It's all about the Software

I'm currently running a HP Prodesk 400 G3 SFF, with a i7-6700 and 16GB ram.
A few years ago I was searching for a graphics card that would fit the SFF case, and ended up purchasing a Geforce GT 1030 2GB GDDR5 low profile card.
It was one of the few...

Hi,
I am considering building a small, low-power system using this board:

I see that the Intel® Celeron® 6305E Processor has internal UHD GPU with OpenCL 2.0 support. The idea is to use this for remote monitoring over RDP. Do you think this CPU...

Is there anyway I can store 10 freq (Air Traffic Control) and just scan those 10 freq?

Adelaide Approach (East of Adelaide) 118.200
Adelaide Approach (East of Adelaide) 130.450
Adelaide Approach (Kangaroo Island) 123.050
Adelaide Approach (North of...

(also posted in groups.io)

Hello, friends.

Last fall, I built a new computer around an AMD Ryzen 9 5950X with 64GB of RAM. I used my old video card, an Nvidia GeForce GTX 1070 Founders Edition with 8GB of RAM.

I want to put that card back into my...

Hi all,

For some time I see people struggle with the question if their present computer of a one he or she wants to buy works fine when using SDRconsole.

It can be a guideline. Items like CPU model, memory, GPU, SDR model, used sample rate...

Just for grins, I loaded the latest SDR Console beta and SDRuno 1.41 on to my 2012 HP Pavilion g-series laptop (AMD A6, no gpu) running Win 8.1. Both appear to run just fine. 7.4% on the cpu for Console is quite respectable, I believe. :)...

Not sure exactly where to put this, but as it's an SQLite specific question rather than Console, I've put it here.

I have two SQLite files:

1. The RDS log from a recent opening... generated by playing back an IQ recording. In this case a massive...

Hi all,

Seems a nice site with lots of candy for the SBC adepts. I can see several models that could work nice with the Console. The prices seem affordable.

73' Ron

Hello,

apologies if I'm not right here. Maybe somene can help me out. In SDR-Console I always have a noisy peak in the center no matter where I go (frequency, band...). Unfortunately I didn't find a possibility to get rid of it.
In Cubic SDR the...

I have recently moved to a new ultrabook computer, a Lenovo Thinkbook 13s Gen 2. This notebook has the Intel i7-1165G7 processor with 96 EUs on the integrated Xe graphics. I've previously run SDR-Console on an nVidia dedicated GPU with CUDA enabled....

Hello everyone,

I would just like to briefly report that I have successfully put Simon’s excellent SDR console into operation on a MacBook pro M1 with Parallels (Beta) and Windows 10 (ARM Dev.), have already had several successful qso via ES'Hail....

Hello everyone, especially Simon as developer.

I have a problem to start SDR-Console after sucessful installation under Wine / Linux Mint. Here I have a Screenshot of the Error-Window:

Bildschirmfoto vom 2020-11-07 20-23-06.png

Ialso saved an...

Given the current lack of any decent GPUs at sensible prices I been looking at cheaper available options that will give me dual monitor output.

How does the MSI GeForce GT 1030 2GB OC card fare for CUDA performance, I did look on the Nvidia site...

73!
I want to use an laptop with windows XP :lol: and RTL-SDR RTL2832U USB doogle.
Please someone could send me a version 2.x that works with windows XP.

Tnx

IV3RCH Marco

Hi everyone,

my new PC Spec

Win 10 Home 64bit * recently updated win 31/03/21 which could be problem as before the update it worked)
cpu AMD Ryzen 5 2600
16 GB ram
Geforce RTX 2060 2047mb Zotac

i updated nvidia drivers to 465.89
SDR Console...

Had my first QSO with fellow Hermes-Lite user and long-time constructor Mike Grierson G3TSO yesterday, I was using the barefoot Hermes Lite. He said it sounded well.

My questions relate to the 'OP Power' control in the Receive window, section Radio...

Hello,
I've a sdr from nooelec correctly installed on my Windows 10 64 bit (v. h2n). I've installed the sdr console v3.0.26 and I add correctly my sdr dongle usb (NooElec NESDR SMArTee XTR Premium), so I see all radio transmission signals on bar but...

It's surprising how small a platform SDR-Console will run on, providing you don't run too much else. I run a Linx 10 tablet with 32bit Windows 8 - it's my only portable device. A quick trial with SDR-Console to the hermes lite via wifi was no good -...

Grateful advises on buying new notebook for limesdr, limesdr mini or ADLIM Pluto, first for QO100 ssb rx tx and may be later, 200 kbps or lower datv (not sure what software).

Will this fast enough and still some space for future growth?

11th...

Greetings...

Decided that trying to upgrade an old computer was not worth it.

Now, I'm looking at a new machine with following specs:

Intel Core i3-10100 3.60 GHz
Processor Main Features 64 bit Quad-Core Processor
Cache Per Processor 6 MB L3...

Greetings:

Simon recommends either a GT730 or a GTX950 on the SDRC website. Currently using a GT730, but not happy with it. The GTX950 documentation says a 350 Watt PSU is needed, but my little Dell has only a 255 Watt PSU. Any recommendations for...

So, maybe this is slightly off-topic but it may bite you some time. I'm not sure if two events are related so I will mention both. I leave my machine on pretty much 24/7. It is an ASUS P8Z77WS motherboard with an I7 3770 CPU. I bought the...

I am contemplating about using my older dual core 2.8 with 8 gb of ram wired using SDR Console server. could it be worth while?

I am trying to free up some CPU% while using SDRC with the RX-888 and hoped to gain by enabling CUDA on my GTX580 Nvidia graphics card. The GTX580 is old (~10 years) but does have CUDA (confirmed in CUDA diagnostics). However, when I enable CUDA in...

Hi, short and simple question.
I am checking the settings over and over, i want to change the path to the screenshot location to another one.
where could i change this path? i have found it for the recordings and changed that one easy but.. now for...