It's all about the Software

I am trying to locate Omnirig 1.19. Every site I go to has 1.12 or v2. Does anyone have a site from where to get v 1.19? Thanks!

I had to make a forum account just to tell you that your software doesn't work... at all.

I have no idea what my frequency is, even though I can change it. I can't decimate. There's no way to change from LSB (which is apparently the default?) to...

My RF-Space SDR-IQ does not seem to like SDR Console or vice-versa! I'm posting to see if anyone has any ideas. The radio works just fine with the manufacturer's SpectraVue software, yet it will not play under SDR Console.

Here is the radio...

I'd like SDR Console to track my FT450 that I use for 6m digital work
Sdr Console reads an RTL whereby the signal from the yagi has gone thru an LNA.

Trouble comes when the FT450 is run by FLRig, which is not selectable as an external radio....

I have made an Arduino Micro-based midi controller for my HL2 running v. 3.0.24 SDR-C. It works very well; however, I don't seem to be able to get the pot to ever set to the AF Gain to 0 . At it's minimum, the pot will only set the AF Gain down to 1...

Hello everyone, I am trying to resolve what to my is a mystery. Have a new RTL2838UHIDIR and the audio from SDR console V3, the latest one that I took yesterday, is always distorted. Whether I use SSB or Broadcast FM (yes I do know the difference),...

Hello,

For anyone with a G-31 using on Console:

Would be very interested to hear any comments re the pros and cons
comparisons between a WinRadio G31 Excalibur, and:

SdrPlay RSPdx (other than freq. range)

Airspy HF+ Discovery

Which of the three...

Want to find out the best way to unscrew myself.

I saw the obscure core isolation virtualization, memory integrity security feature in Windows, thought I'd try it out. Got warnings of incompatible drivers, found several copies of msi2500.sys in...

Hi,

Was wondering:

Is there any clever way when looking at the Spectrum View at a particular waveform (in my case, often corrupted with noise, etc.)
to determine if it is USB, LSB, or am ?

Bob

Just a question out of curiosity. What is the programming language of SDR console?

Anyone any idea?

How can i change the dbm steps in Spectrum?
At the moment there are only 5db steps, i wwould like to change to 10db

Over the last few days I have added a Diamond Discone Antenna which was initially performing well with Console when in my basement. Now the discone is mounted on the roof. But gradually, sensitivity seems to be very much deteriorated. One station in...

I know I did this before but for the life of me, I cannot remember how I did it. I am trying to HIDE the above controls which appear whenever one moves the mouse across the Panadapter window.

There was a setting somewhere which allowed me to...

Hi,

Am I correct that upon closing the program, and re-opening it, the positions, and geometry of the various windows, etc. should come exactly back ?
Any caveats ?

Or, is there something that has to be done (first) to enable this ?

Thanks,
Bob

Does HackRF support transmit? Receive is working but transmit is disabled.

Thanks
Mike

Hello group,

I'm almost embarrassed to ask this, but how do I scale the top pane in order that the S meter is not obscured?

Not sure of what I did today, but after almost 2 hours of searching, I have been unable to resize.

The top display is what...

I've been trying to do lots of testing before coming with this to the forum, just in case I am being stupid, but I don't think I am.

I prefer SDR Console to other apps - it consistently allows me to listen to signals louder and clearer than other...

Hello,

Re the menu that comes up when going to:

Home/Frequency that allows you to enter Frequeny AND Span.:

Any way to have it stay on the screen permanently, rather than having it disappear after entering any new values ?

Thanks,
Bob

Hello,

Regarding the site: Short-wave Info. is there any way to incorporate and use in Console as a freq. lookup which
is done automatically (like in SDR#) ?

Other than CSVULB, and Console's (excellent) Markers, anything similar ?

(should this...

I use these when monitoring, but if I choose to scroll through the spectrum using the ‘2 arrows’ on the left or right at the bottom, and then want to use a keyboard shortcut, they won’t work.

I then have to stop and start the software to make them...

I see I won't be getting much help. That's a shame, as it was my favorite sdr software but I'm not going to reformat a computer to use it.

Hi all,
I recently took a trip to a more remote part of Virginia in the USA to make some IQ recordings to potentially capture some meteor scatter on the FM broadcast band. For the most part, mission accomplished! I used the Airspy v2 and SDR...

Hi friends,

Is possible to decode DMR / there are some tutorial about this ?

I´m new here / with SDR Console, sorry if this question was already answered (i have made a search in this forum but with out results about DMR )

TKS !

73's

marcelo -...

Hello my name is Sascha!

I have 2 questions about sdr-radio software.

1. Is it possible to choose soundcard line in or mic for receiving vlf signals directly via soundcard?
2. When I use a upconverter it would be nice to configure the software to...

Hi,
Thanks for a great s/w tool, I have been able to get tx as well as rx to QO-100 working and learned a lot along the way.

My rx set up is:
pluto -> 1m patch lead ->bias T -> 25m satellite coax -> sat finder -> 1m patch lead -> 4 channel Octagon...