It's all about the Software

Many thanks for providing such an excellent and useful application.

The DSP mode Wide-U is of great use to me. In this mode one may set a bandwidth of up to 48kHz (F0 + - BW/2) and record the resulting signal as a file in *.wav format.

Questions...

Hi All - new user here...

The Goal -
1) Use a CAT control serial input to adjust the received frequencies of ALL RX's to compensate for Satellite doppler.
2) Waterfall should show a straight line for a dopplered passband signal(s) (meaning that...

Up until the April build of SDR Console I've always been able to play recordings made in V2. Was it intentional to remove the ability to playback these files in the latest public build released in April? Luckily I still had the install file from the...

My question is about how to turn off the display in Windows while SDR-Console is running. I have had this issue with both Windows 10 and Windows 11. If SDR-Console is open, Windows will not turn off the display after X minutes (whatever is set)....

Should I expect to see a slight loss in sensitivity and RDS decoding when recording WAV RF64 files at 16 bit from my Elad S3 at 24MHz width?

A couple of times now I've had complete PS decodes on live reception (and the matrix works very well for...

Hello!

My goal is to log QO-100 contacts with Log4OM. I do both TX and RX with an Adalm Pluto.
I'm wondering if it is possible to link the frequency and mode from SDR Console to Log4OM with the help of K5FR's VSP Manager and Omnirig?
I tried...

Hi all,

Hope someone can help me try and work out what I have not done.

I use SDRConsole for FMDX. I have a Remote Station and my new portable station. When playing back IQ files from an opening on my remote station, my playback window is a...

Hello everybody, it a pleasure to meet all of of you! since I am a beginner I would be interested in using my rx SDRPlay mod. SRP1 with SDR Console ( at the moment i use that software with SDR-RTL V3, Elad ,Icom IC-R8600 and RSP Duo but not with...

hi all,

I can able to here plain voice in both SDR console and SDR sharp software. But while listening to the scrambled voice in SDR console I am facing lot of difficulties. By checking Inversion of spectrum option in SDR Sharp i can able to hear...

Is it possible to use the zoom slider while I am recording an IQ data file?

I have an Airspy HF+ Discovery with a maximum bandwidth of 912 kHz. I would like to start SDR Console recording an IQ data file of the medium wave band and while it is...

Hello Everyone,

My SDR console stopped working back in February, Since then, I reinstalled the old version multiple times without result. I also uninstalled and reinstalled with same result. Downloaded the latest version (January 22) with no luck....

I am having problems editing a 14 hour recording of the entire medium wave band. I was wondering if the file size (234 GB) is excessive and contributing to the issue.

Later in the year I intend taking the SDR on a DX trip, leaving it to record all...

I am experiencing what sounds like low frequency audio clipping with crackling and popping in the audio.

It's evident when listening to either HF or the medium wave and FM broadcast band and in most if not all modes and bandwidths.

I have tried...

I am trying to set up DSDPlus but can't find my DSDPlus executable file.
I searched my system with no luck. anyone have any suggestions ??

Can one use Multiple SDR's with Multiple instances of SDR Console on one computer? If it can be done How?

Scott

Hello,
i want to use an 5V usb relay for to control a coaxrelay and the Power amplifier.
Type:
USB 5V Relay 2 -Channel Programmable Computer Control For Smart Home.
Windows detected (sorry in german) the device as:
Der Prozess zum Hinzufügen von...

I've been trying to understand how to set up SDR Console with my RTL-SDR dongle. Like any man, I hate asking for directions - and so I tried Google to find a definitive answer. Problem is that I find several articles on this topic, but most seem...

What file do radio settings get saved in? For example, I am having an issue with Radio A and I delete it from my definitions so I can reinstall from scratch. Are there some old settings I need to delete too?

I am just getting my feet wet into SDR.

Using SDR Console to listen to online servers before making a radio purchase decision.

First thing I notice is that it will not let me set any filter width wider than 4K in LSB and USB modes. Is it...

Evening all

I'm using SDRConsole v3.1 beta on Windows 10 (Home and Pro).

I have created and can select any one of 3 palettes in the palette table.

But when I restart the program the the palette is a default one, which does not appear in the...

for reasons unknown, including I am very new to RTL-SDR and all the software consoles available, I cannot demodulate the NOAA weather broadcast on 162.55MHz. Other consoles such as SDR# and HDSDR work fine. In the case of SDR Console V3, no matter...

Hi,

I'm guessing my problem may be quite niche but it's still very furstrating... to cut a long story short I'm running SDRC 3.1 build 2496 under a Windows 11 ARM Insider Preview (Activated) virtual machine using the latest version of Parallels on...

Hello All

I, like most users of SDR Console, love the software and its lovable cantankerous Creator, Simon.

Yes we do.

That said, these gawd-awful Google Ads are ruining the site (IMO) and making it nearly impossible to find what is of interest...

I finally got a HUPRF PAT board installed and working after finally figuring out where to enter the FT-991A IF freq. Yea!!!

In SDR Console I can tune to a freq with a mouse-wheel-scroll over the freq display and I go to that freq. However, if I see...

hello world,

I don't understand why there is a center spike shown on all bands all frequencies?
I have looked and checked if I can get rid of this center marker as seen in other SDR software programs but cannot find anything?
I am assuming there...