It's all about the Software

Will we ever see SDR Console support TX capabilities for the Ettus USRP radio's, eg: N200/N210, X300/X310?

When are we to expect a new build/update with the latest Ettus UHD >ver.4.x.x?

Thanks for SDR Console ! It is my favorite. I am using Pluto Plus which reportedly offers 60 Mhz bandwidth. My SDR v3 running on Windows 8.1 on 64-bit PC only allows 6 MHz. How can I utilize more bandwidth in receive-only mode ?

Dear Simon,
Probably the best program is missing an option that will use the mouse wheel to zoom in/out and center the selected frequency.

To not loose the tune functionality, maybe tune when the mouse is on the waterfall, histogram or...

Dear,

simple feature to add in the External Radio Options menu, submenu Transmit.
Please add next to the Mute Audio checkbox a additional feature that will add extra time when the TX is going back to RX. There is some delay and I get very bad...

Having finally got round to finding where it is located I have to say this is a real game changer for checking for DX in the FM band. It took just over 3 minutes to load 5 hours worth of files at 1 line/sec resolution which can then be rapidly...

I have made band plans with overlapping plans. When plans overlap across the full width of the panadapter, The band text for the plans are on top of each other.

It would be valuable to move the texts in this situation to avoid text overlap....

Hi Simon,
after our messages on twitter, here I am to better describe converter definition needed for the C-band LNBs.
Currently UP or DOWN converters definitions are working subtracting or adding the local oscillator value (OFFSET) from the...

Hi,

I'm looking for a way to record voice from aeronautical HF USB frequencies, only when voice is activated. I've being struggling with this problem for a very long time, due to the constant HF background noise.

When I've attempted to do this...

Simon, is this feature still on the request (wish) list? We discussed it earlier this year but then the discussion died down.

Thanks...

Hello,

Please, is it possible to add this Genesis G11 transceiver to the list of supported radios ?
I know it is old one, but I build it myself, and I am very pleased with its receiver.

Thank you very much,

Best regards,

Dragan, YU1UO

SDR Console's FM squelch appears to work off of signal strength. This means that any change in the broadband noise level will cause the squelch to blow open unless it's set so tight that weak but perfectly readable signals won't open it. Noise-based...

Hi,

Using Console with a Icom R8600.
Work really well together, but it takes, for me, a little getting used to the locked
radio screen.

Is there any present way of accessing the scanning functions that the radio has while
being controlled by...

Hi

This is a nice feature but one wonders why it is not available to an active receiver rather than to random highest
signal(s).

It seems that one might appreciate adding of an enabling setting tor the current Active Receiver (even Active...

The ability to read at least a couple command line parameters might be nice.

The first is /i (or -i or --identity). It's parameter would be the identity name.
for example: /i HF SWL RX888 MKII

The second is /a , -a, or --autorun. A parameter...

Simon,

Would it be possible to add the solar information that you display in your World Map to Console? Either just above/below the Frequency & Span display or make it interchangeable with the Statistics display.

Thanks!

--
Mike

Hi Simon

I would like to ask, if there is a possibility to send only spectrum data and audio from the server to the client.
With larger RF bandwidth (e.g. 8 MHz from a SDR-Play device), the bandwidth of the I/Q data becomes way too large for WAN...

Hi Simon,
I try to make a request that was talked about some time ago, hoping to be able to describe it better and that you can have time to consider it.
Some converters have the OL frequency higher than the IF frequency and therefore it is not...

Please add support for multiple CW Skimmer instances.

Hi
The rig type FT897/857/817 do not allow Doppler correction via CAT during Tx period and working FT4 modes on the linear Sats is very difficult (only at elevations less than 10 degrees when Doppler shift is very small)
Is it possible to find a...

Dear Smon:
I am Jabi, ea2aru, and I am using and not have problems with your Sdr Console.But I have one question: for satelite QO-100 uploading DATV, Digital Amateur Television, I am using the Obs program. But not is incorporated the external relay...

432.133.23 should be 432.133.230
432.148.1 should be 432.148.100
...
...
432 should be 432.000.000

73, Max

QRG.PNG

I often turn the audio off during a qso on QO-100.

- Is it possible to enlarge the speaker symbol making it easier to hit with the mouse?
- I sometime use the space bar and m to mute and unmute, Is it possible to enable the space bar to also...

Hi,

Would it be possible to have a UDP listener or TCP to track N1MM or HRD.

This would free up com ports or com port splitters that are unable to work together.

73
Pat
OO7P

OK here is my scenario. I tune up at low power. Accidentally leave Tune power slider at Max. Turn on linear. Make some contacts on that frequency. Totally forget Tune slider is left at full.

Next time come to tune on a different frequency but...