It's all about the Software

Hello everyone.
What is the procedure for adding provisional TLEs for a new satellite not yet referenced on Celestrak?
I'm using SDR Console v3.4.
Thank you in advance.

Pascal - F4IKX

Hello,
About 5 years ago, I set up an FT-817 and an RTL-SDR with SDRC. It worked perfectly, sats were tracked, doppler was corrected, I found stations on the waterfall and just pressed PTT on the microphone to work them. Now, I'm trying to get back...

I still could not get SDR Console to show antenna selection with my SDR Play RSPDX-R2 but I had it working on ant A. It was tracking frequencies with satellites when I click on the various ones that were within my footprint in the passes. However,...

Hello,

I am trying to perform an analysis of the LNB's LO drift (prior to its modification) using any usable Oscar 100 NB beacon signal.
To do that I want to grab a 192 bandwidth and route it through virtual audio cable to the Spectrum Lab for...

Hello,

I am using SDR Console to receive NB signals from Es-Hail 2.
To compensate for the LNB LO drift I use geostationary beacon feature.
Unfortunately spectrum plot of the plugin is freezed to the frequency range which does not always allow me to...

Recently updated Console. Use WXtoIMg to display the NOAA Polar Orbiters. Now the display appears to be of an incorrect audio sampling frequency. Used SDR Play 1A, thought perhaps the problem arose after updating to UNO 1.4. But, replaced SDR Play...

I am trying to use the Satellites Option and GPS to establish my location. I have a u-blox card that connects and finds my location very quickly but does not enable the buttons to Set Time or Location. Is there a user guide for this option? Thanks...

Hi there

I was wondering if anyone has experience making plugins for sdr-console?

The idea is to have sdr-console send UDP message to the minitiouner radio device eg: 232.0.0.11 with and message like this :...

When receiving pictures from the NOAA satellites everything is fine for several days and then the pictures are highly distorted. I have racked my brain trying different setting, etc. to solve the problem. I found that if I change the audio out from...

Hello - I'm trying to understand how to set up SDR-Console's satellite tool to automatically record satellite I/Q data based on the schedule. I can't quite figure out how to set up and enable automatic recording. I opened the Automatic Scheduler...

G'Day
I'm using the very nice sat-scheduler in SDR-C 3.3 and have set recording to automagic. However, according to the description it should save the file including the satellite name. My files are not saved with the sat-name. Have I missed...

With the new Meteor 2-3, I wanted to add it to the pass list and favorites ribbon.
I have long forgeot how to do that.
I can highlight it and click add, but it does not get added.
I checked the .TLE file and the satellite is there.
Help please on...

With a new Meteor 2-3 now in orbit, I would like to add it to my favorites and top bar.
I thought I remembered how to do that , but have failed every attempt.
I did check in the .tle to ensure the satellite was listed.
Can someone please smarten me...

Hello, I use an Adalm Pluto with SDR Console on QO-100, and I don't know where to plug the key, and if any special configuration is required.

Thank you for your answers.

73 de Michel F6GLJ

Am I missing something? I am using the program to receive weather satellite pictures and have the doppler correction turned on. I don't see the frequency change as the satellite goes over. I see the doppler correction change, but not the main...

Greetings,
Is there a way to set a (fixed) XIT (Transmit incremental tuning) on a per radio basis?
I have two different radios (on OmniRign radio 1 and 2) an need to align them to my
receive frquency. I use the SDR-RTL dongle RX

BTW: what is the...

Hello,
I am trying to do FT8 on QO-100 with an Adalm Pluto SDR, on a 90 cm dish with a Othernet Bullseye LNB which is pretty stable
My Pluto has a GPSDO clock and I use the Geostationary Beacon feature, there is no drift at all.
A virtual audio...

Hello,

I am using SDR-Radio (v3.2) for QO-100 with a Pluto SDR. All working fine from the operating standpoint.

Now, I am wondering if there is a way to set the program up so that the TX frequency (on 2.4G) is sent via CAT rather than the RX (and...

I would like to be able to click on a signal and then transmit, knowing that my Tx frequency is correct. Is there a way of locking the Tx and Rx together, please? Perhaps I have to manually fiddle with the down converter frequency until it matches...

Some questions on use of SDR-Console and WxtoImg, I've had some success and a lot of frustration trying to get the best from NOAA passes.

I'm using SDR-Console V3.1 Build 2572, RSPDx and VBCable to route the audio from SDR-Console to WxtoImg and...

When tracking satellites my rig sometimes changes freq that is not what satellite tracking wants to do.

On the website I see:
Do NOT start a radio in this window and start the External Radio built into the console window - they will conflict with...

Feeling a bit embarrased.
I have been experimenting with satellites using the latest release of SDR-RADIO v3.1 Build 2496.
I ran with the catalogue.tle from Celestrak quite successfully although the 4MB file took a few minutes to load everything...

I am still getting familiar with this program & apologize if this has been covered before.
I have created a custom group of about 70 satellites including ISS.
When I go to the passes list, ISS doesn't appear in it.
Even if I set the time to 4 or...

Hello, I'm a bit lost and strugling with the combination of SDR Console - MyDDE v1.05 and a SPID rotor which uses spidmd01dde-soft-120.exe for driving a MD-01.

When I'm using orbitron, the whole chain works like a charm, the MyDDE client gets the...

I hope this is a new question. I have searched but found nothing. I have seen screen shots from other OMs that show the markers in the waterfall. How can I move them from the upper screen to the waterfall?