It's all about the Software

Am I missing something? I am using the program to receive weather satellite pictures and have the doppler correction turned on. I don't see the frequency change as the satellite goes over. I see the doppler correction change, but not the main...

Hello - I'm trying to understand how to set up SDR-Console's satellite tool to automatically record satellite I/Q data based on the schedule. I can't quite figure out how to set up and enable automatic recording. I opened the Automatic Scheduler...

Greetings,
Is there a way to set a (fixed) XIT (Transmit incremental tuning) on a per radio basis?
I have two different radios (on OmniRign radio 1 and 2) an need to align them to my
receive frquency. I use the SDR-RTL dongle RX

BTW: what is the...

Hello,
I am trying to do FT8 on QO-100 with an Adalm Pluto SDR, on a 90 cm dish with a Othernet Bullseye LNB which is pretty stable
My Pluto has a GPSDO clock and I use the Geostationary Beacon feature, there is no drift at all.
A virtual audio...

Hello,

I am using SDR-Radio (v3.2) for QO-100 with a Pluto SDR. All working fine from the operating standpoint.

Now, I am wondering if there is a way to set the program up so that the TX frequency (on 2.4G) is sent via CAT rather than the RX (and...

I would like to be able to click on a signal and then transmit, knowing that my Tx frequency is correct. Is there a way of locking the Tx and Rx together, please? Perhaps I have to manually fiddle with the down converter frequency until it matches...

Some questions on use of SDR-Console and WxtoImg, I've had some success and a lot of frustration trying to get the best from NOAA passes.

I'm using SDR-Console V3.1 Build 2572, RSPDx and VBCable to route the audio from SDR-Console to WxtoImg and...

When tracking satellites my rig sometimes changes freq that is not what satellite tracking wants to do.

On the website I see:
Do NOT start a radio in this window and start the External Radio built into the console window - they will conflict with...

Feeling a bit embarrased.
I have been experimenting with satellites using the latest release of SDR-RADIO v3.1 Build 2496.
I ran with the catalogue.tle from Celestrak quite successfully although the 4MB file took a few minutes to load everything...

I am still getting familiar with this program & apologize if this has been covered before.
I have created a custom group of about 70 satellites including ISS.
When I go to the passes list, ISS doesn't appear in it.
Even if I set the time to 4 or...

Hello, I'm a bit lost and strugling with the combination of SDR Console - MyDDE v1.05 and a SPID rotor which uses spidmd01dde-soft-120.exe for driving a MD-01.

When I'm using orbitron, the whole chain works like a charm, the MyDDE client gets the...

I hope this is a new question. I have searched but found nothing. I have seen screen shots from other OMs that show the markers in the waterfall. How can I move them from the upper screen to the waterfall?

Hi Everyone,

Using SDR Console v3.1 build 2320. Having trouble getting automatic satellite pass recordings to work consistently.
Steps
Start radio
go to Satellites page and turn on Autoschedule and Tracker
screenshot.623.jpg
go to records tab...

Hello,
in the Satellite External Radio window, it is possible to change frequency of the connected external radio with mouse click or mousewheel over the displayed frequency.
Question: is it possible to control frequency change with keys / shortcut...

Just setting up, and getting used to SDR-Satellites.

I have gone into and created a list of 21 amateur radio satellites I want to track.

Instructions on the Satellites support website say Press the Select button in the Home pane of the ribbon...

Gentlemen,
Just getting back in to satellites after a couple of years absence. Hasn't the program changed in that time. One feature I was waiting for that has been added is the auto scheduling of satellites.
The feature is working fine as I want to...

Ok, what am I doing wrong: Running a fresh install of sdr-console 3.0.27, trying to follow the guidance under Satellites on the sdr-radio home page

When i bring up options, there is no Home/Lat Long option that i can find
I am flabbergasted, how...

Ok so I am running the SDRplay rsp1a. I am finding when I switch birds say from a USB bird to SO50 the mode will stay in usb. Its happens with auto on also. Any ideas?

Hi there, console has been working fine, with QO 100. I use the geo beacon to lock my LNB ( modified high stab xtal oscillator, so generally of by about 10kHz max.) No problem, but tonight the beacon lock keeps drifting off, I re centre it ok for a...

We have a project for a spacecraft in low earth orbit which should have an X Band downlink. Although intended for ranging activities it should also be possible to use it as a linear transponder (with a L Band uplink).
So a question...is SDR Console...

Hi all satellite users!
With the help from Christophe from AMSAT France a lot of Satellite Custom Data XML files has been auto generated. I have then manually edited some of the most used satellites.
You can download all these XML files from this...

A rather trivial problem. Some how I managed to move my sat schedule window, that had always been of the right hand side of the map display to be floating. When I try to dock it, it goes to the left hand side of the map. If I try to move it back to...

Good afternoon.
I have a SDR Console running with a Pluto for QO-100
I would like to access that from remote.
The software locally is running and I can RX (and TX) QO 100.
I did all the procedure to run the server manager, and I can access from...

... the PSK-beacon presently struggles with some stability problems with direct correlation to the SDRC synchronisation function. Amsat knows the issue. Don't worry.
DC6NY

Hello,

I'm trying to get used to the Satellite part of the software, to track LEO birds, and while I notice all is setup properly and the SAT are tracked at their correct timing in the map, then when I display the Automatic Schedule window, I see...