It's all about the Software

Possible update in last 48 hours? Super Station #4 was getting the 10 second time out warning. Apparently W10 decided to change the status of the port it was listening on and blocked it via Windows Firewall. Re-enabled and refreshed, all is well in...

I use my SDR as both an enhanced panadaptor for my IC-7300 and as a second receiver. I don't want tracking enabled much of the time - I'm using the two receivers separately. I will watch the SDR waterfall, looking for something of potential...

Hi!

Version 3.1 2365 using Windows 11 Intel 10700k NVidia 3070 has no effect when activating noise filters. This was also in the non-beta version 3.1.
Most other functions except Notch on as the filter bandwith, etc work nicely. I have used it on...

Hi wonder if anyone can help.
I have HRD set to com3 and rig control is good. I set 3rd party rig control to com19 using virtual ports com19/20.
I then set SDRradio omnirig to connect to com20 and set track radio. SDR radio in the external radio...

Hello, friends...

I learned yesterday that one of my favorite DX tools (quite literally named DX Toolbox) has CAT commands implemented using the Kenwood TS2000 protocol and therefore can tune your receiver using SDR Console. It is not immediately...

I looked thru the list of requests but it was so long...

Can you create a dark theme if you haven't already? also, P25 and DMR, will you ever allow audio? I can decode it but cannot get any audio.

I noticed a slow degradation in #1's RXR's... needed more and more visual gain and pre-amp.
Found that one of the dozen Sciurus carolinensis (Grey Squirrel) had chewed on the insulation of the antenna wire, exposing the wire to the weather. The flat...

While trying to connect locally (LAN) receiving a read failure message.

The log looks like:
2021-09-23 13:29:08, OnAir> On-Air Sent 540 bytes to status.sdrspace.com:50199
2021-09-23 13:29:08, OnAir> On-Air Reply = OK
2021-09-23 13:29:13, Listener>...

For the SDR Console suggestion box:

1. Please consider expanding the Visual Gain setting. Currently it goes from +30 dB to -40 dB in 5 dB steps. I'd like it to go down to at least -75 dB in 3 dB or finer steps. That would allow me to approximately...

As a Satellite operator
I Want to have the possibility to control the External radio in the Satellite windows with Midi controller and keyboard shortcuts
So that I do not need change the frequency of the connected TX radio with the mouse at the...

Hi Simon,

After editing about 50 FAV entries in a row the FAV ADD, UPDATE and Organizer buttons don't response anymore.
The buttons EXPAND, + and - are still working.

It also takes a very long time before Markers/Config opens.
After stopping the...

Could we have a cut-off timer that clears the RDS data and completes the database entry if the RDS is no longer clocking up 'hits'? I would suggest a default value of 30 seconds as a compromise so that a rapidly changing signal doesn't trigger too...

Could a labelled crosshair cursor be available in the Signal History window, just as there currently is in the main Analyser window? Without it, it’s difficult to find the exact value and position of a peak.

Thank you,

Jack
M0GKC

SO2R implementation with SDR Console:

- two Identities for two independent SDRs such as two ANAN or Hermes Lite etc. as Radio 1 and Radio 2.
- SDR Console would connect the serial port of virtual serial cable back to logging program (N1MM etc.) -...

Hi Simon and others,
The satellite scheduling works well and I would like to use it 24/7 even when I am away for a few days.
What I find lacking to achieve this is the ability to change antennas for the different satellites.
I have three antennas,...

Hi all,
I recently took a trip to a more remote part of Virginia in the USA to make some IQ recordings to potentially capture some meteor scatter on the FM broadcast band. For the most part, mission accomplished! I used the Airspy v2 and SDR...

Would be great to add support for Signal Hound Analyzers, to be used as an receiver.
Depending on model it can go up to 20GHz.

Hi,

I'm not sure I have this right.
Will blame it on old age now if I am, as usual, a bit confused.

A long time back I think there were some Posts about the development
of:
additional digital modes right from the program

and of a stand-alone...

Is it me or is the banner looking a little outdated?
{o.o}

Hi Simon,

When adding/edit Favourites they are not automaticly added/changed in the FFT (as a marker).
To activate every change one have to go to View, Markers, Marker Config, uncheck Fav and check Fav again. A bit cumbersome that way.

Is it...

Hi Simon -
Playing with some more SDR radios...
My preferred platform is your SDR Console V3.1 for my Elad FM-DUO and HL2. Anan coming next...my poor 101D is quickly taking a backseat to wanting your GUI - hence the Anan....

I have in the mean...

Would it be possible to add markers (favourites, etc) at the top of the Analyser window? Perhaps as an optional sub-window at the top or something?

Good for analysing for beacons etc.

Thanks !

I have mentioned this request in general conversation, but don't remember putting it in the right place, so I shall do so now that 3.1 is released...

Currently, double-clicking an entry in the RDS log brings up an editor window with possible...

If audio pops & clicks are heard it may be necessary to re-enter the setting in Options-Audio-Buffering by changing it and/or restoring it to it's original setting. That seemed to correct a serious case of audio popping that occurred after...

hello Simon
i have a few plutos here (modding them for others) ... when i start one pluto (my main unit) that has no ppm correction or start a different one (that need a correction of as example) -0.2ppm i have to correct the ppm value each time by...