It's all about the Software

Currently, sample rates for the HF+ Discovery are limited to a range of 192 to 912 kHz.
Occasionally, hunting for weak signals, a very low value (e.g. 32 kHz) can be useful.
Would anyone else be interested in this addition?

I have a really annoying problem with SDR-Console, AirSpy HF+ and Windows 11. It has to be some weird setting somewhere in Windows 11. Here is short description about behavior.

Everything works fine for a while, but if I reboot or disconnet...

Hi All.
Does anyone have a schematic or maybe knowledge about what the D1 component at the HF RF-input has as type designation?
It is placed in the very close vicinity of the input connector as the very first component after the HF input connector....

Hi board , im Sandro from Milan , Italy
I'm just owner of this good SDR and i'm trying to use SdRconsole V3.0.26 build 2088 .
I have an Wellbrook Loop Ala 1530

Issue is related to audio feedback that on SdrConsole is a little distorced some fading...

Hi,

Thought I's pass this along to see if anyone else is experiencing:

Trying to use with an Airspy HF+ Discovery.

When selecting in the Select Radio Screen, won't accept the Airspy as a valid radio.

But, if I plug and unplug the USB output from...

On February 7 I bougjht some items throughout Airspy.us they have a horrible service don’t have inventory are they functioning?

Hello,

Does Console support the Airspy SDR's ?
If so, all models ?

Any thoughts on Airspy (model ?) vs a RSPdx ? Pros and cons, etc. ?

R.

Listening to my Discovery using v3026 & getting audio clipping on LSB 80M. I have had this issue many months ago, posted the issue on the IO group & then it seemed to just disappear. When this happens the Audio: gage (latency??) at the bottom left...

Hi,

Hopefully this is the correct forum for this and I haven't missed a reference to this issue already...

I'm using SDRC 3.0.26 on a Bootcamp (MacBook Pro) installation of Windows 10 and also on a 2015 Dell Latitude E7250 and am experiencing...

Hi all.
Has anyone had any trouble with the SpyServer on later (the latest) revisions of SDRC?
I had prepared two RSP3, one with a RTL-Dongle and one with a AirSpyHF+ (two connector version) say ~a year ago and they both worked fine then.
I have not...

IS there a way to enable the Bias-t function on the latest version of SDR Console for the Airspy R2? I want to be able to use the Spyverter with the R2.

Thanks,

Glenn Blum

Simon
Why be so categorical!
You should never say no!
The other Airspy I own you created with the possibility of adjusting the visual gain to - 40 dB
Why not allow this possibility for the Airpy R1 in order to also obtain a visual gain also at -40...

Dear All
May I know is console v3 support airspy spyverter?

I have one and like to use it with my airspy mini which can be receive below 24M

But I can not let it works , in sdr sharp is fine ,but i like v3, it is nice and friendly software...

Hello Simon
For Airspy 1, could you allow visual gain adjustment to -60
On the two attached screenshot, I hit -30
My Airspy 1, works without a preamplifier
Best regards

Linear.JPG Sensitive.JPG

I did a search here on HDR and nothing came up.
So here is the question: Is there a procedure/instructions on how to activate HDR on a HF+ Discovery using SDR Console?

Thanx - Bob

Had a wierd one today.

Took my recieving station completely apart as part of a reorganisation here.. when I put it back together, on testing MY HF+ (I have two) I found that performance was degraded and I only had the original number of bandwidths...