It's all about the Software

Can someone help me fix this issue? I have Omnirig v1.20 and version 2.1.0.0 installed in two different areas of my system

Thanks for your help.

SDRC is nearly the PERFECT program for working satellites. The only place it is lacking is when running an external radio, there is no provision for having the External Radio Transmitter and the Internal Radio Dongle Rx track when running...

Dear Sirs,
Im using a RTL Stick and Omnirig as Panadapter on my FT-950 an it works very well.
Usulay the computer audio is turend off and I'm working only with the Waterfall BUT sometimes I like to use the Computer Audio special for weaker...

I downloaded the 3.0.26 version of the SDRConsole (v3) to update my 2.0.20.

All is running nice.

I wish to link the program to my Icom IC-7000 through the Omnirig 1.19 for freq CAT control.

Now my Omnirig are in well relations with MixW3, JTDX,...

Hi all,

I have a problem with frequency synchronization with SunSDR2PRO. Both SDR Console and EESDR are set to OmniRig. After switching on, the frequency is synchronized, but only once. The same configuration with the FLEX6500 works perfectly. Has...

:)

Hi all,

I have a problem with SDR Console when I want to use my FT-817 or my FT-857 with external radio option. I receive the error message Port busy and/or offline . To cancel it and make the external radio working, I have to remove and reinsert...

Hello All

I -think- I'm consistently seeing a buggish interaction between SDRC (3.0.22) + WSJTX (2.1.2) + Omnirig (1.19)

whereby SDRC autonomously changes the rig from DATA/PKT to USB (Upper SB), FT817 w/FT817 rig selection

Steps :

1. start...

Hi
I tried to connect Ham Radio Deluxe (HRD) with SDR Console (SDR) with no success. Then I monitored the traffic on the COM ports and saw: com6Monitor1.xlsx
After a request of HRD on the COM port SDR sends its answers from a one-byte buffer. This...

After a struggle with consistent external radio port online status (and configuring Omni-Rig correctly),
I decided to go back and start from scratch, more or less. I would like to understand what the purpose/
requirements are for the check boxes...

Hi,

When using the external radio option is it fully integrated with SDR Console, e.g you can control mode, PTT, drive etc all inside the software?

Or is it just basic frequency synchronisation?

Thanks

Hello again...

got rid of the ftdx1200 and now have a ftdx3000..lovely rig..

trying to get it to work with sdrc as external radio.
no hope..(except for once yesterday, and i have NO idea how!!)

using serial to usb to pc.pc sees it and says all...

Hi,
anyone got the IC-705 working with SDR-Console?
The Omnirig INI files can be found here:
But can not get this to work with SDR-Console. It works fine with PST Rotator.
//Lars SM0TGU

Is there such a thing?
I can't get it to work. Sometimes it seems to function briefly, but most of the time it just doesn't.
There are a million different settings I could alter in SDRC and in Logger32, and it feels like I have tried most...

I have an AOR 5000 and a Icom R8500 that I want to use with Console. I'll use one or the other. From I can tell I might need a radio specfic dll file to operate the radio with Console or OmniRig. Is that correct? If not please let me know what I...

I use a Kenwood TS-480 as the transmitter in conjunction with SDR Console. Works great. I am unsure and confused about how to synch the two frequencies. They are very close but other hams have commented about me not being squarely on frequency....

Hello,

I'm trying to set up SDRC for CAT control of my FT-817 to work QO-100. I've followed the setup instructions at

The screen says the FT-817 is Online and when I change the rx frequency a new tx frequency appears in the External Radio box,...

Hi Simon

Yaesu ftdx1200.. omnrig elad duo.. serial to usb adapter Sdrc 3.025 using duo as panadapter and added rx capability.

Everything perfect.except mute audio and reduce iq data by x does not work.

Can setup mute by transmit options/ mute rx...

Is there a way to have SDRC display cluster spots in the spectrum window?

Thanks,

John
G4DRS