It's all about the Software

When tracking satellites my rig sometimes changes freq that is not what satellite tracking wants to do.

On the website I see:
Do NOT start a radio in this window and start the External Radio built into the console window - they will conflict with...

Feeling a bit embarrased.
I have been experimenting with satellites using the latest release of SDR-RADIO v3.1 Build 2496.
I ran with the catalogue.tle from Celestrak quite successfully although the 4MB file took a few minutes to load everything...

Am I missing something? I am using the program to receive weather satellite pictures and have the doppler correction turned on. I don't see the frequency change as the satellite goes over. I see the doppler correction change, but not the main...

I am still getting familiar with this program & apologize if this has been covered before.
I have created a custom group of about 70 satellites including ISS.
When I go to the passes list, ISS doesn't appear in it.
Even if I set the time to 4 or...

Hello, I'm a bit lost and strugling with the combination of SDR Console - MyDDE v1.05 and a SPID rotor which uses spidmd01dde-soft-120.exe for driving a MD-01.

When I'm using orbitron, the whole chain works like a charm, the MyDDE client gets the...

I hope this is a new question. I have searched but found nothing. I have seen screen shots from other OMs that show the markers in the waterfall. How can I move them from the upper screen to the waterfall?

Hi Everyone,

Using SDR Console v3.1 build 2320. Having trouble getting automatic satellite pass recordings to work consistently.
Steps
Start radio
go to Satellites page and turn on Autoschedule and Tracker
screenshot.623.jpg
go to records tab...

Hello,
in the Satellite External Radio window, it is possible to change frequency of the connected external radio with mouse click or mousewheel over the displayed frequency.
Question: is it possible to control frequency change with keys / shortcut...

Just setting up, and getting used to SDR-Satellites.

I have gone into and created a list of 21 amateur radio satellites I want to track.

Instructions on the Satellites support website say Press the Select button in the Home pane of the ribbon...

Gentlemen,
Just getting back in to satellites after a couple of years absence. Hasn't the program changed in that time. One feature I was waiting for that has been added is the auto scheduling of satellites.
The feature is working fine as I want to...

Ok, what am I doing wrong: Running a fresh install of sdr-console 3.0.27, trying to follow the guidance under Satellites on the sdr-radio home page

When i bring up options, there is no Home/Lat Long option that i can find
I am flabbergasted, how...

Ok so I am running the SDRplay rsp1a. I am finding when I switch birds say from a USB bird to SO50 the mode will stay in usb. Its happens with auto on also. Any ideas?

Hi there, console has been working fine, with QO 100. I use the geo beacon to lock my LNB ( modified high stab xtal oscillator, so generally of by about 10kHz max.) No problem, but tonight the beacon lock keeps drifting off, I re centre it ok for a...

We have a project for a spacecraft in low earth orbit which should have an X Band downlink. Although intended for ranging activities it should also be possible to use it as a linear transponder (with a L Band uplink).
So a question...is SDR Console...

Hi all satellite users!
With the help from Christophe from AMSAT France a lot of Satellite Custom Data XML files has been auto generated. I have then manually edited some of the most used satellites.
You can download all these XML files from this...

A rather trivial problem. Some how I managed to move my sat schedule window, that had always been of the right hand side of the map display to be floating. When I try to dock it, it goes to the left hand side of the map. If I try to move it back to...

Good afternoon.
I have a SDR Console running with a Pluto for QO-100
I would like to access that from remote.
The software locally is running and I can RX (and TX) QO 100.
I did all the procedure to run the server manager, and I can access from...

... the PSK-beacon presently struggles with some stability problems with direct correlation to the SDRC synchronisation function. Amsat knows the issue. Don't worry.
DC6NY

Hello,

I'm trying to get used to the Satellite part of the software, to track LEO birds, and while I notice all is setup properly and the SAT are tracked at their correct timing in the map, then when I display the Automatic Schedule window, I see...

Hi All:

New to SDRs and this software, so I might be asking something obvious. I see a selection for recording, and a checkbox to record IQ data, but none for audio? On the sat status page it says yes for recording IQ but no for audio. Any...

I notice that there is a 5-6 minute difference in the ISS AOS/LOS times between satellite tracker in SDRC versus the prediction in PstRotator. Both applications have the exact Lon/Lat . Any ideas on how to resolve this? As far as I can tell, the...

Ok, thanks to info from Lars I have PstRotator . SDRC and PstR are simultaneously with my IC-705 via OmniRig , however, I would like to have both SDRC and PstR recognize each other. I have SDR-Radio selected in the tracker section of PstRotator but...

The option Geostationary Beacon seems to be limited: Differences (Delta) Beacon frequency - displayed frequency < -100KHz are not selectable. This is a pity because the shift on my pluto is about 110KHz.
Is there a workaround?
tnx Andreas

Recently updated Console. Use WXtoIMg to display the NOAA Polar Orbiters. Now the display appears to be of an incorrect audio sampling frequency. Used SDR Play 1A, thought perhaps the problem arose after updating to UNO 1.4. But, replaced SDR Play...

I just finished a permanent Inmarsat antenna made with an outer net patch antenna and a NooElec LNA which is connected to an Airspy (first edition) with a Bias-T feed. This contraption is partially mounted between some bushes so its quiet a stealthy...