It's all about the Software

I don't see an option to get the SSB medium under receiver. What do I need to do to get this?

Thanks

The Fusion 13 option doesn't work so well and this is on a 2021 Mac so it's fairly fast. Lots of pops etc and slow. Never did get the receiver panel to show SSB. Audio very poor on FM. The box to set configuration wasn't consistent. Maybe Parallels...

RSPdx , after it was sitting around for a month or so unused , i plugged it in and fired up sdrc and the noise floor indicator needle was at a 8 and the s-meter needle was stuck at a S-9 and nothing i did (adjusting rf-gain/if gain) would get them...

I came across this splitter the other day (i'm not associated with them) , i need one for the FT-2000 and the Rspdx using the rear in/out and rx button on the 2000 .

One is turning up in a few days , it looks nicely made with input protections ,...

Hi all , is there a ExtIO for the RSPdx and spectravue? , i have spent several hours looking about and no luck so far , no real reason or urgency btw as sdrc and uno are just fine but i would just like to try spectravue just because :roll:
cheers...

Hi all , is there any issues known about leaving the SDR plugged in to USB at all :?:

I have been lately leaving it plugged in on shutdown on win10 (after closing the software) , its on a port that does not have continuous power enabled and then...

Hi all , whilst nothing can be protected by a direct lightning strike (Millions of Volts and Thousands of Amps) and i always nearly keep a eye out for any storms in this area that might be coming way before one can hear any thunder btw , so i...

I noticed in v3.3 that under SDRplay there is only V2 and V3. What should be selected for RSP1A receivers? The reason I ask a person using the latest Windows 11 update is having trouble getting SDRconsole v3.3 to find his RSP1A. With the latest...

Hello,
My name is Peter and I have been a radio amateur with the call sign DO1PH for 2 months.

I have a problem with the SDR console working with the SDRplay RSPDuo.

I monitor with the RSPDuo 2 pan adapter (1st IF 38.85MHz for 2m, 2nd IF 46.35MHz...

After updating SDRUno for the heck of it, I noticed that the SDR Console waterfall would freeze but the radio still played. Stopping and starting SDR Console would not fix the frozen waterfall. You would have to close and reopen the SDR Console...

Hello there,

Can anyone help please . My Rspdx and sdrplay are failing to start also my rtlsdr v3 takes ages to start as well now. Using 3.1 2320 buld. Have uninstalled and reinstalled still the same. sdruno works fine with rspdx and sdrplay....

Hi,

I am using 3.1 build 2418 and having just recently purchased an RSP1a, it appears not to want to start. To get it to do, so I have to restart my WIN10 PC and then it will do so. When I first turn on the PC or if it has been on for a while,...

Thanks for the software Simon, which I have used daily for many years. I have loaded the SDRPlay 3.08 service in conjunction with SDRUno 1.41 beta and the latest SDRC version 3.1 build 2340, which I believe should run with API 3.08. When I try to...

When using the RSPsx in HDR mode if i try to center the frequency in goes back to normal mode.
Have to but it back in HDR mode every time after using the center button on the drop down beside zoom.
Only ME?

The latest SDR Console V3 test kit (August 17th 2020) failed tonight when using the V3 API. . Attempts to select the SDRplay RSPduo yielded a frozen screen. So, I uninstalled the kit and removed the SDR Console V3 entries in the registration file....

SDRuno 1.40.1 installs their V3.07 API. SDR Console is looking for V3.06. It there a timeline for SDR Console to be able to use the V3.07 API?

I hear the intended signal clearly plus many other signals that are dozens of Khz away, well outside the passband of my receive filter.

I have a dipole, so most signals are not very strong or overwhelming.

Frequency: any
Mode: any, but effect...

I just realized I can hear out-of-band signals even when the receiver is muted, like if I was hearing a swath of IF spectrum all the time.

Hello to all:

I am a new user and very happy to find this forum.

I am in need of some help with regard to distorted audio when using an SDRPlay RSP Duo with SDR Console. SDR Console is a great software program and I have friends who use it very...

Gentlemen,
I'm trying to run RSP1A as a remote receiver that I want to operate using SDR Console, I used this tutorial ( ) but unfortunately my RSP1A is not detected by Virtual Here Client ... do you have any idea what the problem could be? I'm...

Hello Community,
I am still on the way to switch from SDR Uno to SDR console because of connecting my FT 817 to sdr console.
In order to see how sdrc works I made a simple setup.
1. Rspdx on sdr uno
Signal generator set to -40,2dBm, cable and...

Hello, as in the photo I have attached, I would like to set a listening range that goes from 26 mhz up to 28, but despite the fact that it seems to me that anyone who connects to my server goes where he wants. how can i solve? thank you

Apologies if this has been asked before - when I select HDR mode on the main panel as soon as I then try to zoom or center the received frequency on the spectrum it immediately reverts the Rx back to non-HDR mode. Using SDRUno this doesn't seem to...

Hello,

Have a few basic questions re the HDR Mode with a RSPdx, please:

Asking, as I seem to be having contradictory results, and it's obvious that I really
don't have a firm understanding of using it, and/or making it active.

a. That you can...

hi, I have an rsp1 sdrplay connected on the 1st IF at 69.0115mhz of the 706mk2g in panadapter mode.
With hdsdr I have the possibility to insert the IF in the front-end Rf section (see image)
the value of the IF and have the rx synchronized and with...