It's all about the Software

hello, I have a small problem on a friend's SRD server, the server starts fine, it is visible on the monitor, port 50101 in TCP is open, the port forwarding in the box is OK, the parser -feu is OK, and from home I connect to his server without...

Hello ...
I wonder how I can feed an I-Q stream from external source LIVE into SDR-Console for displaying ??

73 , Jens / HB9JOI

hello, I have a little problem with SDR SERVER MANAGER, I can connect but with one (1) person maximum, it is impossible for 2 or 3 to connect to this sdr server, I opened the ports, etc. everything works well, but the problem is when 1 person...

Salve, non so se è possibile 2 BANDE diverse in simultanea, poi colori su le parti bianche o grigie sopra i vari tasti che non si vedono per alcuni . Grazie

Salve, non so se è possibile 2 BANDE diverse in simultanea, poi colori su le parti bianche o grigie sopra i vari tasti che non si vedono per alcuni . Grazie

HI .. Very new here although i have searched through forum for an answer .. but to no avail .. but i did try .
Using Server Sdr
RSPA1 V3
WIN 11
I have Static Ip my computer
My Internet ip is Static
set up port forwarding with port 50101 but when...

Hi Everyone,

Running Server 3.3 build 3195.

Setting up a new station and PC. I was able to add my Pluto SDR to the Console Application. When attempting same with Server Manager , I noticed that Pluto SDR was missing as a supported radio from the...

Hello everyone, I would like there to be the tune in beat 0. much lower power than it i some color for the keys and cushions Thank you

Version 3.3 Build 3048 , i just updated to the latest version August 1st 2023 and very nice .
I really like the auto upgrade feature (one just runs the downloaded exe) and so far it does not mess anything else up like the saved memory's and Markers...

Does anyone know how to make memory tabs B and C look like D?????
I find all the tabs are a bit too busy and distracting for my taste
Capture.PNG

Dear all,

I am running SDR Console Server/Client configuration at my home over a LAN network (between a garden house living room).
The problem is easy but frustrating. As soon as I launch the Console Client, I always need to set-up all the radio...

I used SDR Console this morning to track the EO-88 satellite as usual and all worked well.
This afternoon I started SDR Console and it will not go past the start up screen.
It does not get to the receiver selection panel.
If I click on the select...

Due to thunderstorms in the area tonight. Will get back on air in the AM.
Stronger ones expected late in the day on Monday, so expect more of the same of shutdowns and disconnects of antennas.

73 Kriss KA1GJU
PS- My SO-239's were snapping after...

Does nothing when trying to operate.

Here's what I copied:

Connecting to 81.174.138.141::50101
Connected
Sending
Reply
XML: <RadioDefn Accounts="" Address="3652E880ECDC38D3" Bandwidths="" DllID="Airspy...

I have a server with one radio & one account. It is setup to allow only LAN connections & works well.
However, I can only make one connection to the radio. Another client cannot connect because the radio is in use .
Is this normal? I had hoped I...

Goodmorning everyone

I have a stupid problem:

Last night I made a IQ recording, but when I try to open it the file is opened by the program which normally opens .wav files. i have changed it to sdrconsole but no result.

anyone a idea ?
greetings...

Hello,

I tried to put my RSP1A into the sdr-serverworld.
I see my RSP1A in the list SDRSpace.com with a green tick.
Everything looks fine in my servermanager.
The service is runng and the on-air status is ok.

But if I try to connect my SDR via...

Hi everybody,
is there any alternative way to connect
to the Server other than SDR Console itself?
I mean, at home I have no windows pcs,
can I connect from android or ios or mac, trough
some apps or web interface?
Thanks, Antonio.

I would like to operate my SDR from the comfort of my armchair using a second laptop computer and thought I could use the remote server feature for this. I tried the streaming option but I'd like to do bandscans on multiple bands and streaming...

Hi @ all,
i installed the Server Manager and there is a limitation to 1 mhz. Is there a possibility to change it to 2 mhz in a config file oder something like this?

Manuel

I'm just getting started with SDR Console working with my LimeSDR USB device. I have tried to set up the SDR Server Manager but it cannot find the LimeSDR when I Search in the Radio Definitions panel. Is LimeSDR supported by the Server Manager app...

Hi, all:

Does the Server Map show the SDRC servers that are online? I've never seen anything there, other than the list form.

I tried searching the board, but the search term server map only returns this...

Information

The following words in...

Hello,

I've been playing with the server lately. I recently relocated and have more room and a quieter location. So I decided to use some of my spare SDRs as servers.

It wasn't too bad and I found answers to almost all of my questions on this...

Hi Simon and all.
When trying to make Scheduled Recordings via a server connection I get Timeout error when the recording is about to start.
SDR-Console 3.0.27 Build 2143 on a Dell Laptop i7 6920HQ on Win10 OS.
WAN connection is 100/100 Mbits/s at...

I am using a Airspy HF+ with a remote server on my LAN. If I use SDR-Console server the receiver sensitivity is significantly lower than it should be. Using the same radio with Spyserver, the sensitivity is as expected. For this comparison all the...