It's all about the Software

Hi

Congratulations, SDR Console is amazing.
I use it for long time on QO-100.
I tried several other SDR programs and SDR Console is by far the best one.

I would like to request a feature. And a sub-feature.

I have 2 SDR receivers connected to the...

May have power outages tonight, so my local servers may be down (Superstations1-4) while I power up the diesel generator and put everything back online. May have lots of static crashes due to lightning currently offshore as well, so 160m will be...

I've been playing with the RX88 MK II I now have. As it stands the main window zoom feature is useless. It always expands around 16 MHz. (Where's 128 ksps or better user settable sample rate?) I can fool it by setting the nonexistent LO frequency to...

Dear Simon,
I would appreciate ON/OFF options for Dither and Random, as they are available for RX-888 (Receive > DSP > Radio).
SDR Console is my favourite SDR UI; thank you very much for your great work and effort!
Walter HB9AJG

Hi Simon,

One of my equipment configurations in my shack is running my Airspy connected to a buffered IF tap on my FT890. The FT890 upconverts to a 70.455 MHz. This gives me multiple receivers and the benefit of the waterfall.

Because I upconvert,...

I manage to connect my radio via omnirig and display follows in external radio but RX SDR does not follow the frq of my TX

I see receiver Commradio CR-1a support on screenshots on the site, but cannot find it in the program. May support be discontinued?

Possible update in last 48 hours? Super Station #4 was getting the 10 second time out warning. Apparently W10 decided to change the status of the port it was listening on and blocked it via Windows Firewall. Re-enabled and refreshed, all is well in...

I use my SDR as both an enhanced panadaptor for my IC-7300 and as a second receiver. I don't want tracking enabled much of the time - I'm using the two receivers separately. I will watch the SDR waterfall, looking for something of potential...

Hi!

Version 3.1 2365 using Windows 11 Intel 10700k NVidia 3070 has no effect when activating noise filters. This was also in the non-beta version 3.1.
Most other functions except Notch on as the filter bandwith, etc work nicely. I have used it on...

Hi wonder if anyone can help.
I have HRD set to com3 and rig control is good. I set 3rd party rig control to com19 using virtual ports com19/20.
I then set SDRradio omnirig to connect to com20 and set track radio. SDR radio in the external radio...

Hello, friends...

I learned yesterday that one of my favorite DX tools (quite literally named DX Toolbox) has CAT commands implemented using the Kenwood TS2000 protocol and therefore can tune your receiver using SDR Console. It is not immediately...

I looked thru the list of requests but it was so long...

Can you create a dark theme if you haven't already? also, P25 and DMR, will you ever allow audio? I can decode it but cannot get any audio.

I noticed a slow degradation in #1's RXR's... needed more and more visual gain and pre-amp.
Found that one of the dozen Sciurus carolinensis (Grey Squirrel) had chewed on the insulation of the antenna wire, exposing the wire to the weather. The flat...

While trying to connect locally (LAN) receiving a read failure message.

The log looks like:
2021-09-23 13:29:08, OnAir> On-Air Sent 540 bytes to status.sdrspace.com:50199
2021-09-23 13:29:08, OnAir> On-Air Reply = OK
2021-09-23 13:29:13, Listener>...

For the SDR Console suggestion box:

1. Please consider expanding the Visual Gain setting. Currently it goes from +30 dB to -40 dB in 5 dB steps. I'd like it to go down to at least -75 dB in 3 dB or finer steps. That would allow me to approximately...

As a Satellite operator
I Want to have the possibility to control the External radio in the Satellite windows with Midi controller and keyboard shortcuts
So that I do not need change the frequency of the connected TX radio with the mouse at the...

Hi Simon,

After editing about 50 FAV entries in a row the FAV ADD, UPDATE and Organizer buttons don't response anymore.
The buttons EXPAND, + and - are still working.

It also takes a very long time before Markers/Config opens.
After stopping the...

Could we have a cut-off timer that clears the RDS data and completes the database entry if the RDS is no longer clocking up 'hits'? I would suggest a default value of 30 seconds as a compromise so that a rapidly changing signal doesn't trigger too...

Could a labelled crosshair cursor be available in the Signal History window, just as there currently is in the main Analyser window? Without it, it’s difficult to find the exact value and position of a peak.

Thank you,

Jack
M0GKC

SO2R implementation with SDR Console:

- two Identities for two independent SDRs such as two ANAN or Hermes Lite etc. as Radio 1 and Radio 2.
- SDR Console would connect the serial port of virtual serial cable back to logging program (N1MM etc.) -...

Hi Simon and others,
The satellite scheduling works well and I would like to use it 24/7 even when I am away for a few days.
What I find lacking to achieve this is the ability to change antennas for the different satellites.
I have three antennas,...

Hi all,
I recently took a trip to a more remote part of Virginia in the USA to make some IQ recordings to potentially capture some meteor scatter on the FM broadcast band. For the most part, mission accomplished! I used the Airspy v2 and SDR...

Would be great to add support for Signal Hound Analyzers, to be used as an receiver.
Depending on model it can go up to 20GHz.

Hi,

I'm not sure I have this right.
Will blame it on old age now if I am, as usual, a bit confused.

A long time back I think there were some Posts about the development
of:
additional digital modes right from the program

and of a stand-alone...