automatic Schedule shows only those passes with an elevation > 20 degrees. But all passes above 0 degrees elevation are rec...

Simon, as you requested in the Groups.IO forum: Currently 20 degrees is the highest minimum elevation that can be selected for recording passes. A higher minimum elevation would be useful in several situations: 1. Low gain antennas or low sensitivity receivers may require higher minimum elevations. ...