It's all about the Software

I am using the latest version of Console with an Airspy HF Discovery, bandwidth set at 912kHz. I would like to make IQ recordings of the entire MW band from 530kHz to 1710kHz. I tried using the MW settings in Favourites but the resulting recordings...

Hello,
I want to record more than one audio stream within 500khz of bandwidth with only one SDR. I am trying to record NFM Local EMS and NFM Local LEO. Is this possible.
If I use data recording it has too much dead space and takes up to much...

Hello
I'm having problems with my new windows 10 computer.
the sdr console frequency is fixed and cannot be changed, I can punch in new frequency but the spectrum stay's the same .
I can zoom in and tune in to stations on the frequency span that the...

Hello,
I have SDR console V3,2 installed and running fine with Airspy SDR+Discovery. Also working fine with web based SDR's. However I have not been able to get audio from Headphone jack into external powered speakers- always coming from Dell...

Hi
I probably forgot a parameter in my SDR Console setup using a RSP1A and a Yaesu FTdx via Omnirig.
At the start of SDR Console the «External Radio» window starts automatically and shows the frequency of the TX from Omnirig as expected but the main...

I have 2 receivers windows open both on different frequencies, is it possible to monitor the audio from both at the same time without having to mouse over each window

I am trying to make up a database of some local frequencies but I cannot get the list added to the software, the Add to Database button is always disabled.

Does anyone have a sample csv with populated data I can look at please

Anyone try using a QDX with SDRConsole? Recent firmware has allowed a I/Q output, so the full 48khz bandwidth can be used. Someone on their forums mentioned he was able to get it working using one of the existing radio entries, OmniRig and the...

Anyone else?

Only on the 2Mhz bandwidth setting and not on any of the other bandwidths , win10 64 , symptoms are all is going well then all of a sudden whether just listening (no interaction with the gui) or actually interacting like zooming or...

Hello,

Any way to use an Icom RC-28 rotary encoder with program ?

If not, what's the physically smallest similar item that will work ?
Very limited desk space.

Thanks,
Bob

Hello,

Blame my ignorance on old age now.

How do I select the Virtual Audio Cable (VAC) as the audio output ?

How do I configure it ? Trying to feed the Navtex decoder YAND via a new Icom R8600 and Console.

I understand the program has this as...

I use the auto-mute function to mute SDR Console when I'm transmitting. When the audio recovers, is mutes again, then recovers. The double process takes long enough that I miss the first part of the QSO or Callsign of the caller. What am I doing...

Well that's what i think it looks like travelling across the screen , they can go up (left to right) or down (right to left) and a laugh to look at , also associated with a chirp sound .

They be an Ionosonde
if anyone was wondering , one can see...

Is there any way to lock the zoom level? I zoom in/out to a preferred bandwidth and when I mouse-click a frequency, the zoom changes back to the middle of it's zoom range. I'm constantly zooming in/out, mostly out. I like to see a larger bandwidth....

Hi,
Not sure if it is the rigth forum. If not sorry.
Any one his using SdrConsole with Yaesu FTDX10 ?.
I can receave a local Fm broadcast staions but no HF ones.
May you help me ?.
Tnx & Merry Christmas
J. Cabot C31lk

MY SDR is not working, I have waterfall but am unable to get any signals. I thought I would uninstall and start over but am told each time that I lack administrator rights to uninstall the SDR software. I also learned I have 3 copies of SDR on this...

When changing the frequency on the frequency menu the spectrum doesn't change it keeps tuning to the same frequency, the only way it changes is by stopping the module and re-starting it. Any ideas on what am I doing wrong?

Will SDR Console run on Windows 11?

Can I tune multiple receivers and route each output to a separate virtual audio cable?

Greetings all,

I had SDR Console working perfectly on my IBM ThinkCentre computer and had to do a computer reset. Ever since the reset and fresh install of SDR ConsoleI can only hear the audio thru the PC speaker. I cannot hear audio thru the sound...

When using SDR-Console in BC-FM mode (listening to a local radio station) I get quite bad distortion. I have been through all the settings to try and eliminate this but to no avail! :roll:

I've taken a video which I've posted on youtube, however,...

What are the spikes I can see tonight in the 6 Mtr ham band? Is it noise or harmonics of some frequency?

It looks like harmonics to me

Screenshot-2022-11-06-182038.jpeg

Hello,

I have a problem with SDR Console 3.2 lately.
Using WIN 8.1.

Since a couple of weeks when the SDR Console is started after I start the notebook from sleep mode.
The SDR Console starts and the waterfall is working but without any signal show...

Hello Simon and all,

I am just returning to the hobby and to this software, after spending most of the last two years in hospitals.

I am rusty. I have been unable to adjust either the software, or my video settings, to make the fonts and their...

I'm just wondering if any hams on here have a setup with their tranceiver and SDR Console, so they can monitor the ham bands on both SDR and their tranceiver on receive and be able to monitor their own transmissions on the SDR console on transmit...